• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.137-141
• /
• 1999

금속 다층박막과 미세입상 합금박막에서 발견된 Giant Magnetoresistance(GMR) 현상에 고무되어 최근에는 50년대에 밝혀졌던 산화물 자기저항 재료에 관하여 새롭게 연구하고 있으며 perovskite 구조를 가지는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 박막에서 큰 자기저항을 얻었으며 이를 Colossal Magentoresistance (CMR) 이라 부른다. 본 연구에서는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 분말을 하소온도를 700-90$0^{\circ}C$로 변화시킨 고상반응법과 자발착화연소합성법(Glycine-Nitrate Process) 으로 각각 제조하였으며 비교 분석하였다. TG-DTA을 이용하여 불순물과 미반응 물질을 확인하여 적당한 하소 온도를 결정하였고 XRD를 이용하여 결정상을 분석하였다. 주사전자현미경(SEM)으로 각각 제조된 분말의 하소후 입자의 크기를 비교하였다. GNP법으로 합성한 경우가 고상반응법을 이용한 경우보다 입자의 크기가 submicron 단위로 미세하고 균질하며 고순도의 perovskite 구조를 갖는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 분말을 얻을 수 있었다.었다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.882-884
• /
• 1999

금속 다층박막과 미세입상 합금박막에서 발견된 Giant Magnetoresistance(GMR)현상에 고무되어 최근에는 50년대에 밝혀졌던 산화물 자기저항 재료에 관하여 새롭게 연구하고 있다. Perovskite 구조를 가지는 $La_{1-x}Ca_{x}MnO_{3}$ 박막에서 큰 자기저항을 얻었으며 이를 Colossal Magentoresistance (CMR)이라 한다. 본 연구에서는 $La_{1-x}Ca_{x}MnO_{3}$ 분말을 고상반응법과 자발착화연소 합성법(Glycine-Nitrate Process)으로 각각 제조하였으며 비교 분석하였다. TGA을 이용하여 불순물과 미반응 물질을 확인하여 적당한 하소온도를 결정하였고 XRD를 이용하여 결정상을 분석하였다. Dilatometer를 이용해 $1400^{\circ}C$까지의 열팽창율을 측정하였다. BET로 비 표면적을 비교하였으며, 주사전자현미경(SEM)으로 각각 제조된 분말의 입자상태와 입자성장을 확인하였다. GNP법으로 합성한 경우가 고상반응법을 이용한 경우보다 입자의 크기가 submicron 단위로 미세하고 비표면적도 수배 컸으며, 고순도의 perovskite 구조를 갖는 $La_{1-x}Ca_{x}MnO_{3}$ 분말을 얻을 수 있었다.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.72-80
• /
• 2003

Phosphoric ester compound was employed as thermal resistant and flame retardant for chlorinated polyethylene(CPE) rubber material which is used to prepare automotive oil cooler hose. Cure characteristics, physical properties, thermal resistance, and flame retardation of CPE rubber compounds were investigated. CPE rubber which has excellent properties such as cold resistance and chemical corrosion resistance, and is inexpensive in price than existing ethyleneacrylate rubber(EAR) was used to prepare a rubber compound useful for hose. A non-halogen flame retarding agent N,N'-bis- (diphenylphosphoro) diaminohexane(BDPDH), which is condensed phosphoric ester, was synthesized and it was mixed to CPE rubber material with the range of $0{\sim}30 phr$. From the test results, rheological properties, heat resistance, and flame retardance of CPE rubber compounds were found out to be much increased. The optimum content of BDPDH to rubber which gives maximum effect on thermal resistance and flame retardation, within the range of tolerable specification for rubber materials, was determined to be 20 phr.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.67-72
• /
• 2013

This study has been conducted to provide a management plan for recycled products (plastic wastes) by identifying hazardous substances present in it and conducting exposure assessment. The concentration of 7 heavy metals (Cd, Cr, Cu, Fe, Hg, Pb, Zn) was analyzed. Exposure scenario was assumed by the consumption of kimchi made in a recycled plastic bucket. According to the analysis, all of the analyzed samples were within the food code standard level except one sample (137.03 mg/kg, sum of Cd, $Cr^{6+}$, Pb and Hg). In leaching test, all of heavy metals were within the leaching standard (Standards specifications of utensil and container-Packing). In an oral exposure test, Fe, Pb and Zn were detected in cabbages and were below PMTDI (Provisional Maximum Tolerable Daily Intake). As one of the recycled plastic buckets exceeded the standard level, we conclude not to recommend the recycled plastic buckets for cooking purpose.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.124-132
• /
• 2008

Thermal and mechanical properties of flexible polyurethane foam modified by urushiol and cardanol which have been known to be antibiotic were investigated. It was observed from FT-IR spectra analysis that the urushiol reacted with isocyanate was participated in synthesis of polyurethane. It was also seen that the modification using urushiol and cardanol made the PU more thermally stable without deterioration of mechanical properties. The modified PU foams showed increased antibacterial properties compared with neat PU foam.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.210-219
• /
• 2014

In this study, the acrylic pressure sensitive adhesive (PSA) for the optical functionality sheet was prepared by blending liquid isoprene rubber. The acrylic PSA was synthesized with butyl acrylate, acrylic acid, 2-ethylhexyl acrylate and 2-hydroxyethyl methacrylate. Toluene was used to a solvent for polymerization. Liquid isoprene rubber (LIR-50) was blended with the acrylic PSA and blend ratio was 0 ~ 50 wt%. According to the results, the adhesive transfer, which was the big problem of acrylic adhesive, was reduced with the addition of LIR-50. The secondary bonding of LIR-50 with substrate did not occurred due to absence of polar group in LIR-50. The peel strength and adhesive transfer were decreased by UV curing and the degreed of decrease depended on the amounts of photoinitiator and UV irradiation time. On the other hand holding power increased drastically by increasing amounts of photoinitiator and UV irradiation time.

