• Journal of the Korean Institute of Gas
• /
• v.8 no.4 s.25
• /
• pp.15-22
• /
• 2004

This study has been carried out to improve the conditions of process operation through the adjustment to the flow rate and outlet pressure of LNG HP pump, one of the main process facilities, in LNG receiving terminal. We have determined optimum flow rate and applied it to the field operation by analyzing the field operating performance for all the HP pumps and the load of natural gas supply in seasonal using the ASPEN PLUS. As a results, we have get the electric cost saving for the HP pump operation and derived contribution to safety operation by reduced the LNG Process pressure.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.62-67
• /
• 2021

Selective catalytic reduction(SCR) is an exhaust gas reduction device to remove nitro oxides (NOx). SCR operation of ship can be controlled through valves for minimizing economic loss from SCR. Valve in SCR-high pressure (HP) system is directly connected to engine exhaust and operates in high temperature and high pressure. Long-term thermal deformation induced by engine heat weakens the sealing of the valve, which can lead to unexpected failures during ship sailing. In order to prevent the unexpected failures due to long-term valve thermal deformation, a failure prediction system using autoregressive integrated moving average (ARIMA) was proposed. Based on the heating experiment, virtual data mimicking temperature range around the SCR-HP valve were produced. By detecting abnormal temperature rise and fall based on the short-term ARIMA prediction, an algorithm determines whether present temperature data is required for failure prediction. The signal processed by the data collection algorithm was interpolated for the failure prediction. By comparing mean average error (MAE) and root mean square error (RMSE), ARIMA model and suitable prediction instant were determined.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.382-389
• /
• 1995

This study intended to investigate the sedimentation rates of core sediments of the western part of the East Sea using Accelerator Mass Spectrometer (AMS) C-age on the planktonic foraminifera or acid-ex-tracted residue, base-soluble and base-extracted residue fractions. On the basis of the depth-age correlations, the sedimentation rates during the late Holocene period of Cores HP-10, HP-3, 94-9 and 92-3 were 30 cm/kyr, 10 cm/kyr, 11 cm/kyr and 112 cm/kyr, respectively. The sedimentation rates of the westem part of the East Sea, however, seems to be ranged from 11 cm/kyr to 30 cm/kyr, because the rates of the only two cores (Cores HP-10 and 94-9) which were dated at more than three depths are considered to be more reliable. The rates in each core sediment showed good linear relationship with the sample depth, suggesting that the sea-level rise had been finished nearly during the early Holocene period and the general depositional environments had been lasted rather constant during the late Holocene period.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.67-76
• /
• 2022

This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m^-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m^-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO₃-N) and lasted bellower than pH 5.5 for 15-67 DAT. It was found that ammonium nitrogen (NH₄-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m^-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.8-14
• /
• 1993

To investigate selection efficiency for protein content and hardness in a wheat breeding program, two crosses were made between soft wheat (SW) ‘Chokwang’ and hard wheat (HW) ‘Lancota’, and between HW ‘Suwon 210’ and SW ‘Atlas 66’. F2 progeny lines from the crosses were separated into 4 groups as HW + high protein (HP), HW + low protein (LP), SW + HP and SW + LP by measuring protein content and sedimentation value in F4 generation. The subsequent populations were tested for protein content, sedimentation value, mixogram pattern and bread quality. HP group selected from F4 again had a higher protein content in F5 generation than LP group, but there was no significant difference between two groups in F6 generation. In sedimentation value, the significant difference was recognizable only between the groups of HW + HP and. SW + LP. Plant based investigation in F6 revealed that the distribution pattern for protein content and sedimentation value shifted from the low to high by the four groups with the order of SW + LP, HW + LP, SW + HP, HW + HP. Such a trend was most noticeable in the progenies of the cross between ‘Suwon 210’ and ‘Atlas 66’. Mixogram pattern that shows flour characteristics differed greatly among the groups, indicating a high selection efficiency for the traits. Bread volume in F6 of HW + HP was found to be higher than that of SW + LP, only from the cross between ‘Suwon 210’ and ‘Atlas 66’.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5344-5351
• /
• 2013

Chambers in a continuous furnace were designed. A chamber consists of inlets and outlets of nitrogen gas which is used to discharge burned gas and heating pipes (HP) which are used to keep temperature of fired materials at $1,300^{\circ}C$. Design variables were numbers of inlets and outlets, distance between floor and lower HP ($h_1$), distance between lower HP and fired materials ($h_2$), distance between fired materials and upper HP ($h_3$), temperature of HP, numbers of HP and distance between HP. The numbers of inlets and outlets were determined so that nitrogen gas formed a laminar flow for efficient discharge. All other design variables were determined so that temperature of fired materials is as uniform as possible near $1,300^{\circ}C$. Chambers were produced and temperature was measured at 21 points using thermocouples. The largest deviation from $1,300^{\circ}C$ was less than ${\pm}2.2^{\circ}C$.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1026-1032
• /
• 2015

