• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.1-7
• /
• 1999

This study was performed to investigate the contents of the heavy metals such as cadmium(Cd), copper(Cu), iron(Fe), lead(Pb) and zinc(Zn) in meat and meat products. For this experiment, each 20 samples of beef and pork were collected at slaughterhouse in Seoul areas and 45 samples of meat products(ham, sausage, processed meat and seasoned meat) were purchased from commercial food markets. The contents of the heavy metals was determined by atomic absorption spectrophotometry from Jan. to Nov. In 1998. The results obtained were summarized as follows ; 1. In Korean native beef, mean values of the heavy metals(mg/kg) were Pb : 0.14$\pm$0.10, Cd : 0.07$\pm$0.02, Cu : 1.73$\pm$0.95, Zn : 42.82$\pm$8.17 and Fe : 67.43$\pm$24.18, respectively. 2. In imported beef, mean values of the heavy metals(mg/kg) were Pb : 0.03$\pm$0.08, Cd : 0.06$\pm$0.02, Cu : 1.41$\pm$0.62, Zn : 42.93$\pm$4.95 and Fe : 40.06$\pm$12.77, respectively. 3. In pork, mean values of the heavy metals(mg/kg) were Pb : not detected, Cd : 0.09$\pm$0.02, Cu : 1.08$\pm$0.23, Zn : 19.49$\pm$6.02 and Fe : 30.21$\pm$10.51, respectively. 4. In ham, mean values of the heavy metals(mg/kg) were Pb : trace, Cd : trace, Cu . 1.19$\pm$0.46, Zn : 13.58$\pm$4.99 and Fe : 31.43$\pm$11.74, respectively. 5. In sausage, mean values of the heavy metals(mg/kg) were Pb : 0.15$\pm$0.34, Cd : 0.08$\pm$0.05, Cu : 1.15$\pm$0.46, Zn : 13.70$\pm$7.13 and Fe . 27.28$\pm$15.05, respectively. 6. In processed meat, mean values of the heavy metals(mg/kg) were Pb : 0.08$\pm$0.13, Cd : 0.09$\pm$0.04, Cu : 1.28$\pm$0.60, Zn : 14.72$\pm$7.09 and Fe : 24.04$\pm$10.33, respectively. 7 In seasoned meat, mean values of the heavy metals(mg/kg) were Pb : 1.05$\pm$2.21, Cd : 0.13$\pm$0.03, Cu : 1.06$\pm$0.16, Zn : 17.53$\pm$8.72 and Fe : 26.76$\pm$9.02, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.303-309
• /
• 1989

Present study was conducted to reveal the effects of the herbicides, Lasso and Devrinol, on the soybean growth and the nodulation in field condition. Emergence rate was reduced positively in proportion to increase in the concentration of herbicides regardless of the herbicidal difference and it was significantly reduced even in the recommended concentration as compared to untreated plot, showing marked abnormal symptom on seedlings. Plant height, fresh weight of the plant, number of internodes, branches, pods, seeds per plant and 100-seed weight were reduced with increase in the concentration of herbicides and were highly significant in difference between the untreated plot and double concentration plot, eventhough most were nonsignificant in difference from the recommended concentration. Nodulation was significantly decreased with increase in the concentration of herbicides. The reduction was remarkably different with soybean varieties and consistently appeared from three weeks to six weeks after sawing. Significant correlation was realized between the reduction of nodulation and the agronomic characters of soybean and it was considered that the reduction of nodulation by misapplication of the herbicides might be a causal factor for decrease in soybean yield.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.259-271
• /
• 2013

The purpose of this study was to make the stress distribution produced by simulated different load under two types of internal connection implant system (stepped and tapered type) by means of 3D finite element analysis, The finite element model was designed with the parallel placement of the one fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st molar. Two models were loaded with 200 N magnitude in the vertical direction on the central position of the crown, the 1.5 mm and 3 mm buccal offset point from the central position of the fixture. The oblique load was applied at the angle of $30^{\circ}$ on the crown surface. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual dimension. The results were as follows; 1. The loading conditions of two internal connection implant systems (stepped and tapered type) were the main factor affecting the equivalent bone strain, followed by the type of internal connections. 2. The stepped model had more mechanical stability with the reduced max. stress compared to $11^{\circ}$ tapered models under the distributed oblique loading. 3. The more the contact of implant-abutment interface to the inner wall of implant fixture, the less stress concentration was reduced.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.236-242
• /
• 2015

