• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.725-734
• /
• 2014

Modernization projects are actively underway to replace conventional logistics equipment for the development of the 21st century logistics management system. The modernized logistics system is expected to expand to each troops on future. In this paper, we deal with simulation of automated logistics center to analyse the current system. Especially, the alternative to the same scale is designed based on needs of military distinctiveness. As a result, it can be effectively compared the current system. The result obtained in this design process is comprehensively analyzed by the AHP(Analytic Hierarchy Process). The proposed method in this study is allowed to cost-effectively evaluate current and future automated logistics center. And, that is expected to contribute to modernization projects of the military logistics system.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.109-120
• /
• 2004

Since the late of 1990, there have been number of studies on the required number of probe vehicles and/or optimal aggregation interval sizes for travel time estimation and forecasting. However, in general one to five minutes are used as aggregation intervals for the travel time estimation intervals for the travel time estimation and/or forecasting of loop detector system without a reasonable validation. The objective of this study is to deveop models for identifying optimal aggregation interval sizes of loop detector data for travel time estimation and prediction. This study developed Cross Valiated Mean Square Error (CVMSE) model for the link and route travel time forecasting, The developed models were applied to the loop detector data of Kyeongbu expressway. It was found that the optimal aggregation sizes for the travel time estimation and forecasting are three to five minutes and ten to twenty minutes, respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.100-107
• /
• 2020

In this paper, a study was conducted on the method of establishing the master plan standard for rational decision-making about utility tunnel construction in the existing urban. In the previous study, the optimal route was selected by the feasibility assessment. However, in order to increase the objectivity of the installation conditions of the utility tunnel in the master plan standard, comprehensive evaluation of the results by feasibility and economics analysis calculates the overall ranking for all sections analyzed. In addition, based on the results of the comprehensive evaluation, a method for establishing a mid·long term investment plan was introduced after reviewing the project to be conducted in the region. Additionally, in order to review the establishment of the standard suggested in the paper, an analysis was conducted by applying the master plan procedure to the northwestern urban zone of seoul.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.62-69
• /
• 2016

This paper proposes to select Measure of Performance(MOP) for object attainment in the counterfire operation and deduce the reasonable combination of blue force's hitting resources satisfying MOP's optimal value and regression equation for the object achievement time. Also, in the study-methodological perspective, a series of procedures for drawing the regression equation from the real world is presented. Firstly the model was made by simplifying the weapon-system information of red force and blue force, then the time for object attainment was derived from its simulation. Simulating the model for the counterfire operation was divided into three phases-detection, decision and hitting. The probability method by applying the random numbers were used for detection, fixed constant numbers for decision and hitting. The simulation was repeatedly performed to get the minimum time for the object attainment against the fixed enemy, and it was estimated as the optimal value of simulation. From this result, the optimum combination of blue force's weapon system against the red force and finally, the regression equation were obtained by using the response surface analyzing method in MINITAB. Thereafter this equation was completely verified by using 'the 2-sample t-test.' As a result, the regression equation is suitable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.573-573
• /
• 2016

우리나라의 하천 및 호소에 유입되는 오염물질 중 약 30% 이상이 농업(경종 축산)활동 등에 의한 비점오염원이며 특히, 축산비점오염원에 대한 관리는 관련 분야의 특징에 대한 정확한 이해를 바탕으로 국내 실정에 적합하고 현실적인 정책과 제도를 개발하여 적용하는 것이 필요하다. 실질적인 정책과 제도의 개선안 수립 적용을 위해서는 축산비점오염물질 배출에 대한 신뢰성 있는 정량화가 선행되어야 하나, 모니터링 자료가 충분하지 못하여 실측자료에 근거한 부하량 평가가 어렵고, 토지이용, 강우강도, 경사도 등에 따른 비점오염물질과 수계 유입되는 유달부하량 정량화에 대한 연구사례는 적은편이다. 따라서 국내 실정에 적합하고, 현실적으로 적용 가능한 정책 및 제도 개선안 마련을 위해서는 합리적인 오염 배출량 자료와 저감방법에 근거하여 현실적인 대안을 도출하는 연구가 필요하다. 또한 이러한 실정을 파악하기 위해서는 국내 축산 밀집지역을 대상으로 하여 강우시와 비강우시 오염물질들의 유출 특성 및 배출농도에 대한 기초자료가 필요하며 이를 토대로한 특성파악이 가장 우선시 되어야 할 것이다. 따라서 본 연구에서는 축산밀집지역인 정읍시 덕천면의 덕천천 유역일대를 대상으로 하여 강우시는 년 5회 비강우시는 년10회 모니터링을 통해 기초데이터를 구축하였으며 유역특성을 고려하여 총 8개 지점을 선정하여 조사하였다. 모니터링 결과 비강우시의 수질농도 평균값을 살펴보면, BOD, T-N, T-P 의 경우 모두 상류지점에서 하류로 가면서 점점 감소하는 경향을 보였다. 특히 축사 밀집지역인 상류지역서 가장 높은 농도를 나타냈다. 강우시의 경우 하류부분에서 가장 높은 값을 보였으며 가축자원화시설이 위치한 지점부터 높아진 후 하류로 갈수록 점점 농도가 증가된다. T-N의 경우 축사와 농경지가 밀집되어 있는 포함하는 지점에서 높은 값을 기록하였으며, 유량이 많아지는 하류지점에서 가장 낮은 값을 나타내었다. T-P의 경우도 BOD와 마찬가지로 하류지점에서 가장 높은 값을 나타냈다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.98-98
• /
• 2018

