• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.161-168
• /
• 2010

This study aims to propose a method that shall rapidly acquire 3D information of the fast and frequently changing city areas by using the images taken by the UAV photogrammetric method, and to develop the process of the acquired data. For this study's proposed UAV photogrammetric method, low-cost UAV and non-metric digital camera were used. The elements of interior orientation were acquired through camera calibration. The artificial 3D model of the artificial structures was constructed using the image data photographed at the target area and the results of the ground control point survey. The digital surface model was created for areas that were changed due to a number of civil works. This study also analyzes the proposed method's application possibility by comparing a 1/1,000 scale digital map and the results of the ground control point survey. Through the above studies, the possibilities of constructing a 3D virtual city model renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.78-88
• /
• 2006

This paper is to apply Geographical Information System (GIS) supported Geomorphoclimatic Instantaneous Unit Hydrograph (GCIUH) approach for the calculated flash flood trigger rainfall of the mountainous area. GIS techniques was applied in geography data construction such as average slope, drainage area, channel characteristics. Especially, decided stream order using GIS at stream order decision that is important for input variable of GCIUH. We compared the GCIUH peak discharge with the existing report using the design storm at Chundong basin($14.58km^2$). The results showed that derived the GCIUH was a very proper method in the calculation of mountaunous discharge. At the Chundong basin, flash flood trigger rainfall was 12.57mm in the first 20 minutes when the threshold discharge was $11.42m^3/sec$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.80-89
• /
• 2008

Mapping applications using satellite imagery have been possible to quantitative analysis since SPOT satellite with stereo image was launched. Especially, high resolution satellite imagery was efficiently used in the field of digital mapping for the areas which are difficult to produce large-scale maps by aerial photogrammetry or carry out ground control point surveying due to unaccessibility. This study extracted the geospatial information out of consideration for topographic characteristic from ortho imagery of the National Geospatial-intelligence Agency(NGA) in the United States of America and analyzed the accuracy of plane coordinate for ortho imagery. For this purpose, the accuracy according to topographic character by comparison between both extraction data from ortho imagery and the digital topographic maps of 1:5000 scale which were produced by Korea National Geographic Information Institute(NGI) was evaluated. It is expected that the results of this study will be fully used as basic information for ground control point acquisition or digital mapping in unaccessible area.

• Journal of the Korean association of regional geographers
• /
• v.21 no.3
• /
• pp.608-617
• /
• 2015

This paper synthetically analyzes micrometeorological data and geomorphological features of Doeksan-ri Eoreumgol(ice valley) Yeongdeok-gun in order to investigate occurrence characteristics of the ice valley and a mechanism for freezing in summer. This ice valley is located in the distal end of a talus and intensity of cooling and freezing in summer seems to be related to morphology and dimensions of talus. Cooling in the ice valley is generated by cold air flows that move down to the bottom of talus from high mountains through pores and voids, then debris in talus is supercooled by the cold air. For it forms a stable state in and around voids cold air is stagnating in the lower end of talus. This causes freezing in summer at outpour points. Furthermore humidity condition of external air and vaporization heat is a key factor when freezing.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.119-128
• /
• 2014

The environmental survey in advance in the construction works is very important for planning and designing as well as the service of field survey before carrying out construction. The topographical application of spatial information coupled with USN is the very economical method for the survey and research every processing stage of construction field in advance. Therefore the execution of very important role for environmental planning and fundamental designing of construction reduces the unnecessary trial and error through the environmental survey in advance. In this research the environment of existent construction field is transformed to that of digital spatial information by fusing the sensor network with wireless technique on the base of spatial position. In addition, the sink sensor cumulates the environmental data measured from each USN sensor using small wireless environmental sensors installed at the construction site and changes of various environmental data at the present constructing site are able to be monitored at 3-D topographical space in real time by using the method for transmitting the image of PC output based on TinyOS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.107-118
• /
• 2014

