• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1173-1180
• /
• 2013

The construction industry has been a major player in Korean economy growth and it has been accountable for more than 15% of GDP during the last decade. However, fast-growing construction industry has also produced some unpleasant side-effects. Environmental problems are identified one of the main issues in the Korean construction industry and they are closely related to minimizing the carbon emission and delivering environmental-friendly green products. The movement of green construction, now, is considered the next driving force for the industry which has significant impacts on the future. This research investigates this green construction while focusing on governmental policy implications such as green certificate for construction products. Green building has long been recognized as the leading green construction product and the green trends have expanded to infrastructure construction such as road construction. Therefore, this research concentrates on various green road certification processes in the United States in order to develop a framework for Korean green road certification. In doing so, some of the green roads application has also been analyzed. This research intends to provide background information for Korean green construction policies, especially on green road certification.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.733-737
• /
• 2008

Construction supply chain management focused on materials in construction industry plays a critical role which controls the success and failure of a project. For the efficiency of construction supply chain management, the framework which provides project participants with the information originated from whole construction logistics steps without the omission and discontinuation of information flow is required. The new management framework that can support this environment is necessary because of setting up the complicated and distributed environment including logistics information management by intelligent equipment, co-working management with pre-framework legacy system and various devices(UMPC and PDA etc.) as the information confirmation and electrical transmission tool between the project participants different from former construction supply chain management environment while recently developing ubiquitous technologies such as RFID/USN and intelligent equipment to support logistics process. Therefore, the objective of this study is to introduce the concept of SOA (Service Oriented Architecture) as an alternative of effective information integration under the complex and distributed environment and to propose the SOA-based application model for building intelligent construction supply chain management framework.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.300-309
• /
• 2016

Curved beams are increasingly used in buildings, vehicles, ships, and aircraft, which has resulted in considerable effort towards developing an accurate method for analyzing the dynamic behavior of such structures. The stability behavior of elastic curved beams has been the subject of many investigations. Solutions to the relevant differential equations have traditionally been obtained by the standard finite difference or finite element methods. However, these techniques require a great deal of computer time for a large number of discrete nodes with conditions of complex geometry and loading. One efficient procedure for the solution of partial differential equations is the differential quadrature method (DQM). This method has been applied to many cases to overcome the difficulties of complex algorithms and high storage requirements for complex geometry and loading conditions. Out-of-plane buckling of curved beams with rotatory inertia were analyzed using DQM under uniformly distributed radial loads. Critical loads were calculated for the member with various parameter ratios, boundary conditions, and opening angles. The results were compared with exact results from other methods for available cases. The DQM used only a limited number of grid points and shows very good agreement with the exact results (less than 0.3% error). New results according to diverse variation are also suggested, which show important roles in the buckling behavior of curved beams and can be used for comparisons with other numerical solutions or experimental test data.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.279-286
• /
• 2009

This study was carried out to utilize the waste heat from office building for turfgrass culture on a roof garden. Heating system had been installed in the middle of soil profile on the turf areas in the garden plots. The results showed that the installation of heating system increased the shoot density, turfgrass quality, coverage rate, and root length compared with the control plots. The surface temperature of heating plots reached at $10.9^{\circ}C$ when the control plot showed $0^{\circ}C$, however, the soil moisture content was decreased 1.9% by the heating system. When the height of the snow accumulation reached over a 15cm, the it took only 4 days to melt out completely, while the height did not changed those period at the control plots. When the water temperature in boiler increased to $60^{\circ}C$ from a proper temperature of $55^{\circ}C$ in turf growth, the desiccation from leaf tip was started to occur caused by drought stress. More detail research should be followed in stress physiology in turf management in roof garden operation.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.15-23
• /
• 2021

As the construction production system is reorganized as part of the construction industry innovation plan, direct construction is expanding. According to this trend, this study analyzed the impact and problems of the expansion of direct construction through the position of the construction industry and a study of foreign cases. In addition, by diagnosing the impact of the measures to expand direct construction from various aspects, countermeasures were suggested to suitably apply the direct construction mandatory system. Also, for each alternative, effects and problems were evaluated through interviews with experts in policy/administrative and architecture fields. The alternatives for expanding and improving the efficiency of the direct construction mandatory system derived from this study are four items: granting the discretion of the client, differentiation by scale of construction, utilization of construction guarantee system, and introduction of flexible working group leader system. As a result of the expert interview, all of them were evaluated to have a positive impact directly and indirectly on the expansion of direct construction. This study contributes literature to the application of the direct construction mandatory system by examining the current status of direct construction, and suggests a direction for expanding direct construction through deduction of alternatives for applying the direct construction mandatory system and expert evaluation.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.651-662
• /
• 2023

