• Journal of Practical Engineering Education
• /
• v.16 no.3_spc
• /
• pp.259-265
• /
• 2024

In order to improve the SW convergence capabilities of university undergraduate students, methods to evaluate undergraduate students' code design capabilities should be researched along with the development of related courses. In previous studies, there were qualitative evaluation methods and quantitative relative evaluation methods for code results. In the quantitative relative evaluation method, the number of problem decomposition depth, number of function reuses, and number of functions were measured and evaluated. In this study, an evaluation method that was not presented in previous studies was proposed using the problem of presenting the number of input and output information types when designing code. The evaluation problems proposed in this paper applied up to three types of input information and three types of output information. Through this, five code design evaluation questions were presented and a method to quantitatively calculate code design scores was proposed. Codes from 100 student respondents were collected and analyzed through courses that applied the proposed evaluation method. Through result analysis, the number of problem decomposition depths was proportional to the number of types of input information, the number of function reuses was proportional to the number of types of output information, and the number of functions showed a correlation that was proportional to the total number of types of input and output information. Lastly, by analyzing the distribution of evaluation scores of 100 respondents, we demonstrated that the code design evaluation method according to the five input/output information condition evaluation problems is effective.

• Smart Media Journal
• /
• v.13 no.4
• /
• pp.33-48
• /
• 2024

With the advent of 5G, characterized by Enhanced Mobile Broadband (eMBB), Ultra-Reliable Low Latency Communications (URLLC), and Massive Machine Type Communications (mMTC), efficient network management and service provision are becoming increasingly critical. This paper proposes a novel approach to address key challenges of 5G networks, namely ultra-high speed, ultra-low latency, and ultra-reliability, while dynamically optimizing network slicing and resource allocation using machine learning (ML) and deep learning (DL) techniques. The proposed methodology utilizes prediction models for network traffic and resource allocation, and employs Federated Learning (FL) techniques to simultaneously optimize network bandwidth, latency, and enhance privacy and security. Specifically, this paper extensively covers the implementation methods of various algorithms and models such as Random Forest and LSTM, thereby presenting methodologies for the automation and intelligence of 5G network operations. Finally, the performance enhancement effects achievable by applying ML and DL to 5G networks are validated through performance evaluation and analysis, and solutions for network slicing and resource management optimization are proposed for various industrial applications.

• Convergence Security Journal
• /
• v.23 no.4
• /
• pp.109-119
• /
• 2023

C4I system is an integrated battlefield information system that automates the five elements of command, control, communications, computers, and information to efficiently manage the battlefield. C4I systems play an important role in collecting and analyzing enemy positions, situations, and operational results to ensure that all services have the same picture in real time and optimize command decisions and mission orders. However, the current C4I has limitations whenever a new weapon system is introduced, as it only provides battlefield visualization in a single area focusing on the battlefield situation for each military service. In a future battlefield that expands not only to land, sea, and air domains but also to cyber and space domains, improved command and control decisions will be possible if organic data from various weapon systems is gathered to quickly visualize the battlefield situation desired by the user. In this study, the visualization technology applicable to the future C4I system is divided into map area, situation map area, and display area. The technological implementation of this future C4I system is based on various data and communication means such as 5G networks, and is expected to enable hyper-connected battlefield visualization that utilizes a variety of high-quality information to enable realistic and efficient battlefield situation awareness.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.747-761
• /
• 2024

Recently, modern vehicles have been controlled by Electronic Control Units (ECUs), by which the safety and convenience of drivers are highly improved. It is known that a luxury vehicle has more than 100 ECUs to electronically control its function. However, the modern vehicles are getting targeted by cyber attacks because of this computer-based automotive system. To address the cyber attacks, automotive manufacturers have been developing some methods for securing their vehicles, such as automotive Intrusion Detection System (IDS). This development is only allowed to the automotive manufacturers because they have databases for their in-vehicle network (i.e., DBC Format File) which are highly confidential. This confidentiality poses a significant challenge to external researchers who attempt to conduct automotive security researches. To handle this restricted information, in this paper, we propose a method to partially understand the DBC Format File by analyzing in-vehicle network traffics. Our method is designed to analyze Controller Area Network (CAN) traffics so that checksum signals are identified in CAN Frame Data Field. Also, our method creates a Lookup Set by which a checksum signal is correctly estimated for a given message. We validate our method with the publicly accessible dataset as well as one from a real vehicle.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.87-109
• /
• 2020

Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.456-477
• /
• 2018

We analyzed the data on medicinal plants and related traditional knowledge in Korea and China using data analysis method. There are 108 families 214 genera 542 species, and 202 families 660 genera 1,261 species were found in Korea and China respectively. Total of 86 families (79.6%) and 130 genera (60.7%) were in common both countries. More than one information were recorded in many species, however, there was only one information from some species (32.7% of genera in Korea, and 58.8% of genera in China). The most frequent appeared plant family was Compositae (Asteraceae) in both countries (8.4% in Korea and 10.7% in China) and followed by Rosecease and Leguminocae (Fabaceae). Plant parts were classified 11 parts and roots were mostly used in Korea and whole plants in China. Usages were described in different terms of ailments or symptoms. There are 120 usage in Korea and 230 in China. Plant uses for the ailment or symptoms are pain, digestive system disorder, cold and etc. in Korea. In China, plants were mostly used for clear heat, digestive system disorder, cough and etc. Relation between the plant and ailment(symptom) of the top 10 plants in Korea and China was different although from same plant family. We also analyzed the relations between plant species and part used, and plants parts and ailment(symptom). With the data analysis method, we were able to collect the medicinal plant resources data and found the differences in plant resources, usage, and plant part for use. The result provide important information of the plant resources and related traditional knowledge of Korea for use of plant resources in industry and facilitate to plan a strategy to cope with Nagoya Protocol in the future.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.64-78
• /
• 2007

For Korean researchers, English is essential. In fact, this is the case for any researcher who is a non-native English speaker, as recognition and success is predicated on being published, while publications that reach the broadest audiences are in English. Unfortunately, university science and engineering programs in Korea often do not provide formal coursework to help students attain greater competence in English composition. Aggravating this situation is the general lack of literature covering this specific pedagogical issue. While there is plenty of information to help native speakers with technical writing and much covering general English composition for EFL learners, there is very little information available to help EFL learners become better technical writers. Thus, the purpose of this report is twofold. First, as most Korean educators in science and engineering are not well acquainted with pedagogical issues of EFL writing, this report provides a general introduction to some relevant issues. It reviews the importance of contrastive rhetoric as well as some considerations for choosing the appropriate teaching approach, class arrangement, and use of computer assisted learning tools. Secondly, a course proposal is discussed. Based on a review of student writing samples as well as student responses to a self-assessment questionnaire, the proposed course is intended to balance the needs of Korean EFL learners to develop grammar, process, and genre skills involved in technical writing. Although, the scope of this report is very modest, by sharing the considerations made towards the development of an EFL technical writing course it seeks to provide a small example to a field that is perhaps lacking examples.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.193-206
• /
• 2014

The objectives of the project are to increase farmers' income through GAP and to reduce the loss of agricultural produce, for which the Korean partner takes a role of transferring needed technologies to the project site. To accomplish the project plan, it is set to implement the project with six components: construction of buildings, installation of agricultural facilities, establishment of demonstration farms, dispatching experts, conducting training program in Korea and provision of equipments. The Project Management Committee and the Project Implementation Team are consisted of Korean experts and senior officials from Department of Agriculture, Myanmar that managed the project systematically to ensure the success of the project. The process of the project are; the ceremony of laying the foundation and commencing the construction of training center in April, 2012. The Ribbon Cutting Ceremony for the completion of GAP Training Center was successfully held under PMC (MOAI, GAPI/ARDC) arrangement in SAl, Naypyitaw on June 17, 2012. The Chairman of GAPI, Dr. Sang Mu Lee, Director General U Kyaw Win of DOA, officials and staff members from Korea and Myanmar, teachers and students from SAl attended the ceremony. The team carried out an inspection and fixing donors' plates on donated project machineries, agro-equipments, vehicles, computers and printer, furniture, tools and so forth. Demonstration farm for paddy rice, fruits and vegetables was laid out in April, 2012. Twenty nine Korean rice varieties and many Korean vegetable varieties were introduced into GAP Project farm to check the suitability of the varieties under Myanmar growing conditions. Paddy was cultivated three times in DAR and twice in SAl. In June 2012, vinyl houses were started to be constructed for raising seedlings and finished in December 2012. Fruit orchard for mango, longan and dragon fruit was established in June, 2012. Vegetables were grown until successful harvest and the harvested produce was used for panel testing and distribution in January 2013. Machineries for postharvest handling systems were imported in November 2012. Setting the washing line for vegetables were finished and the system as run for testing in June 2013. New water tanks, pine lines, pump house and electricity were set up in October 2013.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.293-322
• /
• 2021

