• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.289-292
• /
• 2004

원자력발전소 MMIS(Man-Machine Interface System)는 발전소 공정과 관련 장비들을 감시 및 제어하고, 필요시에 보호기능을 수행함으로써 발전소를 안전하고 신뢰성 있게 운전할 수 있도록 지원하고 있다. 그러한 MMIS의 설계에 소프트웨어기반의 컴퓨터 기술이 사용된 경우, 그 설계를 구현하기 위해 사용된 소프트웨어가 설계 및 프로그래밍 오류에 취약하여, 공통유형의 소프트웨어 오류로 인해 하드웨어로써 구축된 다중성 설계를 파기시킬 수 있기 때문에 원자력 발전소의 안전 및 안정 운전과 직결되게 된다. 또한 소프트웨어는 설계공정 결함이 일반적으로 최종 결과물에서 확인될 수 있다는 점 때문에 확인 및 검증기술을 정립하고 체계적인 적용이 필수적이다. 이에 따라 본 논문에서는 현재 설계를 진행중인 SMART(System-integrated Modular Advanced ReacTor) MMIS 소프트웨어를 개발하기 위해 적용되는 확인 및 검증 규제요건을 분석하고, 소프트웨어 개발생명주기에 따른 확인 및 검증을 체계적으로 수행하기 위한 프레임웍을 제시한다.

• 터널과지하공간
• /
• 제12권1호
• /
• pp.43-51
• /
• 2002

한국원자력연구소에서는 80년대 말부터 1996년까지 저준위 방사성 영구처분 연구사업을 수행한 바 있으며 2000년부터는 국가원자력중장기연구개발사업의 일환으로 한국원자력연구소와 한국수력원자력주식회사가 동굴 처분 관련 안전성 평가 연구를 공동 수행하고 있다. 본 기술 보고에서는 그 동안 개발된 연구 개발 성과들을 중심으로 중저준위 방사성폐기물 처분장 장기 안전성 평가에서 고려되어야 할 요소들과 현재까지 정립된 안전성 평가 방안들에 관하여 정리하였다.

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2011

This study evaluated the microbial population (total aerobic count, fungi) and organoleptic quality of freeze-dried bibimbap sterilized by gamma irradiation to develop the space food. An irradiation dose above 30 kGy was needed to sterilize the freeze-dried bibimbap, while organoleptic quality of the sample was significantly decreased by irradiation (p<0.05). However, it was observed that scores on overall acceptance of rehydrated bibimbap after irradiation were the highest, when vitamin C and paprika extract were added at 0.1%, respectively. Therefore, it was considered that the freeze-dried bibimbap could be developed as a space food, which meet microbial requirements and organoleptic quality through addition of vitamin C 0.1% and paprika extract 0.1% before gamma irradiation at 30 kGy.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.297-303
• /
• 2011

The purpose of this research is to detect whether agricultural products were electron beam irradiated or non-irradiated by chemical methods according to increase of storage period. The three fat-rich samples including soybean, walnut, and sesame were chosen as agricultural products, and then were irradiated with doses of 1~10 kGy by using 10 MeV electron beam facility. At the result, 8-heptadecene and 1,7-hexadecadiene, which are indicators of electron beam-irradiation in chemical methods by gas chromatography/mass spectrometry(GC/MS) method, were detected in all three samples. The levels of two irradiation indicators were increased by electron beam-irradiation in a dose-dependent manner. Furthermore, two irradiation indicators also were detected in all samples in 6 and 12 months after irradiation, though levels of those were decreased in a time-dependent manner. These results mean that the quantification of 8-heptadecene and 1,7-hexadecadiene could determine whether electron beam were irradiated or non-irradiated until 12 month after irradiation in 3 fat-rich agricultural products including soybean, walnut, and sesame.

• 방사선산업학회지
• /
• 제6권2호
• /
• pp.159-164
• /
• 2012

Bacterial cellulose (BC) is generated from citrus gel by Gluconacetobacter hansenii TL-2C. BC has good properties such as high-burst pressure, high-water contact and the ultrafine highly nanofibrous structure of mimic natural extracellular matrix (ECM) for tissue engineering. In this study, acrylic acid (AAc) was grafted onto BC surfaces under aqueous conditions using gamma-ray irradiation, and then immobilized gelatin onto AAc-g-BC. The characterization of scaffolds was performed by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), toluidine blue O (TBO) assay. Morphology of gelatin and AAc incorporation onto BC nanofibers did not changed. Our study suggests that gelatin-immobilized BC nanofibers scaffold has a potentiality to fabricate 3D nanofibrous scaffolds for tissue engineering.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.371-376
• /
• 2011

The surface property of the materials used in tissue engineering application has been essential to regulate cellular behaviors by directing their adhesion on the materials. To modulate surface property of the synthetic biodegradable materials, a variety of surface modification techniques have used to introduced surface functional groups or bioactive molecules, recently polydopamine coating method have been introduce as a facile modification method which can be coated on various materials such as polymers, metals, and ceramics regardless of their surface property. However, there are no reports about the degree of polydopamine coating on the materials with different hydrophilicity. In the present study, we prepared acrylic acid grafted nanofibrous meshes using electron-beam irradiation, and then coated meshes with polydopamine. Polydopamine successfully coated on the all meshes, both properties of acrylic acid and polydopamine were detected on the meshes. In addition, the degree of polydopamine deposition on the materials has been altered according to surface hydrophilicity, which was approximately 8-times greater than those on the non-modified materials. In conclusion, dual effect from the acrylic acid grafting and polydopamine may give a chance as a alternative tool in tissue engineering application.

