• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.439-442
• /
• 2001

선로상에 열차의 은행에 지장을 주는 장애물들 검지하였을 때 반대편 열차에 알리거나 열차내의 긴급한 상황이 발생하였을 경우에 대비하여 열차와 지상의 사령과는 항상 열차무선을 통하여 정보를 교환한다. 초창기에 사용하는 열차무선시스템은 열차의 운행빈도나 사용자의 측면에서 아날로그방식의 음성통화로 충분한 서비스를 제공할 수 있었으나, 근래에는 고밀도의 열차운행 및 고속화로 다수의 사용자가 요구하는 서비스를 충족하기에는 많은 개량할 부분을 가지고 있다. 통신기술의 발전과 더불어 한국의 고속철도에서 사용예정인 열차무선시스템은 이러한 사용자들의 요구를 충족하기 위해 통신망의 개념을 도입하고 디지털의 TRS 시스템을 이용하여 많은 사용자의 요구를 충족하려고 노력하고 있다. 또한, 유럽에서 여러 국가를 횡단하는 고속열차의 경우 열차무선시스템에서 횡단하는 국가들간의 호환성을 극복해야하는 문제 등을 가지고 있다. 본 연구에서는 기존 VHF방식의 개량할 점과 TRS시스템의 특징 및 유럽에서 사용중인 열차무선시스템의 운영방법 등을 통하여 열차무선의 발전방향을 제시하고자한다.

• Journal of the Korean Institute of Gas
• /
• v.13 no.3
• /
• pp.7-14
• /
• 2009

Many countries are managing the transportation of hazardous materials under the specific provisions especially, as well as use, storage and management, because of their high risks. For the purpose of the revision of rail safety law for the safe transportation of hazardous materials, amount and kind of hazardous materials transported by rail in Korea are analysed and the standards of classification of hazardous materials are compared in domestic and abroad. There are lots of benefits for national rail safety law to implement an international law because our country's geographic location is convenient to connect the continent and to across the border. It is suggested that implementing a classification and test methods of hazardous materials enable to use internationally for the preparation of rail transportation to be increased.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.349-351
• /
• 2022

1차 안전기준은 안전한 공사관리를 위한 목표치이며, 2차 주의기준은 주변구조물이나 주민에게 안전에 영향을 미칠 수 있는 범위 값이며, 3차 정밀분석기준은 공사장 자체의 위험에 대비하는 기준을 의미 하므로 향후에는 계측항목별로 계측관리기준을 세분하여 적용하는 것이 필요하다.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.174-179
• /
• 2006

Recently, the crossing tunnel has been constructed frequently to connect the separated area by highway and railroad. The construction of crossing tunnel must be progressed while maintaining the existing traffic of the highway as well as railroad. There are many cross funnelling methods such as NTR, TRCM, Messer Shield, Front Jacking, and Pipe Roof Method. The advantages of adopting RPS(Roof Panel Shield) method in crossing tunnel construction with comparing other existing cross funnelling methods are needed a little volume of concrete and easy to change the direction of cutting shoe during the construction of pipe roof, The 3-dimensional numerical analysis of RPS to consider the arching effect was performed for the application in the crossing tunnel under railroad. The earth pressure distribution and settlement were predicted when the RPS method was applied during the excavation for crossing railroad tunnel construction.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2439-2449
• /
• 2011

Existing grade crossings between railway and roadway area gradually changed to grade separation systems by the law. In the case of new roadway construction which crosses railways, it shall be grade separation system in principle. With the railway underground crossing method, many practices have been developed which can minimize rail displacements and avoid rail release. With these methods, the effects to the train can be reduced. The underground crossing methods can be identified as open-cut methods and non open-cut methods. The open-cut methods include temporary support methods and special rail construction methods. Also the non open-cut methods includes pipe roof methods, front jacking methods, messer shield methods, NTR methods and JES methods. Among these, the most suitable method is applied considering safety, economy, class of each rail system (train passing frequency and velocity), etc. In the non open-cut methods, the cost and duration shall be increased to keep existing rail system during construction. In the open-cut methods which use plate girders, the rail speed shall be restricted due to the displacement and vibration of the girder. In this study new grade separation methods were developed. With this method, the safety during construction can be increased. This method refines temporary support methods, but pc slab girder with huge stiffness is applied instead of plate girders. With this method, the rail displacement can be reduced and higher safety can be obtained during construction. Also construction cost and duration can be minimized because the temporary work and the overburden soil depth can be reduced.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.595-600
• /
• 2007

