• Title/Summary/Keyword: 한국 제4기학회

Search Result 2,993, Processing Time 0.039 seconds

Areal Distribution Ratios of Constituent Rocks with Geologic Ages and Rock Types by GIS in the Gyeongsangbug-Do and Daegu Areas (GIS에 의한 경북-대구지역 구성암류의 지질시대별 및 암종별 분포율)

  • Yun, Hyun-Soo;Lee, Jin-Young;Yang, Dong-Yoon;Hong, Sei-Sun;Kim, Ju-Yong;Yi, Sang-Heon
    • The Journal of the Petrological Society of Korea
    • /
    • v.19 no.1
    • /
    • pp.1-18
    • /
    • 2010
  • On the ArcGIS 9.2 program in Gyeongsangbug-Do and Daegu areas, distribution ratios of rock types and geologic ages were obtained from the 1 : 250,000 scaled digital geologic and geomorphic maps. The obtained distribution ratios here will be used the geologic information data for industrialization and development planning of rock resources. The Gyeongsangbug-Do area consists of 86 rock types that can be divided into 10 large groups in geologic age. Their geologic distribution ratios show the decreasing in the order of Cretaceous, Precambrian, Jurassic, Quaternary, Age-unknown and Tertiary, all of which occupy the prevailing ratio of 96.30% in the area. Of which, sixteen rock types are somewhat dominant ones (64.04%). They are of Precambrian Yulri group and granite gneiss of the Yeongnam metamorphic complex and biotite gneiss of the Sobaegsan metamorphic complex, Age-unknown granite, Jurassic granite, Cretaceous Gasongdong and Dogyedong formations of the Yeongyang sub-basin, Nagdong and Chunsan formations and intermediate-basic volcanics of Euiseong sub-basin, Jinju and Jindong formations and andesite-andesitic tuff of Milyang sub-basin, and hornblende granite, and Quaternary alluvium. They show relatively narrow ranges of 2.07-6.53% in geologic distribution in exception of Jurassic granite showing 13.14%. And the rest 70 rock types appear to very narrow range between 0.01 and 1.94 %. On the other hand, twelve rock types are developed in the Daegu area. Their geologic ages appear to be classified into Cretaceous and Quaternary occupying 86.05% and 11.39%, respectively. Seven rock types take possession of 94.04% among the all rocks. The major rock types are Jinju formation of the Sindong group, Chilgog, Haman and Jindong formations of the Hayang group, andesite and andesitic tuff, hornblende granite and Quaternary alluvium. With exception of andesite and andesitic tuff of 37.40%, the types show slightly wide range of 3.25-17.39%, which apparently differ trends from that of Gyeongsangbug-Do area. And the rest of rock types have narrow ranges of 0.22-1.81% in the Daegu area.

Distribution of Vascular Plants at the Ecological Landscape Conservation Area Heoninlleung in Seoul (서울시 생태.경관보전지역 헌인릉의 관속식물 분포)

  • Kim, Kun-Ok;Hong, Sun-Hee;Lee, Yong-Ho;Na, Chae-Sun;Kang, Byeung-Hoa;Son, Yo-Whan
    • Korean Journal of Plant Resources
    • /
    • v.23 no.1
    • /
    • pp.60-78
    • /
    • 2010
  • To clarify the distribution of vascular plants and their usefulness in Heoninlleung, Ecological Landscape Conservation Areas of Seoul, we investigated it from April, 2006 to June, 2009. Total 313 taxa; 68 families, 191 genera, 264 species, 41 varieties and 8 forma were distributed in Heoninlleung. Among them, 37 taxa were highly abundant everywhere (3A), 16 taxa were highly abundant locally (3B), 70 taxa were moderately abundant everywhere (2A), 96 taxa were common in certain regions locally (2B), 9 taxa were rare but observed everywhere with low frequency (2A) and 85 taxa were rare and observed locally (1B). The economic plants were 293 taxa. There were 156 taxa of edible source, 223 taxa of medicinal source, 141 taxa of ornamental source, 69 taxa of pastoral source, 12 taxa of industrial, and 8 taxa of timber source. Twelve Korean endemic plants were collected. Based on the list of rare plants by the Korea National Arboretum and Ministry of Environment, 2 rare species were found. The specific species of I~V grades by phytogeography were 19 taxa. And twentyfour taxa of naturalized plant species were distributed. Naturalization Index was 7.7% and Urbanization Index was 8.4% in the investigated area.