We present two data-driven modeling methods, partial least square (PLS) and artificial neural network (ANN), to predict the major operating and performance variables of a polymer electrolyte membrane (PEM) fuel cell stack. PLS and ANN models were constructed using the experimental data obtained from the testing of a 30 kW-class PEM fuel cell stack, and then were compared with each other in terms of their prediction and computational performances. To reduce the complexity of the models, we combined a variables importance on PLS projection (VIP) as a variable selection method into the modeling procedure in which the predictor variables are selected from a set of input operation variables. The modeling results showed that the ANN models outperformed the PLS models in predicting the average cell voltage and cathode outlet temperature of the fuel cell stack. However, the PLS models also offered satisfactory prediction performances although they can only capture linear correlations between the predictor and output variables. Depending on the degree of modeling accuracy and speed, both ANN and PLS models can be employed for performance predictions, offline and online optimizations, controls, and fault diagnoses in the field of PEM fuel cell designs and operations.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.40-47
• /
• 2017

Dust explosion hazards are always present when combustible dusts are manufactured or handled in the process. However, industries is experiencing difficulty in establishing chemical accident prevention measures because of insufficiency of information on dust explosion characteristics of combustible dust handled in industry. In this study, we investigated experimentally dust explosion characteristics of two kinds of multi-walled carbon nano tubes (MWCNT) different in particle size distribution and examined classification of dust explosion hazardous area for MWCNT manufacturing or handling process by applying the NFPA 499 code. As a result, $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 1 having $124.2{\mu}m$ median diameter are obtained 6.3 bar, $56bar{\cdot}m/s$, $125g/m^3$, over 1000 mJ, and over $650^{\circ}C$. $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 2 having $293.5{\mu}m$ median diameter are 6.2 bar, $42bar{\cdot}m/s$, $100g/m^3$, over 1000 mJ, and over $650^{\circ}C$, respectively. MWCNT 1, 2 are not categorized as combustible dust listed in the NFPA 499 Code for classification of dust explosion hazardous area because explosion severity and ignition sensitivity of MWCNT 1, 2 are below 0.35 and 0.01, respectively.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.886-893
• /
• 2001

We synthesized $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ powders by coprecipitation, citration and solid-state reactions. The oxygen permeation membranes were fabricated by cold isostatic pressing of the synthesized powders, followed by sintering in air. All powders and membranes consist of perovskite phases. The coprecipitated powders showed the highest surface area ($7.5m^2/g$) but strontium deficiency was found during washing and filtering in the process. The membrane with lower relative density was fabricated by citration method. On the other hand, solid state reacted powders had high relative density (95%), and mechanical properties showed superior properties. Especially, the composition of the solid-state reacted powders was relatively well-controlled.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.105-121
• /
• 2011

The operation of tidal power facility may induce severe changes of water quality in Shihwa Lake. Current water quality data are quite important to water quality management policy of Shihwa Lake. Thus, the water quality data of Shihwa Lake and its adjacent sea in 2010 were presented to characterize the temporal and spatial changes of water parameters such as pH, SS, DO, COD, dissolved nutrients, chlorophyll-a, TN and TP. Highest levels of water quality parameters were observed near the Shihwa and Banweol industrial complexes and the levels of water quality parameters were on a decreasing trend to those near the water gate. It suggests that the horizontal distributions of water quality levels are mainly controlled by the supply of fresh water from streams and the inflow of outer seawater by operation of water gate. Although the higher concentrations of TN and TP were observed in the location being affected by Sorae port, the levels of water quality parameters in outer sea of Shihwa Lake were lower than those in Lake. In summer season, hypoxic condition was well developed in bottom water by strong stratification and active decomposition of organic matter. Thus, the vertical distributions of dissolved nutrient, TN and TP concentrations showed the concentrations to be higher in bottom seawater than those in surface seawater whereas the vertical distributions of chlorophyll-a, COD and POC concentrations showed the concentrations to be higher in surface seawater than those in bottom water. Results of Pearson's correlation matrix for surface seawater demonstrated that salinity showed negatively good correlation with not only dissolved nutrients except for ammonium but chlorophyll-a, COD and POC This result indicates that the supply of dissolved nutrients through several streams might significantly affect phytoplankton bloom and increase of COD concentration in surface seawater.