Recently, research on the use of Building Information Modeling(BIM) for various construction management activities is being actively conducted, and interest in 3D model-based estimation is increasing because it has the advantage of being able to be automatically performed using the attribute information of the 3D model. Therefore, this study aimed that the difference in the quantities is calculated the quantity based on the 2D drawing of a building and is extracted from the 3D model created by the Revit software was compared and tried to find out the cause. The difference in the quantity calculated by the two methods was the largest in the formwork, followed by the smallest in the order of the quantity of rebar and concrete. The reason for this difference is that there is a part where the quantity extraction in the 3D model is not suitable for the quantity calculation standard, and in particular, in the case of formwork, it was difficult to separate only the quantity of the necessary part. In addition, since the quantity of rebar was not separated by member, it was impossible to accurately compare the quantity and identify the cause of the difference. Therefore, it is considered to be the most reasonable to use application software that imports only the numerical information necessary for quantity calculation from the 3D model and applies a separate calculation formula.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.131-146
• /
• 2004

The Purpose of this study is to suggest strategies for environmental education through the Practical Arts(TechnologyㆍHome economics) Subject in a viewpoint of the clothing & textiles resources to resolve problems in the clothing life area. For this, this study was carried out through review of literature which is related with the consumption, the environmental problems, the environmental policies, and regulations of the government and new environmental technologies, of clothing & textiles industries and environmental education. The major findings of the study were as follows; 1) The environmental education system model in a viewpoint of the Clothing & Textiles resources was developed. This model system is consisted with interactions on school, government, industry, home and non-government organizations. Thus, the fact that Practical Arts(TechnologyㆍHome economics) Subject were the most effective subject to teaching the environmental education viewpoint of the Clothing & Textiles resources was confirmed. 2) The standards were analysed out to analyse the contents in the clothing area of the Practical Arts(TechnologyㆍHome economics) Subject. It were consist of 4 factors and 12 elements under the factors: Awareness of clothing & textile resources(clothing consumption, production of clothing & textile and environmental problems). Planning and buying of clothing(planning, buying), Management of clothing(understand of textile. human body & environment, laundering and Environmental pollution, arrangement & conservation) Recycling & exhaust of clothing(contribution, redesign, recycling, exhaust) 3) Analysing the current Practical Arts (TechnologyㆍHome economics) subject from the Environmental education in the clothing section, the environmental education related with clothing were taught the most in the middle school course, and environmental contents were concentrated in the recycling factors. but not so much on other factors. 4) After analysing the Practical Arts (TechnologyㆍHome economics) subject, the strategies were suggested for reinforcing the environmental education in the clothing of the Practical Arts(TechnologyㆍHome economics) subject.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.1
• /
• pp.43-54
• /
• 1989

In recent years plants have increasingly become in inferior part of the interior designing of large buildings. In 28 large buildings selected at random in Seoul City have been subjected to studies on utilization status of fille interior landscape plants. The results obtained were as follows. 1. Plant class found in Interior of large buildings were 59 class, especially Dracaena were the most predominent plants among them, and then comes Monstera, Phiodendron, Schefflera, and Washingtonia in that order. 2. The most abundant ornamental plant cultivars were Monstera adansoii(Monstera perutusa cv.), and then comes Schefflera arboricora(Schefflera Hong Kong cv.), Washingionia rubusta (Washingtonia palm). Rhapis excelsa, and Diffenbachia(Hawaii Snow cv.) in that order. 3. Foliage plants among the interior landscape plants showed 99.5 percent and Woody plants and Bonsai plants showed each 0.4, 0.1 percent. 4. Climbing foliage plants found in 28 large building observed For the present study were 9 cultivar, and the most abundant plants were Hedera (pittsburgh cv.) and Epipremnum (Marble Queen cv.) pl anted to clustered planting. 5. A majority of plants used to plastic pot, and most of 71an1s place on the floor. 6. Height of plants ranging less then 50cm were more frequently found, but ranging from 50cm to 2.0m were 4.3 percent and the most predominent height of plants were Canariensis showed 4m in the large buildings. 7. Interior light intensity in large building were shortage, therefore artificial lamp for formal growing needed to be equipped. 8. Purpose growth of interior plants were to in order visitors. 9. 7he superintendents prefered to used pot-stand. 10. The most important environment factor for plant growing were light, humidity, and water.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.30.1-30.1
• /
• 2018