Studies on the Enzyme from Arthrobacter luteus Accelerating the Lysis of Yeast Cell Walls - I. Effects of Various Factors on the Lysis of Yeast Cell Walls by the Preparation of Crude Zymolyase (Arthrobacter luteus가 생산(生産)하는 효모(酵母) 세포벽(細胞壁) 용해(溶解) 촉진(促進) 효소(酵素)에 관(關)한 연구(硏究) - 제(第) 1 보(報) : Zymolyase 조(粗) 효소(酵素)에 의한 효모(酵母) 세포벽(細胞壁) 용해(溶解)에 미치는 제(諸) 인자(因子)의 영향(影響) -)

  • Oh, Hong-Rock;Shimoda, Tadahisa;Funatsu, Masaru
    • Korean Journal of Food Science and Technology
    • /
    • v.11 no.4
    • /
    • pp.242-248
    • /
    • 1979
  • To detect proper lytic assay conditions of the crude zumolyase from Arthrobacter luteus, effets of the various factors involved in the lytic system of Sacchromyces sake cultured with shaking in the malt extracts medium were investigated. The results are summarized as follows : 1. The susceptibilities of viable cells of S. sake from logarithmic growth phase to the lytic enzmye were much greater than those of the cells in lag and stationary phases. The cells cultured for 18 hr were the most susceptible to the enzyme. 2. Lytic activity of the enzyme toward the viable cells of S. sake was very low. It was, however, enhanced 4 folds of more by the pretreatment of the cells with 0.05 M sodium sulfite. 3. Lytic activity of the enzyme toward commercial baker's yeast cells was negligible, and the effect of sodium sulfite on the lysis of the cells also was nothing but a little. 4. The lyophilized cells of the baker's yeast showed more susceptibility to the lytic enzyme than viable cells of the yeast. No definite effect of sodium sulfite on the lysis of the lyophilized cells, however, was observed either baker's yeast of S. sake. 5. It appeared that the relationship between the reaction rate and the enzyme concentration on the lysis of the yeast cell walls followed enzyme kinetic theory, but one between the reaction rate and concentration of the yeast cells as substrates showed different pattern from that in enzyme kinetic theory. 6. After the preparation of crude zymolyase was kept at $7^[\circ}C$ for 10 days in the 0.05 M phosphate buffer, pH 7.5, the remainning lytic activity was about 80 %.

  • PDF

Development of a Prototype Mass Spectrometer (질량 분석기의 원형 모델 개발)

  • Jingeun Rhee;Nam-Seok Lee;Sung Won Kang;Seontae Kim;Kyu-Ha Jang;Yu Yi;Ik-Seon Hong;Cheong Rim Choi;Kyoung Wook Min;Jongil Jung
    • Journal of Space Technology and Applications
    • /
    • v.3 no.1
    • /
    • pp.86-99
    • /
    • 2023
  • The mass spectrometer, being an essential scientific instrument for uncovering the origin of the solar system and life, has been used since the early 1970s on board spacecraft to obtain information of neutral and ionized elements in the atmosphere and surface of the moon, planets, asteroids, and comets. According to the 4th Basic Plan for the Promotion of Space Development (2023-2027), Korea plans to conduct lunar landing in 2032 and Mars landing in 2045 as the core goals of the plan and focuses on developing the technologies required for unmanned robotic exploration missions. In this regard, it is crucial to develop the technology of a mass spectrometer, which is the most fundamental payload for space exploration for maximized scientific achievements, however never tried before in any domestic space missions. We describe in this paper the principle of a domestically developed quadrupole mass spectrometer, its prototype model, and the test results of its performance. We conclude this paper with intended future improvements.

Comparison of Spodoptera frugiperda Control Effects for Corn According to the Control Thresholds and Chemical Spraying Methods (열대거세미나방에 대한 옥수수의 요방제 수준 및 약제 살포방법에 따른 방제 효과 비교)