• Korea journal of population studies
• /
• v.21 no.2
• /
• pp.144-181
• /
• 1998

The main purpose of this study is to understand the socio-cultural adaptation and life-styles of the Chinese and Korean immigrants in Vancouver, Canada. Of interest are the immigration policies of the Canadian government and formation of the Chinese and Korean minority societies in Vancouver. Attention is given to estimating the size of the Korean population in Vancouver, utilizing the listings of telephone directory and the proportion of surname Kims in the Korean population. This paper focuses on explaining the distinctive adaptation patterns and socio-cultural characteristics of the Chinese and Korean immigrants. A conceptual scheme of socio-cultual adaptation of the minority immigrants, which is hypothesized as a function of the participation to the host society and the cultural identity, is also developed in this paper. Findings of the analysis suggest that the Chinese and Korean population in Vancouver witnessed a rapid growth since the mid 1980s, when the Canadian government launched the immigration programs for investors and entrepreneurs. It appears that the Chinese and Korean immigrants hold strong ethnic identity and maintain cultural traditions and life-styles of their own. While Chinese immigrants are characterized by active participation to the host society, Korean immigrants tend to confine themselves to the Korean enclave, and thus keep a certain distance from the host society. This appears to be particularly true for the Koreans who immigrated with a status of investor or entrepreneur. As the key force behind the ethnic differences in their adaptation, the role of voluntary associations is stressed. Finally, the future prospects of the Chinese and Korean societies and their acculturation are discussed in this study.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.853-861
• /
• 2014

Cookies, muffins and baguettes were formulated with Korean wheat flour and compared with those made from imported wheat flour in terms of total phenol content, antioxidant activity, and in vitro protein digestibility (IVPD). Chunnyencho and Honghawsi were added to improve quality of the bakery products. Addition of Chunnyencho did not show any significant improvement, whereas Honghawsi increased total phenol content of cookies. Total phenol content in 80% ethanol extract of muffins prepared with Korean wheat flour was 1.5 times higher than those made from imported wheat flour, whereas total phenol content was 1.2 times higher in the 80% methanol extract of baguettes prepared with imported wheat flour compared to those made with Korean wheat flour. Overall, total phenol content of Korean wheat flour was higher than that of imported wheat flour because total phenol content was higher in 80% ethanol extracts than in 80% methanol extracts. Antioxidant activity was not significantly different between ethyl acetate extracts of bakery products from imported wheat and Korean wheat, whereas antioxidant activity of 80% methanol extract of muffins with Korean wheat was 2.4 times higher than that from imported wheat. IVPD was not significantly different in any bakery products made from imported wheat or Korean wheat but was higher in baguettes than cookies or muffins. Conclusively, bakery products made from Korean wheat had higher total phenol content and antioxidant activity than imported wheat.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.81-86
• /
• 2005

One of the endoglucanases, F-I-III, was purified from the culture filtrate of T. sp. C-4 through procedures including chromatography on Sephacryl S-200, DEAE-Sepharose A-50, and Chromatofocusing on Mono-P (FPLC). The molecular weight of the enzyme was determined to be about 56,000 Da by SDS-PAGE, and pI of 4.9 by analytical isoelectric focusing. F-I-III showed the highest enzyme activity at $55^{\circ}C$, and the pH optimum of the enzyme was 5.0. There was no loss of activity when the enzyme was incubated at $50^{\circ}C$ for 24 hours. The specific activity of the enzyme F-I-III toward the CMC was 315.4 U/mg. The Km value for $PNPG_2$ of F-I-III was 2.69 mM. N-terminal sequence of F-I-III was analyzed to be QPGTSTPEVHPKKLTTYK. It showed $95\%$ of homology to that of EGI from T. reesei. The presence of some metal ions (1 mM) had only a little effect on CMCase activity. The treatment of the reducing agents resulted in the increase of endoglucanase activity.