• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.11-18
• /
• 1984

There are two different methods in the stability analysis of slopes depending upon the 1ocations and the types of assumed failure planes, which are the infinite slope analysis and the finite slope analysis. The infinite slope analysis is simple and easier in its application. However, since the method neglects the end effects and assumes the failure plane to be located at the shallow depth and parallel to the slope, the slopes to be analyzed by the method should be limited to a certain range. Thus, it is intended in this paper to define the infinite slopes whose stability may be analyzed by the infinite slope analysis. As a result, it is obtained that the method of infinite slope analysis may be applied to the slopes which have the ratio of the slope height to the depth of the failure plane of 9 or bigger.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.519-519
• /
• 2017

우리나라는 국토의 65%가 산악지형으로서 유역경사가 급한 특성으로 인해, 강우발생 시 유하시간의 감소로 인한 홍수피해와 도시화와 산업화로 인한 수질오염에 매우 취약한 실정이다. 수질관리의 일환으로 환경부에서는 '4대강 물관리종합대책'과 '물환경관리 기본계획' 등을 발표하며, 유역단위의 통합적 물관리를 실시하고 있다. 물환경관리 기본계획의 단위유역 단위의 목표수질 달성을 위한 중요 정책적 실행수단으로서 수질오염총량제가 있으며, 관리대상 오염물질로서는 BOD, T-P만을 대상으로 하고 있다. 하지만 최근 환경부에서는 기존 BOD 중심의 유기물질 관리의 한계 극복과 환경기준 선진화의 일환으로서 수질 목표기준에 TOC를 설정하고 생활환경 기준에 질소의 도입을 추진하는 등의 경향을 볼 때, BOD와 T-P 중심의 목표수질 관리에는 한계가 있다고 판단되며, 이에 따라 현행 관리 대상물질 외 수질항목에 대한 다양한 분석방법이 필요하다. 본 연구에서는 청미천 본류의 환경부 물환경측정망 운영지점과 8개의 지류에 대해 2013년 6월부터 2015년 7월까지 8일 간격 수질 유량 자료에 대한 현장측정 자료를 이용하여 BOD, COD, SS 등 총 6개 수질항목에 대하여 FDC(Flow Duration Curve)와 초과율(Exceedance Rate) 분석을 실시하였다. 분석 결과를 바탕으로 각 지류에서 발생한 오염물질의 농도가 청미천 본류의 분류된 구간과 청미A 단위유역 말단에 미치는 영향에 대하여 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.241-250
• /
• 2011

The new gerotor developed in this paper has an inner rotor in which a circular arc is inserted between the hypocycloid and epicycloid curves, whereas the outer rotor is designed using the simulation results for the rotor and a modification method. The new gerotor has no cusps and loops and no limit on the eccentricity. We increase the average flow rate by adding a new design parameter, $\gamma$, which is the inclined angle of the inner rotor at the intersection of the hypocycloid and the circular arc. A calculation method to calculate the chamber area is also developed. This method can also be used to calculate the flow rate and flow rate irregularity when the contact points are unknown. The control of eccentricity and $\gamma$ is expected to lead to an efficient rotor.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.69-78
• /
• 2010

The hydrological-geomorphic character is closely related with runoff in basin. A development of GIS greatly helps investigating about mechanism between theirs. We analyze local slope and hillslope length which are related with hydrological response. But variation of these geomorphic variables has very wide range at each pixel. So there's a limit as to use directly. Therefore we investigate a relation between hydrological response and distributed geomorphic variables according to statistical character of distributed map considering spatial correlation. As a result, the local slope affects peak discharge, and the hillslope length affects peak discharge and time, mean and variance of hydrological response. Henceforth these hydrological-geomorphic analyze methods can be improved that hydrology response is directly analogized with DEM data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.402-402
• /
• 2020

대청호는 1998년 조류경보제 도입 이후 1999년과 2014년을 제외하고 매년 조류 경보가 발령되었으며 2001년 조류 경보 '대발생'이 발령된 후 2017년 가장 높은 조류 발생 수치를 기록하였다. 상시 조류 발생 지역인 대청호 내 녹조를 제어하기 위해 비점오염원 발생원을 기준으로 우선관리지역을 선정하고, 각 지역의 특성을 반영한 관리대책을 제안하였다. 우선관리지역 선정을 위해 대청호 유역 내 오염총량 소유역을 기준으로 각 소유역의 농업 비점오염원의 발생부하량을 산정하고 유출을 고려한 가중치를 추가하였다. 본 연구에서는 농업 비점오염원을 크게 토지계 비점오염원과 축산계 비점오염원으로 분류하였으며, 토지계 농업비점오염원은 논, 밭, 과수원 지역으로 정의하였다. 발생부하량의 산정은 오염총량관리 기술지침(2019, 국립환경과학원)을 기준으로 하였으며, 토지계 발생부하량 산정을 위한 토지계 정보원으로 환경부에서 제작 및 배포하는 세분류 토지피복도를 축산계 발생부하량 산정을 위한 축산 두수는 2017년 기준 전국오염원조사 내 축산두수를 이용하였다. 토지계 비점오염원의 하천까지 유출을 반영하기 위해 각 소유역별 평균 경사도를 가중치로 이용하였으며, 축산계 비점오염원은 오염물질이 발생한 후 하천까지의 평균 유출 정도를 확인하여 가중치로 반영하였다. 실제 하천에 미치는 영향이 높은 지역에 대한 우선적인 관리를 위해 하천수 수질측정망에서 측정한 수질 데이터와의 비교를 통하여 최종 우선관리지역을 보청A03, 보청A05, 금본F14, 금본F22 소유역으로 선정하였다. 각 소유역에 대한 수질 관리목표를 확인하였으며, 지역의 특성을 분석하여 토지계 및 축산계 비점오염원에 대한 적절한 관리대책을 제안하였다. 본 연구에서 사용한 수질 측정망 데이터가 각 소유역보다 적게 분포하여 소유역에서 발생한 비점오염물질이 하천에 미치는 영향을 직접 파악하는데 한계가 있었다. 또한, 축산계의 경우 발생한 비점오염물질이 모두 하천으로 유입되지 않으며, 축산계 비점오염원의 배출경로를 파악하는데 어려움이 있다는 한계를 가진다. 본 연구의 한계를 바탕으로 농림축산식품부 및 축협 등에서 구축하는 사육두수의 데이터를 이용하는 방법론 등의 추가적인 연구가 필요할 것으로 보인다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.183-193
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal fetid. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about $60^{\circ}$in the northern part and $83^{\circ}$in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9 MPa and that of weak sandstone was 10 MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north(east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30~$36^{\circ}$for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described abode. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures. the stability of 니ope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.

