• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2046-2052
• /
• 2008

For the lighting of vehicles structural casting components of aluminum casting alloys are substituted for those of steel or iron. For the manufacturing of large-scale premium quality aluminum castings the developments of a new casting process and a heat treatment process are necessary. The optimum casting design and heat treatment condition for large-scale castings are drawn with the help of Z-Cast software for the casting process analysis in this study. Low pressure sand casting method is applied successfully to produce air bag support components of D357 aluminum casting alloy.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.495-498
• /
• 2008

PCC(Point of Common Coupling) is measured by waveform in power system. Analyzing their frequency, it is possible to get various indices such as THD(Total Harmonic Distortion), TDD(Total Demand Distortion), and VF(Voltage Flicker), and then the harmonic can be evaluated from them. In this paper, the harmonic effect on the power supply which is generated by the vehicle is presented by comparing harmonics with the substation and the vehicle.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.338-348
• /
• 1998

The study was carried out about the design and the performance study of brake system for Korean High Speed Train of maximum operating speed of 350km/h. The brake system was studied to two parts the function of brake system and the performance of brake system base on Korean-TGV. According to the simulation of brake system, the train should be provided the eddy current brake system for maximum operating speed of 350km/h. The eddy current brake system take charge of about 31% on normal condition and about 22% on emergency by condition. The performance study of brake system would be continued for definition of adhesion factor un friction factor assumed to analysis and simulation.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.381-386
• /
• 2004

In order to develop a high speed train, various conditions have been considered. Internal noise level of cabins is an important one. In this study, The specification of the interior noise level for KHST(Korean High Speed Train) has been adopted the same level of KTX-spec. In this paper, the interior noise levels of KHST are measured and analysed through the speed and other conditions. According to the speed, the level of internal noise(driver's room(PC2), motorized trailer(TM1) and trailer car(TT2)) is compared. The results of measuring data show that the interior noise levels of KHST are good. And noise levels of this paper are useful in the decision of noise specification.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1449-1454
• /
• 2004

For the research, we developed the hardware and software of the measurement system for on-line test and evaluation. The software controls the hardware of the measurement data and acts as a interface between users and the system hardware. In this paper, we studied performances of the auxiliary block for high-speed railway vehicle. In order to performance these works, the conversion system was developed. Using this system, we obtained the important results, such as voltage values for the battery charger and auxiliary block. Also, we diagnosed the faults and performed the evaluation for auxiliary block using the measurement system and data.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.349-358
• /
• 1998

This study was carried out about the design and the performance study of propulsion system for Korean High Speed Train of maximum operating speed of 350km/h. The propulsion system was studied to two parts the formation of power transmission and the performance of traction system base on Korean-TGV. For maximum operating speed of 350km/h at Seoul-Pusan high speed line, the power of train should be have the remaining acceleration of 0.058m/s/s and the slopeability of 6%o. This performance study of propulsion system would be continued for defining of adhesion factor, friction factor and aerodynamic factor assumed to analysis and simulation.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.686-693
• /
• 2003

An intensive study was conducted for crashworthiness structural design of recently developed Korean High Speed Train. Two nam design concepts are setup to protect the both crews and passengers from serious injury at heavy collision accidents, and to reduce damages of the train itself at light collision accidents. For occupant protection a collision against a movable 15 tons rigid obstacle at 110 kph and a train-to-train collision at 30 kph were selected as accident scenarios for the heavy collisions based on the train accident investigations. A train-to-train collision at 8 kph was used for the light collisions. The crashworthiness behaviors of KHST have been evaluated numerically using the finite element method. Also, one-dimensional collision analyses show good crashworthy responses in a full rake consist and 3-dimensional shell element analyses do in the front-end structures of the power car. Occupant analyses and sled tests demonstrated that KHST performs well enough to protect occupants under the considered accident scenarios.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.554-560
• /
• 2003

The transmission systems of high speed train serve in the severe condition compared with those of other trains, namely, they have to transmit high power to run with high speed and they have to make maximum use of the limited space. To clarify the capability of reduction gear unit for Korea High Speed Train, torque and temperature, vibration on the reduction gear unit were measured and test data were analyzed. This paper reports test methods and test results that performed to verify reliability of reduction gear unit during running test of Korea High Speed Train. It is confirmed from these results that the performance of reduction gear unit has not any problem.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.561-566
• /
• 2003

Research and development project for the gearboxes of Korea High Speed Train is being run as one of the 'G7 Project' to achieve the Technical Independency in the area for the High Speed - High Load Gearboxes. Executing this project we domesticate the technologies for Design, Analysis, Manufacturing and Testing. Acquired high-technologies can be applied not only to the Rolling Stocks, but also to other Industrial Areas including the Cars and Aerovehicles. The prototypes had been tested on the roller rig and are being tested on the railway.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.724-729
• /
• 2003

The prototype of Korean high speed train (KHST), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested by the domestic researchers. In this paper, the body vibration has been reviewed from the viewpoint of the vehicle's safety and the vibration limits for components and sub-assemblies mounted on the car-body using by the experimental method. The on-line test of KHST has been carried out up to 260 km/h in the KTX line and proved that KHST has no problems in the vehicle's safety and the vibration limits at this speed. And the characteristics of body vibrations has been predicted at 300 km/h and 350 km/h by fitting curve about the measured acceleration signals.