The objective of this study is to suggest a method for estimating rainfall-runoff relationship using runoff analysis with satellite rainfall and global geographic data for the region due to lack of observed data. This study uses CMORPH and GSMaP_NRT as satellite rainfall data, and GTOPO30 and GLCC as global geographic data. IFAS is used for runoff modeling. In the evaluation of rainfall data, the correlation coefficients of CMORPH and GSMaP_NRT with observed data are 0.37 and 0.30 respectively. Calculated peak runoffs using IFAS show small relative errors with observed data in case of parameters are not calibrated with satellite rainfall data. Therefore, the methods suggested in this study could be applied to ungauged watershed. In the future, this study will analyze runoff for North Korea, a representative inaccessible region, using satellite rainfall and global geographic data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.193-203
• /
• 2006

This study conducts mapping of the results of topographical dissected degree analysis using GIS and analyzes relation between dissected degree and land use of study area. Application of GIS typographical dissected degree analysis can greatly save time and efforts comparing with traditional manual work, and makes it possible to vary analysis variables widely, which gives possibility to carry out 2-dimensional research using these results. This study, taking start from such background, tries to find the way to carry out dissected degree analysis with the use of GIS, compares the results of the analysis with the land use map, and tries to find the ways of practical application of this analysis results. The results of analysis of the relation between basin dissected degree and agricultural land use of Gangneungnamdae river study area show that for agricultural land use topographical dissection is mostly distributed in quite developed area. Specifically, land used for paddy and dry fields appeared to have higher level of correlation with dissection degree. When comparing dissected degree and agricultural land use interrelation for each area, comparison of intensively formed urban districts with suburbs showed low correlation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.50-66
• /
• 2010

In this study, we performed a GIS-based debris flow simulation using the high-resolution airborne LiDAR DEM in order to establish the effective and resonable debris prevention plans in Korea. To do so, we set a study area to an specific region over Pyeochang-gun in Kangwon-do which showed the extreme rugged distribution of topography and simulated a possibility of debris flow occurrence in this area using a GIS-based numerical simulation program which was developed by applying the finite difference method. After that, we also performed the debris flow simulation by SINMAP and geomorphic analysis method in the same region and compared each result with that of GIS-based debris simulation for verifying the reliability.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.615-623
• /
• 2015

Estimation of wind load on bridges is one of the most important aspects in designing bridges in coastal region. Various design codes and researches have suggested the procedure to estimate design wind speed; however, they do not match one another due to many reasons such as incomplete data set, ignorance of wind environment and so on. For this reason, the necessity of guideline for estimation procedure of basic wind speed which reflect the roughness of surface and the topographical effect have been increasing. In this study, we have analysed limitations of the basic wind speed of nationwide suggested by Korea Building code(AIK, 2009) and Highway bridge design code(MOLTMA, 2010). In additional, we set forth guidelines considering the roughness of land surface and the topographical effect. Using the procedure, the basic wind speed were estimated for 15 coastal regions in Korea and compared with those listed in the existing codes.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.259-266
• /
• 2014

Understanding the forest fire patterns is necessary to comprehend the stability of the forest ecosystems. Thus, researchers have suggested the simulation models to mimic the forest fire spread dynamics, which enables us to predict the forest damage in the scenarios that are difficult to be experimentally tested in laboratory scale. However, many of the models have the limitation that many of them did not consider the complicated environmental factors, such as fuel types, wind, and moisture. In this study, we suggested a simple model with the factors, especially, the geomorphological structure of the forest and two types of fuel. The two fuels correspond to susceptible tree and resistant tree with different probabilities of transferring fire. The trees were randomly distributed in simulation space at densities ranging from 0.5 (low) to 1.0 (high). The susceptible tree had higher value of the probability than the resistant tree. Based on the number of burnt trees, we then carried out the sensitivity analysis to quantify how the forest fire patterns are affected by the structure and tree density. We believe that our model can be a useful tool to explore forest fire spreading patterns.