Greater expansion and more frequent operation of the railroad transportation system anticipated due to its characteristics including low cost, safety and mass transportation. Recently, effects on the railway structures due to expansion of newly constructed road, construction of subway, city gas pipeline, communication network, electric power network and construction of other railway underground crossing in accordance with urban planning and organization has influenced safe operation of trains. Accordingly, standard for selection of construction method that will enable construction of more economical and rational subway underground crossing structures by preventing problems occurring at the time of above construction works and accidents in safe operation of trains due to construction in advance is definitively necessary. Although there are numerous construction methods that can be applied at the time of construction of railway underground crossing, there are much difficulties in selection of appropriate construction method that considers characteristics of each construction method on non-excavation type construction method, train operation plan of number of operational routes and on-site circumstances. Therefore, this research aims to present rational standard for selection of construction method for such, and standard for slowdown speed and interception of train when passing the areas of slowdown in sectors under construction.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.407-413
• /
• 2006

Railways are very important to get stability of railway structure as transportation system carrying a lot of passengers and freight. These days the construction of underground railway crossing such as expansion of new roads, construction of subway and gas pipe is increasing because of economic and social development. But these kinds of construction didn't take into account Cost-benefit analysis of railway which has the most important aspects of railway safety, so the results of construction didn't get a good evaluation. This study adapt Cost-benefit analysis to evaluate the economic validity of underground railway crossing. This study adjust about Cost-benefit analysis of railway part, and analyze the new method and technology of underground railway crossing constructed by Korean National Railroad and Railway Network Authority. Also this study divide between high frequency line and low frequency lineusing B/C, NPV, and IRR analysis. After analysis, B/C ratio method is the most suitable method among B/C, NPV, and IRR analysis method. Therefore this study can express economic benefit quantitatively and decrease the cost by adapting Cost-benefit analysis, and can clearly express the construction feasibility and investment effects of construction of underground railway crossing method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.251-259
• /
• 2006

For the electrification of the existing railways, the security of the restriction boundary of building with mechanistic stability research on the antiquated tunnel must be accomplished essentially. If the tunnel don't secure its restriction boundary of building, the reconstruction based on improvement of tunnel alignment are generated and its surveying data are required. The precise surveying was conducted with the same coordinate system for three tunnels of Youngdong tramline, and the restriction boundary of building of the straight and curve section were analyzed effectively by acquiring the data of profile and cross section, profile rail-height, rail-grade, cross tunnel height, and restriction boundary of building. This study is presented for valuation data of the stability of the electrification design to construct and analyze restriction boundary of building, which compared with the drawing and its existing design using profile and cross section. After this, it is interoperable to increase the development of real-time monitoring system on the tunnel structures.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.480-488
• /
• 2016

For the development of areas around railway lines, subsurface construction using the non-open cut method under the railway has recently been increased. However, when a structure under a railway is constructed, the stress release of the ground is not considered an important factor in the design. In this study, laboratory tests were conducted to determine a zone of stress relaxation. Field tests using an inclinometer were performed to measure the horizontal displacement of the ground during non-open cut construction. The stress release zone and the subgrade stiffness were investigated by numerical analysis. The results of the laboratory tests indicated that the failure zone in the ground was similar to a Rankine's active earth pressure zone. The measured data from the inclinometer in the field tests showed that displacements started when a steel pipe was pushed into the ground. The results of numerical analysis show that lateral earth pressure was also close to Rankine's active earth pressure. The roadbed support stiffness of the soil around the structure decreased to 40% of the original value. The ground around the subsurface structure constructed using nonopen cut methods should be reinforced to maintain the running stability of train.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.583-590
• /
• 2008

In construction work's design process, we must carry out a topographical survey for construction reserved land and to the basis of this, production of profile is indispensable factor for the purpose of every construction work such as road, rail way, canal and etc. From this research, the production of profile about construction reserved land, using topographical information of digital topographical map produced by NGIS project, construct precision 3D terrain model and from this, propose plans for utilizing by producing automatic profile. With the aim of this, extract every layers of main facilities and altitude from digital topographical map and while producing 3D terrain model by using this, we product automatic profile from precision 3D terrain model. And we was carried out to check whether the automatic produced profile's accuracy could be accepted at actual estimation by mutual analysis. It is considered that the result of the research could be suggested as a new techniques concept which can reduce the designing period and expenses and increase the efficiency of affair in the design process for the construction.