The present study examined the scientific awareness appearing in Korean tokusatsu series by focusing on Vectorman: Warriors of the Earth. As a work representing Korean tokusatsu series, Vectorman: Warriors of the Earth achieved the greatest success among tokusatsu series. This work was released thanks to the continued popularity of Japanese tokusatsu since the mid-1980s and the trend of robot animations. Due to the chronic problems regarding Korean children's programs-the oversupply of imported programs and repeated reruns-the need for domestically produced children's programs has continued to come to the fore. However, as the popularity of Korean animation waned beginning in the mid-1990s, inevitably the burden fr producing animation increased. As a result, Vectorman: Warriors of the Earth was produced as a tokusatsu rather than an animation, and because this was a time when an environment for using special effects technology was being fostered in broadcasting stations, computer visual effects were actively used for the series. The response to the new domestically produced tokusatsu series Vectorman: Warriors of the Earth was explosive. The Vectorman series explained the abilities of cosmic beings by using specific scientific terms such as DNA synthesis, brain cell transformation, and special psychological control device instead of ambiguous words like the scientific technology of space. Although the series is unable to describe in detail about the process and cause, the way it defines technology using concrete terms rather than science fiction shows how scientific imagination is manifesting in specific forms in Korean society. Furthermore, the equal relationship between Vectorman and the aliens shows how the science of space, explained with the scientific terms of earth, is an expression of confidence regarding the advancement of Korean scientific technology which represents earth. However, the female characters fail to gain entry into the domain of science and are portrayed as unscientific beings, revealing limitations in terms of scientific awareness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.162-168
• /
• 2012

Purpose: Teeth are generally exposed when people smiling. Moreover, the exposed teeth and soft tissue when smiling becomes an important guideline for esthetically prosthetic restoration. This research is to compare and find out differences of Korean young men's smile living in presence and twenty years ago. Materials and methods: Subjects, 100 young men (50 male and 50 female), were required about several aspects; normally developed physical condition, no psychological or genetic disorders, a fine face with no loss of teeth, no experience in orthodontic or prosthetic treatment, relatively normal occlusion, aged between 20-29. The photos of the subject at rest position and front face when fully smiled were taken three times. 100 photos (50 male and 50 female) were chosen at random from the 240 university students' smile photos taken by Yoon and his colleagues in 1991. By Hulsey's method of measuring smile, several factors; the change of upper lip curvature, the change of the relation between the upper lip and teeth, parallelism between Mx. incisor and lower lip, contact relation between Mx. incisor and lower lip and teeth displayed in a smile, were measured and analyzed. Meanwhile, ten dentists assessed aesthetic evaluation about men and women's smile for twice and recorded and compared smile score. The -test (P<.05) was used to compare the measured value. The difference of smile score was analyzed by t-test (P<.05). Results: The smile score calculated in 2011 (60.22) was higher than that of 1991 (52.80). Among five measurement categories, the noticeable difference was distinguished from two factors; the change of upper lip curvature and contact relation between Mx. incisor and lower lip. Conclusion: The Korean young men's smile has been considerably improved for twenty years. And it is found that the change of upper lip curvature plays an important role, that is, the smile formed with an ascended labial commissure has been increased significantly.