• 방사선산업학회지
• /
• 제9권4호
• /
• pp.199-207
• /
• 2015

Typical radiation cross-linked hydrogels has the characteristic that high water content, but low emission efficiency of active ingredients. Therefore, the hydrogel was prepared by the addition to collagen, which is closely related to the formation of skin wrinkles in biocompatibility and highly water-soluble carboxymethyl cellulose sodium salt (CMC) in order to preparation of hydrogels has excellent emission efficiency of active ingredients. Hydrogels were prepared by dissolving CMC and collagen each of 0.5%, 10% concentration in deionized water. Then, prepared hydrogels are performed by gamma-radiation at 1, 3, 5 kGy irradiation dose. The results showed that the gel fraction of after irradiated 3 kGy hydrogel was higher than before irradiated gelation as long as the 55.3%. The swelling rate of irradiated 3 kGy hydrogel was lower than the non-irradiated sample. The compressive strength of 3 kGy irradiated hydrogel was the highest. The visco-elastic did not show any significant differences, even after irradiation. The CMC hydrogel in this study suggested a potential use as a material for the mask pack for improved emission efficiency of the active ingredient and anti-wrinkles.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.365-370
• /
• 2011

Electrospun nanofibers prepared with synthetic biodegradable polymer have some limitations in regulating adhesion, proliferation, and spreading of cells because of their surface hydrophobicity and absence of cell-interaction. In this study, we functionalized the electrospun poly(L-lactide-co-${\varepsilon}$-caprolactone) (PLCL) nanofibers with acrylic acid (AAc) to modulate their surface hydrophilicity using electron-beam irradiation method and then measured grafting ratio of AAc, water contact angle, and ATR-FTIR of AAc-grafted nanofibers. A grafting ratio of AAc on the nanofibers was increased as irradiation dose and AAc concentration were increased. AAc-grafted nanofibers also have higher wettability than non-modified nanofibers. In conclusion, those surface-modified nanofibers may be an essential candidate to regulate cell attachment in tissue engineering applications.

• 방사선산업학회지
• /
• 제6권3호
• /
• pp.239-244
• /
• 2012

This study was conducted to investigate bacterial growth, viscosity, color, and sensory properties of gamma-irradiated Tarakjuk powder, a Korean milk porridge powder, at 1, 3, 5, 7, and 10 kGy. The total aerobic bacteria in non-irradiated Tarakjuk powder was $2.56{\log}\;CFU{\cdot}g^{-1}$, whereas it was not observed within the detection limit of $2{\log}\;CFU{\cdot}g^{-1}$ in samples irradiated at more than 1 kGy. Spore-forming bacteria, however, were not observed in all samples within the detection limit of $1{\log}\;CFU{\cdot}g^{-1}$. The viscosity of rehydrated Tarakjuk after gamma irradiation significantly decreased from 16,770 cP to 4,060 cP when irradiated at 10 kGy. The redness ($a^*$ value) and yellowness ($b^*$ value) evaluated using a colorimeter were significantly increased according to the increase in irradiation dose (p<0.05), while there was no difference in color evaluation conducted by panels. The overall acceptance decreased as the irradiation dose increased, and the 5 kGy sample was 4.0 (normal) on a 7-point scale. As a result, it is considered that a gamma irradiation of 5 kGy is enough to sterilize Tarakjuk powder with a acceptable sensory quality.

• 방사선산업학회지
• /
• 제5권2호
• /
• pp.119-124
• /
• 2011

Silver nano-particles (AgNPs) have attracted much attention for centuries due to their unique optical properties, electrical conductivities, oxidative catalysis, and antibacterial effect. In this study, AgNPs have been prepared by using aqueous $AgNO_3$ solution in the poly(vinyl alcohol) (PVA)/poly(ethylene glycol) (PEG) hydrogels. PVA and PEG powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make hydrogels. PVA/PEG hydrogels were dipped into $1.0{\times}10^{-2}M$ $AgNO_3$ solution for 1 hour. After that, the swollen hydrogels were irradiated by gamma-ray for the formation of AgNPs. FE-SEM is used to observe the formation of AgNPs as a function of the content of PEG and the irradiation dose. Also, AgNPs in the PVA/PEG hydrogels were monitored by UV-Vis. It is observed that the content of PEG and gamma-ray irradiation in the hydrogel is crucial to the formation of AgNPs. Finally, antibacterial tests indiacted that the hydrogel containing silver nanoparticle has antibacterial activity.