  • You Kyoung Lee;Hyun Ju Kim;Nak Jung Choi;Bo Yoon Seo;June Yeol Choi
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.25 no.3
    • /
    • pp.142-150
    • /
    • 2023
  • As global warming continues, the time of invasion of Spodoptera frugiperda has been advanced and the inflow rate has been increasing, leading to great increases in damage to crops. In this study, in order to minimize crop damage caused by S. frugiperda, the control period was set for corn fields through control thresholds, and the control effects according to the chemical spraying methods were investigated in forage corn filed. Even under the condition of 4% injury level during the corn silking stage, the damage rate of ear was 70%, showing an aspect of extensive damage. The economic injury level of S. frugiperda second instar larvae was shown to be 0.7 larvae per stalk, and the control threshold level was shown to be 0.6 larvae. The income was calculated by applying the corn wholesale unit price, and according to the result, even under the condition of injury level of 4%, there was a loss of KRW 895,221/10a, and the higher the injury level, the greater the decrease in income. To control S. frugiperda, the insecticidal effects of 10 single formulations registered for S. frugiperda were tested, and according to the results, four types(emamectin benzoate, chlorantraniliprole, indoxacarb, and spinetoram) showed high insecticidal activity not lower than 93.3%, and three types (chloran- traniliprole, spinetoram, and indoxacarb) were considered to be effective in controlling S. frugiperda as they showed high residual effects through insecticidal effect persistence tests. Therefore, conventional control and aerial control were conducted twice at 7-day intervals with indoxacarb SC and chlorantraniliprol WP, which show high activity against S. frugiperda, respectively, prior to the silking of forage corn. As a result, conventional control showed higher control values, 46.3%p in the case of indoxacarb SC and 21.7%p in the case of chlorantraniliprol WP, than aerial control through the primary control. In the secondary control too, higher control values of 26.7%p in the case of indoxacarb SC and 40.4%p in the case of chlorantraniliprol WP were found in conventional control than in aerial control. Therefore, it is considered necessary to prepare measures to improve the control effects in the recent situation where alternative methods for manpower control are widely used.

Seed Production Studies in Italian Ryegrass ( Lolium multiflorum Lam. Itailcum ) I. Effect of seeding time and seed rates of Italian ryegrass, cv. Tetrone on seed production (이탈리안 라이그라스의 종자생산에 관한 연구. 제1보. 파종기와 파종량이 종자에 미치는 영향)

  • 박병훈;이남종
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.4 no.3
    • /
    • pp.226-234
    • /
    • 1984
  • In order ti find out the optimum seeding time(OST) and optimum seed rate(OSR) of Italian ryegrass on seed production, this studies with tetraploid cv. Tetrone were carried out on the experimental field of Livestock Experiment Station. Treatments included seed rates of 1, 2, 3 and 4 kg per 10a and combined with seeding time on 20, 30 Aug, 9, 19 and 29, September 1983. Seeds were sown in rows 50 cm apart and were spaced in a continuous line with width of 15 cm within the rows. The results are summarized as follows: 1. Autumn tillers could be classified into three groups from winter-killing point of view, namely winter-killing completely, damaged growing point only and living tillers. 2. The young inflorescence-bearing stem in Italian ryegrass which were sown earlier than 9. September were more susceptible to winter killing. Tiller buds in those stems which originated from an axillary buds at the stem base within senescent leaf-sheaths emerged lately in spring, and consequently heading was delayed, culm length shortened and seed yield reduced. 3. Tiller buds which originated from damaged growing point only and living tillers in moderate shoots emerged early in spring and those tillers became mainly spike-bearing culm. 4. The emergence-time of tillers influenced on culm-, spike- length and ripenness more than seeding time and seed rate. 5. Seed yield was mostly affected by the number of spikes per unit area. 6. For the safety of over-wintering and enough spikes on seed production, OST and OSR at Suweon were the last part of September and 2-3 kg per 10a, respectively. Especially OSR was 2 kg per 10a for early and 3 kg per 10a for late OST.

  • PDF

Stuides on Major Morphological Traits, Yield and Yield Components of Barley II. Variations of Growth and Developmental Patterns, and Grain Yield by Different Locations and Sowing Dates (대맥의 생육 및 수량구성형질연구 제 2보 지역 및 파종기에 따른 대맥의 주요생태와 수량구성 형질의 변이)

  • 류용환;하용웅
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.31 no.1
    • /
    • pp.97-103
    • /
    • 1986
  • In order to investigate the important morphological traits, and grain yield and its components on basis of regional variation of barley plant, Olbori was tested at 3 locations Suwon, Daejeon and Jinju for 3 years. It needed seven days around 15$^{\circ}C$ of daily average temperature for seed emergence. 104 to 144 days for Daejeon and 135 to 142 for Jinju after sowing are needed for productive tillers according to the different sowing dates, and % of productive tillers were ranged on 37-77%, showing higher value at the southern region. Young spike elongated slowly at early stage, and after floret differentiation it appeared rapid development with 1.05-1.95 mm elongating per day. Analysis of variance indicated that only number of kernels/spike showed significant differences among locations, but every traits related to grain yields revealed the significant differences among different sowing dates. Little differences between locations existed on grain yield but its large variation appeared between sowing dates, especially indicating more variation at northern regions.