최근 기후변화로 인해 대류성 집중호우가 빈번하게 발생하고 있으며 이러한 강우 특성은 산지 지역에 위치한 소하천유역에 상당한 피해를 야기한다. 통상 대류성 집중호우는 규모가 작고 속도가 빠르기 때문에 중규모 이상의 유역에서 부분적으로 상이한 강우특성을 보인다. 아울러 이러한 호우 패턴의 변화는 일시적인 현상이 아닌 하나의 기상 특성으로 자리를 잡아가고 있기 때문에 이에 대한 대책마련이 더욱 필요한 실정이다. 초단기예보 모형은 돌발홍수 예경보시스템의 입력 값인 예측강우 자료를 생산한다. 시스템에 입력되는 예측강우 자료는 두 가지의 문제점을 가지게 된다. 첫 번째는 예측강우 자료 자체가 가지는 정확도의 문제이다. 이를 해결하기 위해 우리나라에서는 G/R비 개념을 도입하여 예측강우의 품질을 개선하고 있다. 두 번째 문제는 호우사상의 크기에 대한 것이다. 현재 돌발홍수 예경보시스템의 예측강우 보정기법은 호우의 거동 특성을 고려하지 않으며, 이로 인해 예측강우의 편의보정계수인 G/R비가 적절하지 않게 결정되는 문제가 발생한다. 본 연구에서는 이러한 문제점을 극복하기 위해 현재의 예측강우 보정기법과는 달리 호우의 이동경로를 고려하여 G/R비를 결정하고 이를 예측강우에 적용하는 방법을 제시하였다. 현재 호우가 위치하는 지역에 대해 G/R비를 산정하고 몇 시간 내에 대상지역에 도달하게 될 호우에 대한 예측 강우에 적용하였다. 본 연구에서는 2016년에 발생한 주요 호우사상을 선정하고, 우리나라 전역에 걸쳐 개선된 보정기법 방법론을 적용하였다. 그 결과 현재의 보정방법을 적용하는 경우 비정상적으로 과대하게 보정된 결과를 주는 데 반해, 호우의 이동경로를 고려한 보정방법을 적용한 경우에서는 실제 관측된 강우와 매우 유사한 합리적인 보정치를 제공해 주는 것으로 확인되었다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.1
• /
• pp.37-45
• /
• 2009

Susceptibility assessment of groundwater contamination is a useful tool for many aspects of regional and local groundwater resources planning and management. It can be used to direct regulatory, monitoring, educational, and policy-making efforts to highly vulnerable areas. In this study, a semi process-based was proposed to evaluate relative susceptibilities to groundwater contamination by nitrate on a regional scale. Numerical simulation based on data from each soil series was done to model water flow within soil profiles that were related to groundwater contamination by nitrate. Relative vulnerability indices for each soil series were produced by manipulation of amount of leaching flux, amount of average water storage in a soil profile, and amount of average water storage change. These indices were designed to convey the trend of leaching flux and to maximize spatial resolution. The resulting vulnerability distribution map was used to locate highly vulnerable sites easily with an appropriate grouping the indices, and was then compared with those from groundwater nitrate concentrations monitored. An excellent agreement was obtained across nitrate concentrations from the highly vulnerable regions and those from the low to stable regions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.218-225
• /
• 2021

The purpose of this study is to present a rational analytical method for predicting the behavioral characteristics from crack occurrence to fracture for a one-way CFRP grid reinforced concrete slab specimen. A total of four specimens were selected by Zhang et al.(2004) as the main experimental variables for CFRP grid amount, material properties and loading method. Analysis was performed through the Nonlinear Finite Element analysis program(RCAHEST), which applied the newly modified constitutive relational equations by the author. The mean and coefficient of variation for maximum moment from the experiment and analysis results was predicted 1.38 and 7 %. The mean and coefficient of variation for displacement corresponding maximum moment from the experiment and analysis results was predicted 1.41and 9.8 %. The prediction results for the behavioral characteristics from crack occurrence to fracture were verified and evaluated. It is judged that additional research is needed to secure various experimental results and to develop a more reliable analytical method.

• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.9-18
• /
• 2018

This paper proposes new algorithms of accessibility indices to analyze the connectivity of the Korean highway network. First of all, we find a transportation network that presents Korea's highway network in graphs in 2011 and 2017. And we analyze and compare the nation's highway network in 2011 and 2017 using concepts such as associated number, the relative distance, the accessibility, the degree of connectivity, the index of dispersion, the diameter of graph theory. To do this, an algorithm is presented which can easily obtain various accessibility indices from a given transportation network. Using the simulation results of this study, we can find city that is the center of traffic in the highway transportation network. In addition, cities that are included in the network but are relatively underdeveloped can be found and used as basic data for enhancing the connectivity of the nationwide traffic in the future. Moreover, the proposed algorithms of accessibility indices, which are modeled on highway transport networks, can help identify the accessibility space structure of each city and provide criteria for efficient and reasonable selection of alternatives in various regional planning processes, including transportation.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.225-231
• /
• 2019

In Korea, the minimum separation distance between aboveground high-pressure natural gas pipeline and buildings is regulated by Korea gas safety (KGS) code. In this paper, The technical backgrounds for the revision of the KGS code related to the minimum separation distance was presented. A consequence-based approach was adopted to determine the minimum separation distance by a reasonable accident scenario, which was a jet fire caused by the rupture of one inch branch line attached the gas pipeline. Where, the higher thermal radiation flux threshold was selected for workers in industrial area than for people in non-industrial area, because the workers in industrial area were able to escape in a shorter time than the people in public. As result of consequence analysis for the accident scenario, we suggested the KGS code revision that the minimum separation distances between high-pressure natural gas pipeline installed above ground and buildings should be 30 meter in non-industrial area and 15 meter in industrial area. The revised code was accepted by the committee of the KGS code and now in effect.