• Journal of Korea Water Resources Association
• /
• v.44 no.10
• /
• pp.819-830
• /
• 2011

The multi-slope MUSCL, proposed by T. Buffard and S. Clain, determines slopes of conserved variables at each edge of a cell in the linear reconstructions of data. In this study, the second order accurate numerical model was developed according to the multi-slope MUSCL to solve the shallow water equations on the unstructured grids. The HLLL scheme of approximate Riemann solvers was used to calculate fluxes. For the review of the applicability of the developed model, the results of the model were compared to the 'isolated building test' and the 'model city flooding experiment' conducted as part of the IMPACT (Investigation of extreMe flood Processes And unCerTainty) project in Europe. There were limitations to predict abrupt rising of water depths by the resistance of model buildings and water depths at the specific locations among the buildings. But they were identified as the same problems also revealed in results of the other models to the same experiment. On the more refined meshes to the 'model city flooding experiment' simulated results showed good agreement with measurements. It was verified that the developed model simulated well the complex phenomena such as a dam-break problem and the urban inundation by flash floods.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.573-586
• /
• 2023

Joints or weak planes can induce anisotropy in the strength and deformability of fractured rock masses. Comprehending this anisotropic behavior is crucial to engineering geology. This study used plaster as a friction material to mold specimens with a single joint. The strength and deformability of the specimens were measured in true triaxial compression tests. The measured results were compared with three-dimensional numerical analysis based on the distinct element method, conducted under identical conditions, to assess the reliability of the modeled values. The numerical results highlight that the principal stress conditions in the field, in conjunction with joint orientations, are crucial factors to the study of the strength and deformability of fractured rock masses. The strength of a transversely isotropic rock mass derived numerically considering changes in the dip angle of the joint notably increases as the intermediate principal stress increases. This increment varies depending on the dip of the joint. Moreover, the interplay between the dip direction of the joint and the two horizontal principal stress directions dictates the strength of the transversely isotropic rock mass. For a rock mass with two joint sets, the set with the steeper dip angle governs the overall strength. If a rock bridge effect occurs owing to the limited continuity of one of the joint sets, the orientation of the set with longer continuity dominates the strength of the entire rock mass. Although conventional three-dimensional failure criteria for fractured rock masses have limited applicability in the field, supplementing them with numerical analysis proves highly beneficial.

• Korean Journal of Environment and Ecology
• /
• v.25 no.6
• /
• pp.819-827
• /
• 2011

Climate change is recognised as the best serious environmental problem in recent time, and high alpine or high latitudinal organisms especially endangered by its change. Leontice microrhyncha is recorded one of the endangered species by the Ministry of Environment Korea. We surveyed ten L. microrhyncha populations distributed at Taebaek Mountains, high mountain area in Kangwon province. L. microrhyncha is distributed 940m~1350m high altitude which equivalent of Warmth Index $53^{\circ}C{\cdot}month$ to $75^{\circ}C{\cdot}month$, the range of conspicuous cool temperate forest zone. The plant species distributed at slope of $5^{\circ}{\sim}23^{\circ}$ on northeast slopes. The vegetation structure at tree layer of L. microrhyncha distribution area is dominated by Quercus mongolica, Betula costata, Cornus controversa, Acer mono in tree layer, and by Staphylea bumalda, Deutzia glabrata, Stephanandra incisa in shrub layer. The species diversity of herb layer of each L. microrhyncha population showed from 0.21 to 0.98, and the importance value of L. microrhyncha in each population was the highest at blooming time of L. microrhyncha. These results will provide the basic information for the development of conservation strategies for this endangered species.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.430-440
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal field. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about 60$^{\circ}$ in the northern part and 83$^{\circ}$ in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9MPa and that of weak sandstone was 10MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north (east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30∼36$^{\circ}$ for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described above. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures, the stability of slope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.