일제 강점기를 지난 후 광복을 맞았지만, 전란의 폐허 속에 개설된 대학의 천문학과의 관측 시설들은 전문한 상태였다. 필자가 학부 재학 중이던 6-70년대까지도 시 시공(時空)의 흐름은 필요한 것을 직접 만들어 사용할 수밖에 없는 시대로 몰아가고 있었다. 당시를 회고 하며 지금까지 걸어 온 "천문기기 제작 연구의 삶"을 회고하고자 한다. 대학 재학 시절 교수님의 도움으로 막스토브 망원경을 제작하고, 40cm 카세그레인 망원경 등 광학계의 원리와 특성연구를 통해 부품 조립을 수행할 수 있었다. 태양 흑점관측을 위한 10cm 굴절 망원경의 투영시설을 고안하여 6개월 동안 관측하였지만. 석사 논문을 위해 광전측광 관측시스템을 제작하여 식쌍성 관측을 수행하였다. 그 결과 한국의 시설로 UBV 광도곡선 완성하여 1975년 가을 천문학회에서 발표하였다. 1976년 2월 국립천문대 천문계산연구실에 발령 받고 역서편찬 업무를 담당하면서 소백산 60cm 망원경 최종 설치를 끝내고, 천문대(현 역삼동 과총회관 빌딩) 옥상에 2m 규모의 목재 돔을 설계 제작하고 일반인들을 위한 대중천문 활동을 시작하였다. 재직 중에 항상 한국의 열악한 천문시설의 상황을 실감하고 20대를 마감하면서 퇴직하여 "한국천문기기 연구소"라는 명칭으로 천체 돔을 설계하고, 돔 제작기계를 개발하였다. 망원경만 보관 중인 국내 4개 대학에 돔을 납품 한 후 연세대학교 천문대의 직경 6m 스텐레스 돔을 제작하였다. 아울러 연세대 천문대 60cm망원경을 설치하면서 이 곳에 입사하여 관측 장비개발 연구와 관측에 전념하게 되었다. 재직 기간 중 대학의 배려로 카나다 국립천문대(DAO) 방문연구원으로 1.8m 망원경으로 식쌍성들의 분광관측을 수행하여 시선속도곡선을 완성하였고, 체류 중에 스텝들과 국내에서 사용할 60cm용 첨단 분광기를 설계하였으나 대학에 재원이 없어 제작을 못한 아쉬움이 남는다. 1989년 2월 충북대학교 천문우주학과에 부임하면서 열악한 상황이지만 교육과 연구 장비로 20cm와 35cm 소형 망원경의 디지털 광전측광시스템으로 간이 천문대를 설치하여 운영하였다. 학과 설립 10 주년(1998년)을 맞아 40cm 망원경과 6m 돔을 설치하여 교내천문대가 완공되었다. 2000년이 되면서 대중 천문활동 을 위해 이동 천문대를 제작하여 4륜 자동차에 견인하여 여러 지역을 찾아 관측과 강연 활동 등 학과의 대중천문 활동의 특성을 살리는 계기를 만들게 되었다. 학과 설립 20주년(2008년)을 맞으면서 충북 진천에 16개 자동분할 개폐식 스릿의 9m 돔 안에 1m 망원경을 원격관측 시설을 완비하여 대학 본부의 기관으로 충북대학교천문대를 개관하고 관측시설을 완비하였다. 우리의 전통적인 세종시대 천문시설은 당대 최대의 시설이지만 당시 유물들이 모두 소실되어 현존하는 것이 하나도 없음은 실로 아쉬움이 큰 것이었다. 누군가는 그 구조, 형태, 원리, 기능, 사용방법 등을 밝히고 복원을 시도해야 할 시급함이 있었다. 문헌을 통해 1991년부터 학부졸업 논문으로 "고천문 의기(儀器) 복원연구" 분야의 발표를 시작하였다. 그 결과를 통해 세종탄신일에 영릉에서 숭모제 행사 후 그 곳에서 수년간 세종시대 고천문의기 한가지씩 작동모델을 복원하여 제막식을 거행하였다, 유물복원 회사 (주)옛기술과 문화 와 함께 팀을 이루어 매년 제작할 종목을 준비하게 되었다. 간의(簡儀)를 복원한 후에는 일성정시의, 소간의, 앙부일구, 정남일구, 석각천문도, 혼천의, 혼상, 각종 해시계 등 매년 지속적으로 복원되어 큰 규모의 야외 전시장이 완성되었다. 작동모델 설계연구팀의 자문과 제작팀과의 팀웍으로 이룬 성과인 것이다. 한번 시작품이 발표된 모델들은 국내 과학관과 박물관, 천문관에서 후속 모델을 설치하였다. 한국천문연구원과 부산 동래읍성 내에 장영실 과학 동산은 간의와 혼상을 비롯한 각종 해시계들을 설치한 큰 규모의 야외 전시장이다. 조선의 명망 높은 유학자들이 인격적인 하늘을 살펴보았던 혼천의와 일만원권에 그려 있는 국보 230호 자명종 혼천시계(일만원권의 그림)의 작동 모델을 제작하였다. 이와 같은 연구 결과들은 석사과정 박사과정을 통하여 더 심층적인 연구들이 발표되었고, 각종 조선(한국)의 천문의기(天文儀器) 연구 자료들은 연구팀들을 통해 중국과 일본 등 해외에서도 발표되었다. 지금까지 복원된 유물들이 완성되기까지는 참여한 많은 연구원들과 제작팀들이 합심하여 각자의 역할을 수행하여 최종 작동모델들이 하나 둘 완성되는 것이었다. 이것은 참으로 보람된 일이었고, 은퇴 후 지금은 재능기부자로서 즐거운 삶을 이어 갈수 있게 되었다.