  • PDF

Preparation of Adhesive Sheet from Several Types of Crosslinking Agents and Their Adhesion Characteristics with Various Substrates (가교제 종류에 따른 점착시트 제조 및 다양한 피착재에서의 점착 특성 연구)

  • Hyun ji Kim;Seung In Kang;Ho Kyoon Jeon;Ji Eun Lee;Hyun Ju Park;Jong Hwan Lee;Dong Gi Seong
    • Journal of Adhesion and Interface
    • /
    • v.25 no.3
    • /
    • pp.93-99
    • /
    • 2024
  • In this study, acrylic pressure sensitive adhesive (PSA) using butyl acrylate and butyl methacrylate as basic monomers and functional monomer such as acrylic acid was synthesized. Adhesive sheet was prepared by using three types of crosslinking agents (isocyanate, amine, aziridine) containing a functional group reacting with carboxyl group. The correlation between the PSA and substrate was studied by evaluation the peel strength according to the four substrates (polypropylene, acrylonitrile butadiene styrene, stainless steel, and glass). The polarity of the PSA increases with the amount of the crosslinking agent, and the surface energy also increases due to the influence of the crosslinking agent. Regardless of the type of crosslinking agent, the tack decreases as the content increased, and it was confirmed by the gel fraction measurement that the type of crosslinking agent had influence on the crosslinking. As a result of peel strength evaluation, excellent adhesion characteristics were expressed for all substrates when amine crosslinking20240809 agent was used.

Studies of Annealing Effect on the Properties of the Rigid Polyurethane (열처리에 따른 경질 폴리우레탄의 물성 변화 연구)

  • Kang S. J.;Jung H. C.;Kim W. N.;Lee Y. B.;Choe K. H.;Hong S. H.;Kim S. B.
    • Journal of the Korean Institute of Gas
    • /
    • v.2 no.4
    • /
    • pp.18-24
    • /
    • 1998
  • Polyurethane (PU) synthesized from 4,4'-diphenylmethane diisocyanate having high functionality (f=2.9) and polyester polyol have been investigated by differential scanning calorimeter (DSC), dynamic mechanical thermal analyzer (DMTA), and Fourier transform infrared spectroscope (FT-IR). From the DSC measurement of polyurethane, a single transition temperature ($T_g$) was observed. This result indicates that polyurethanes synthesized in this work have homogeneous network structure due to high functionality of diisocyanate. It was also found that the $T_g$ of polyurethane was increased as hard segment content was increased. The results from DMTA measurement are consistent with DSC results. In order to investigate the effect of thermal annealing on the $T_g$ of polyurethane, the samples were annealed at various annealing conditions. $T_gs$ of polyurethanes were found to increased with annealing temperature. From swelling experiment and FT-IR studies, it was found that the $T_g$ was increased as crosslinking density of polyurethane was increased.

  • PDF

Efficient Implementation of Pseudorandom Functions for the e-seal Protection Protocol (E-seal 보안 프로토콜을 위한 Pseudorandom Function의 효율적인 구현)

  • Min Jung-Ki;Kang Seok-Hun;Chung Sang-Hwa;Kim Dong-Kyue
    • Proceedings of the Korea Institutes of Information Security and Cryptology Conference
    • /
    • 2006.06a
    • /
    • pp.715-718
    • /
    • 2006
  • e-seal은 RFID 기술을 사용하여 원격에서 자동으로 봉인상태를 확인할 수 있는 컨테이너 봉인 장치를 말한다. RFID의 특징상 반도체 칩에 기록된 정보를 제 삼자가 쉽게 판독 및 변조할 수 있다는 취약점이 있는 실정이다. ISO에서는 RFID의 취약점을 보안하기 위한 표준작업(ISO 18185)을 진행 중이다. 이 중, ISO 18185-4는 e-seal에 저장되는 자료나 리더와의 RF통신에서 데이터 보호를 위한 표준이며, 관련된 연구로는 Active-RFID 인증 프로토콜과 ISO 18185-4를 위한 보고서로 제출된 보안 프로토콜 등이 있다. 제안된 e-seal 보안 프로토콜을 적용하기 위해서는 e-seal과 리더 간의 데이터를 암/복호화 키를 Pseudorandom Function(PRF)을 이용하여 마스터 키로부터 MTK(Mutual Transient Key)를 유도하고, MTK를 암/복호화 키로 사용해야 할 필요가 있다. 본 논문에서는 현재 보안 프로토콜에서 사용되고 있는 PRF에 대해 살펴보고, e-seal 환경에서 PRF를 소프트웨어로 구현하였다. 구현 결과 해시 함수를 기반으로 하는 PFR보다 암호화 알고리즘 AES를 기반으로 하는 PRF이 더 좋은 성능을 보였으며, 블록 암호화 알고리즘인 AES-128을 어셈블리어로 구현함으로써 PRF를 최적화하였다.

  • PDF