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.209-216
• /
• 2004

Two types of polyurethane-acrylate polymer were synthesized by reaction of 2-hydroxyethyl methacrylate(HEMA), acrylamide(AA), and polyurethane prepolymer. Water-soluble cationic polyurethane/acrylate retention aids were prepared by using polyurethane-acrylate, benzyl chloride and distilled water. The retention, drainage and strength properties of the retention aids were investigated. The retention of cationic polyurethane/acrylate type retention aids maintained around 70 % regardless of nm. COD value of white water was much reduced by adding the retention aids to it. Drainage property was also improved by addition of the retention aids. In addition, specific compression strength of the paper was improved a little by addition of the retention aids. PU-HEMA type showed better performance than PU-AA in terms of compression strength of the paper.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.196-196
• /
• 1994

DDS에 활용될 수 있는 고분자 소재를 개발할 목적으로 물성 및 응용성이 우수한 고분자 겔에 관한 연구를 수행하였다. Ethylene oxide,propylene oxide 각각의 copolymer인 poloxamer등의 prepolymer들을 triisocyanate로 가교시키고 diisocyanate 로 chain이 연장된 "soft hydrogel"을 제조하였다. 모델 약물을 선정하여 crosslinker와 extender의 조절에 따른 hydrogel의 약물 방출 조절능을 조사하였으며 그 기전을 규명하고자 하였다. 가교부위에 urethane bond를 함유한 soft hydtogel은 건조상태에서도 고무와 같은 전연성을 보여 일반적인 hydrogel과 대비되는 특성을 보였으며 이에 따른 다양한 활용성이 기대되었다. Extender및 crosslinker의 비율에 따라서 이 rubber elasticity가 조절되었다. 가교도가 감소할수록 팽윤도가 상승하였고 이에 따른 약물방출도 증가함을 확인하였다. 또한 Prepolymer의 분자량 및 친수/소수성등의 물성에 따라 약물방출을 조절할 수 있었다. 제조된 hydrogel에 조절방출시 필요한 기능을 부가시키고자 poly(carylic acid)류와 IPN 공중합체를 합성하여 물성을 조사하였고 비이온성/양이온성/음이온성 모델약물을 선정하여 pH에 따른 가변적 팽윤도와 이온성 상호작용등에 근거한 약물 조절방출기전을 조사하였다.기전을 조사하였다.

• Journal of Adhesion and Interface
• /
• v.19 no.1
• /
• pp.5-12
• /
• 2018

The purpose of this study is to evaluate the adhesive properties of polyurethane mixed aqueous dispersions by omitting the primer, dealing with the preparation of skins for synthetic leather with excellent adhesion by omitting the pre-treatment process. The two-component mixed polyurethane water dispersion was prepared by synthesizing an ester-based polyurethane resin (PU-T) and a carbonate-based polyurethane resin (PU-C) to obtain the final resin. As a result of measuring the peel strength of the adhesive specimens omitting the pre-treatment agent, it was confirmed that the state adhesive strength (ethylene vinyl acetate (middle): $4.2kg_f/cm$ and rubber (outsole): $4.4kg_f/cm$) there was. This makes it possible to omit the pre-treatment process which has been indispensably used in the shoe manufacturing process, thereby reducing the process time and reducing the amount of volatile organic compounds (VOCs) generated in the pre-treatment product, resulting in environmentally advantageous.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.249-257
• /
• 2005

Polyurethane(PU) prepolymers were prepared from polyol and diisocyanate. Unionized PU prepolymers were synthesized from poly(propylene glycol)(PPG, MW: 1000), 2,2-bis (hydroxymethyl) propionic acid(DMPA), and isophorone diisocyanate(IPDI) by prepolymer syhthesizing process. After PU prepolymers were dispersed into water, the physical properties were investigated by changing the molar ratio of polyol and diisocyanate. The results showed a stable state with the best physical properties when the prepolymer was composed of PPG/DMPA with hard segment=40%, NCO%=3.43%, [NCO]: [OH]=1.5: 1.0 in molar ratio, and was dispersed into water with 30% solid content. PU prepolymers also were synthesized with various molar ratio of PPG and DMPA. Upon higher molar ratio of DMPA, particle size of polyurethane dispersion(PUD) gradually decreased. PU-prepolymers prepared from the various blocking agents represented characteristic initial deblocking temperatures that depended on the blocking agents, and the beginning of deblocking occured within 30 mins on all the blocking agents used.