This study attempted to find an efficient method for the preparation of high-purity galactooligosaccharides (HP-GOS) using ${\beta}$-galactosidase and yeast fermentation. GOS prepared using Lactozym 3000L showed the greatest enhancement in total GOS of the six ${\beta}$-galatosidases tested. GOS alone achieved 51% conversion of initial lactose. GOS production was enhanced by fermentation with commercial yeast (Saccharomyces cerevisiae); its concentration reached 71% after 36h fermentation with 8% yeast. Component sugar analysis with HPLC indicated that HP-GOS fermented with S. cerevisiae showed significantly increased levels of 4'/6'-galactosyllactose and total GOS as well as a significantly decreased glucose level. HP-GOS facilitated the growth of Lactobacillus sp. (L. acidophilus and L. casei) and Bifidobacterium sp. (B. longum and B. bifidum). In sum, high-purity GOS has been successfully produced through both an enzymatic process and yeast fermentation. GOS encourages the growth of bacteria such as Lactobacillus and Bifidobacterium that may be beneficial to human gastrointestinal health.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.988-1000
• /
• 2023

Hesperetin(HT) is a potent antioxidant flavonoid aglycone derived from hesperidin(HD). The antioxidant, anti-inflammatory, and antimicrobial activities of HT and its cyclodextrin(CD) inclusion complexes were compared in vitro. HT was prepared by enzymatic hydrolysis of HD, and HT/CD complexes were prepared using 𝛽-cyclodextrin(𝛽-CD) and hydroxypropyl-𝛽-cyclodextrin(HP-𝛽-CD) by solvent co-evaporation method. The solubility of the HT/HP-𝛽-CD inclusion complex increased 93.5-fold compared to HT, and the solubility of HT/𝛽-CD increased 22.5-fold. The HT/HP-𝛽-CD inclusion complex showed a similar effect as HT on radical scavenging activity in antioxidant assays, whereas the HT/𝛽-CD inclusion complex showed slightly lower activity than HT. Cytotoxicity was low in the following order; HT/HP-𝛽-CD, HT/𝛽-CD, and HT in murine macrophage RAW264.7 cells. Treatment with HT and HT/CD inclusion complexes reduced the levels of inflammatory mediators such as nitric oxide(NO), tumor necrosis factor-𝛼(TNF-𝛼) and interleukin-6(IL-6) in the cells. HT and HT/HP-𝛽-CD inclusion complex were more effective than HT/𝛽-CD inclusion complex at relatively low concentrations. Inhibitory effects were tested on skin-pathogenic bacteria, Staphylococcus aureus and Pseudomonas aeruginosa, and they showed an antimicrobial effect on S. aureus in the order of HT = HT/HP-𝛽-CD > HT/𝛽-CD, but they did not show any significant inhibitory effect on P. aeruginosa. In conclusion, HT, the aglycone form of HD, and its CD inclusion complexes showed various biological activities. HT/HP-𝛽-CD inclusion complex, which is the highly soluble form of HT, showed relatively higher activity compared to HT/𝛽-CD inclusion complex.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.169-176
• /
• 2013

Objectives: The aim of this study is to critically review the health effects of not only direct exposure to biocide, but also indirect exposure to by-product hazardous agents generated through the use of biocide in metalworking operations. Methods: An extensive literature review was conducted of studies reporting on respiratory disease cases, particularly hypersensitivity pneumonitis (HP), in environments using water-soluble metalworking fluids (MWFs). Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation' 'machining operation' and 'biocide', which were also used in combination. Additional articles were identified in references cited in the articles reviewed. Results: Several of the field, epidemiological and experimental studies reviewed assumed that the symptoms and signs typical of HP developed in machinists who handled water-soluble MWF could be caused by inhalation exposure to nontuberculous mycobacteria (NTM). Most NTM are known to be not only resistant to both biocide and disinfectant, but also to have acid-fast cell walls that are highly antigenic. The presence or persistence of the Mycobacterium species, referred to as NTM, in metalworking fluid-using operations may be caused by NTM contamination in either the natural water or tap water that is used to dilute the base oil and additives for water-soluble MWFs. This hypothesis that NTM contamination in water-soluble MWFs is a causative agent of HP has high biologic plausibility, such as antigenic property, hydrophobicity and small diameter (< 5 um). Conclusions: Aerosolized mycobacteria colonized from MWF are likely to be causing the HP. Inhalation exposure to mycobacteria should be considered as a possible cause for the development of HP.

• Journal of the Korean Magnetic Resonance Society
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2009

HP (2-20), a 19-residue peptide derived from the N-terminus of Helicobacter pylori Ribosomal Protein L1, has antimicrobial activity but is not cytotoxic to human erythrocytes. Previously, we have synthesized several analogue peptides to investigate the effects of substitutions on the structure and antimicrobial activity. Substitution of $Gln^{16}$ and $Asp^{18}$ with Trp (Anal 3) caused a dramatic increase in bacterial and fungal lytic activities. In this study, analogue peptides were synthesized to investigate the effects of substitution of Gin and Asp with Phe (Anal 6) or Tyr (Anal 7) in HP (2-20) on its structure and antimicrobial activity. Substitution of Gin and Asp with hydrophobic aromatic residues at position 16 and 18 of HP (2-20) caused increase in antibiotic activity without hemolytic effect. Substitution of Gin and Asp with Trp and Try increased antibiotic activity of HP (220) twice more compared to substitution with Phe. The tertiary structures of Anal 6 and Anal 7 in SDS micelles has been investigated using NMR spectroscopy. The structures revealed that substitutions of the aromatic residues at C-terminus resulted in longer and well defined alpha-helix and improved their antibacterial activities