• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.611-620
• /
• 2021

The maintenance industry is mainly progressing based on condition-based maintenance after corrective maintenance and preventive maintenance. In condition-based maintenance, maintenance is performed at the optimum time based on the condition of equipment. In order to find the optimal maintenance point, it is important to accurately understand the condition of the equipment, especially the remaining useful life. Thus, using simulation data (C-MAPSS), a prediction model is proposed to predict the remaining useful life of a turbofan engine. For the modeling process, a C-MAPSS dataset was preprocessed, transformed, and predicted. Data pre-processing was performed through piecewise RUL, moving average filters, and standardization. The remaining useful life was predicted using principal component analysis and the k-NN method. In order to derive the optimal performance, the number of principal components and the number of neighbor data for the k-NN method were determined through 5-fold cross validation. The validity of the prediction results was analyzed through a scoring function while considering the usefulness of prior prediction and the incompatibility of post prediction. In addition, the usefulness of the RUL prediction model was proven through comparison with the prediction performance of other neural network-based algorithms.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.2
• /
• pp.163-171
• /
• 1997

Function approximation from a set of input-output pairs has numerous applications in scientific and engineering areas. Multilayer feedforward neural networks have been proposed as a good approximator of nonlinear function. The back propagation(BP) algorithm allows multilayer feedforward neural networks to learn input-output mappings from training samples. It iteratively adjusts the network parameters(weights) to minimize the sum of squared approximation errors using a gradient descent technique. However, the mapping acquired through the BP algorithm may be corrupt when errorneous training data we employed. When errorneous traning data are employed, the learned mapping can oscillate badly between data points. In this paper we propose a robust BP learning algorithm that is resistant to the errorneous data and is capable of rejecting gross errors during the approximation process, that is stable under small noise perturbation and robust against gross errors.

• Journal of the Korean Geographical Society
• /
• v.44 no.1
• /
• pp.1-16
• /
• 2009

This study aims to classify climate zones using Empirical Orthogonal Function and clustering analyses considering both air temperature and rainfall features in South Korea. When examining climatic characteristics of air temperature and rainfall by seasons, the distribution of air temperature is affected by topography and latitude for all seasons in South Korea. The distribution of rainfall demonstrated that the Yeongdong area, the southern coastal area and Jeju island have higher rainfall while the central area in Gyeongsangbuk-do is the least rainfall area. Clustering analyses of average linkage method and Ward's method was carried out using input variables derived from principal component scores calculated through Empirical Orthogonal Function analysis for air temperature and rainfall. Ward's method showed the best result of classification of climate zones. It was well reflected effects of topography, latitude, sea, the movement of surface pressure systems, and an administrative district.

• The Korean Journal of Applied Statistics
• /
• v.35 no.2
• /
• pp.189-201
• /
• 2022

In this study, we propose factor augmentation to improve forecasting power of cryptocurrency return. We consider financial and economic variables as well as psychological aspect for possible factors. To be more specific, financial and economic factors are obtained by applying principal factor analysis. Psychological factor is summarized by news sentiment analysis. We also visualize such factors through impulse response analysis. In the modeling perspective, we consider ARIMAX as the classical model, and random forest and deep learning to accommodate nonlinear features. As a result, we show that factor augmentation reduces prediction error and the GRU performed the best amongst all models considered.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.721-733
• /
• 2009

A pattern of tropical cyclone (TC) movement in the western North Pacific area was studied using the empirical orthogonal function (EOF) and the best track data from 1951 to 2007. The independent variable used in this study was defined as the frequency of tropical cyclone passage in 5 by 5 degree grid. The $1^{st}$, $2^{nd}$ and $3^{rd}$ modes were the east-west, north-south and diagonal variation patterns. Based on the time series of each component, the signs of first and second mode changed in 1997 and 1991, respectively, which seems to be related to the fact that the passage frequency was higher in the South China Sea for 20 years before 1990s, and recent 20 years in the East Asian area. When the eigen vectors were negative values in the first and second modes and TC moves into the western North Pacific, TC was formed mainly at the east side relatively compared to the case of the positive eigen vectors. The first mode seems to relate to the pressure pattern at the south of Lake Baikal, the second mode the variation pattern around $30^{\circ}N$, and the third mode the pressure pattern around Japan. The first mode was also closely related to the ENSO and negatively related to the $Ni\tilde{n}o$-3.4 index in the correlation analysis with SST anomalies.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.58-73
• /
• 2014

In general, it is thought discoloration on wood is frequently found in decorative wood products. So this study was conducted focusing on white rot found lower parts of columns and baseboards of a wooden house, Hyunchungsa (shrine) to know whether microorganisms have any influence on discoloration or there is correlation with strength by investigating resistograph, occurrence of microorganisms and microscopy for analysis(SEM, tissue analysis etc.). The results obtained were as follows: (1) The result of measurement of resistograph showed there are little correlation between discoloration and strength though there was a spot indicating low resistance. (2) The moisture content of discolored part was relatively higher than that of normal parts, but occurrence of microorganisms was less in discolored parts while more kinds of microorganisms were identified in normal parts with high CFU(Colony Forming Unit). (3) The result of SEM (with a magnification of 500 times) on the surface of discolored parts, it was found out there are many kinds of particles in different sizes on the surface and those were composed of elements such as C, O, Si, Ca, and a small amount of Na and Cl (weight %) were detected in part. (4) The result of tissue analysis showed discoloration occurs limitedly to the outer surface of column. As these results, it is concluded that discoloration has nothing to do with strength, damage by microorganisms and salt.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.225-231
• /
• 2013

In this study, we propose the design of optimized pRBFNNs-based night vision face recognition system using PCA algorithm. It is difficalt to obtain images using CCD camera due to low brightness under surround condition without lighting. The quality of the images distorted by low illuminance is improved by using night vision camera and histogram equalization. Ada-Boost algorithm also is used for the detection of face image between face and non-face image area. The dimension of the obtained image data is reduced to low dimension using PCA method. Also we introduce the pRBFNNs as recognition module. The proposed pRBFNNs consists of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned by using Fuzzy C-Means clustering. In the conclusion part of rules, the connection weights of pRBFNNs is represented as three kinds of polynomials such as linear, quadratic, and modified quadratic. The essential design parameters of the networks are optimized by means of Differential Evolution.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.171-180
• /
• 2013

Generally, when we apply zernike moments value for matching, we can use those moments value obtained from projecting image information under circumscribed circle to zernike basis function. However, the problem is that the power of discrimination can be reduced because hand images include lots of overlapped information due to its special characteristic. On the other hand, when distinguishing hand poses, information in specific area of image information except for overlapped information can increase the power of discrimination. In this paper, in order to solve problems like those, we design R3 ring mask by combining image obtained from R2 ring mask, which can weight information of the power of discrimination and image obtained from R1 ring mask, which eliminate the overlapped information. The moments which are obtained by R3 ring mask decrease operational time by reducing dimension through principle component analysis. In order to confirm the superiority of the suggested method, we conducted some experiments by comparing our method to other method using seven different hand poses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.1007-1016
• /
• 2005

This paper presents a feature extraction method for shape based retrieval of 3D models. Since the feature descriptor of 3D model should be invariant to translation, rotation and scaling, it is necessary to preprocess the 3D models to represent them in a canonical coordinate system. We use the PCA(Principal Component Analysis) method to preprocess the 3D models. Also, we apply that to make a MBR(Minimum Boundary Rectangle) and a circumsphere. The proposed algorithm is as follows. We generate a circumsphere around 3D models, where radius equals 1(r=1) and locate each model in the center of the circumsphere. We produce the concentric spheres with a different radius($r_i=i/n,\;i=1,2,{\ldots},n$). After looking for meshes intersected with the concentric spheres, we compute the curvature of the meshes. We use these curvatures as the model descriptor. Experimental results numerically show the performance improvement of proposed algorithm from min. 0.1 to max. 0.6 in comparison with conventional methods by ANMRR, although our method uses .relatively small bins. This paper uses $R{^*}-tree$ as the indexing.

• The Korean Journal of Applied Statistics
• /
• v.37 no.1
• /
• pp.73-86
• /
• 2024

A radial chart of Excel is very useful graphical method in delivering information for numerical data. However, it is not easy to discriminate or classify many individuals. In this case, after shaping each individual of a radial chart, we need to apply shape analysis. For a radial chart, since landmarks for shaping are formed as many as the number of variables representing the characteristics of the object, we consider a shape that connects them to a line. If the shape becomes complicated due to the large number of variables, it is difficult to easily grasp even if visualized using a radial chart. Principal component analysis (PCA) is performed on variables to create a visually effective shape. The classification table and classification rate are checked by applying the techniques of traditional discriminant analysis, support vector machine (SVM), and artificial neural network (ANN), before and after principal component analysis. In addition, the difference in discrimination between the two coordinates of generalized procrustes analysis (GPA) coordinates and Bookstein coordinates is compared. Bookstein coordinates are obtained by converting the position, rotation, and scale of the shape around the base landmarks, and show higher rate than GPA coordinates for the classification rate.