• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.46-51
• /
• 2007

The irregular fuel surface was observed by the visualization of hybrid rocket combustion. Even though the test condition maintained oxidizer rich environment, the irregular dark fuel surface was formed as the result of incomplete combustion. In order to investigate the correlation of the characteristics of oxidizer flow and the irregular fuel surface, various flow conditions were imposed such as swirl flow, induced swirl flow by helical fuel configuration and straight flow. Test results revealed no correlation was found between oxidizer flow condition and irregular fuel surface. And this can be a commonly observed phenomena in the tests with different fuel/oxidizer combination. Thus, the irregular fuel surface can be a result of the interaction of blowing flow of vaporized fuel and the boundary layer of oxidizer flow. A further study will be required to confirm the assumption for the formation of irregular fuel surface.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.73-79
• /
• 2015

Enhanced bandwidths of the GPS microstrip patch antennas applied by a Wilkinson power divider and a quadrature hybrid were compared. The square patch was designed, and fed by the two port probes for the circuit application. The Wilkinson power divider and quadrature hybrid circuit were designed, and applied to the patch antenna. The designed patch and two circuits were implemented on the FR4 board, and combined together. The measurement of the bandwidth within a voltage standing wave ratio (VSWR) of 2: 1 were 36.5% (1,200~1,775 MHz) in the case of the Wilkinson power divider and 29.84% (1,230~1,700 MHz) in the case of the quadrature hybrid. Axial ratios (AR) in 3dB were 17.14% bandwidth (1,360~1,630 MHz) and 15.87% bandwidth (1,400~1,650 MHz), respectively. The application of the Wilkinson power divider is wider than that of the quadrature hybrid. The peak gains in the anechoic chamber at the GPS center frequency were measured as 2.84 dBi and 2.75 dBi, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.458-466
• /
• 2020

The purpose of this experimental research is to evaluate the compressive and tensile behaviors of high performance hybrid fiber reinforced concrete(HPHFRC) using amorphous steel fiber(ASF) and polyamide fiber(PAF). For this purpose, the HPHFRCs using ASF and PAF were made according to their total volume fraction of 1.0% for target compressive strength of 40MPa and 60MPa, respectively. And then the compressive and tensile behaviors such as the compressive strength, compressive toughness, direct tensile strength, and stress-strain characteristics under compressive and tensile tests were estimated. It was observed from the test results that the compressive strength of HPHFRC was slightly decreased than that of plain concrete, but the compressive toughness, compressive toughness ratio, and direct tensile strength of HPHFRC increased significantly. Also, it was revealed that the plain concrete showed brittle fracture after the maximum stress from the stress-strain curves, but HPHFRC showed strain softening.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.613-619
• /
• 2020

Hybrid media access control (MAC) is used in internet of things (IoT) network, because of communication feature concern with data capacity and communication interval between gateway and sensor nodes and the cost efficiency. Hybrid MAC consists of TDMA and CSMA generally. The distance between gateway and sensor node is openly changed in marine IoT network. Therefore, it is needed to control the period of timeslot of hybrid MAC used in marine IoT network. In this paper, the design rule of TDMA timeslot with the variable period depending on communication distance was proposed. It was confirmed from the analysis that 72 times communication between gateway and sensor nodes is possible in LoRa network by using the proposed TDMA variable timeslot scheme.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.79-88
• /
• 2022

The purpose of this study was to explore which factors should be considered mainly in operating hybrid learning in which offline and synchronous online environments are integrated in elementary education. Using qualitative data through interview and so on for 8 elementary school teachers with experience in operating hybrid learning, major consideration factors were identified. Before class, it is necessary to increase the level of understanding through concrete guidance or education for what the characteristics of hybrid learning are. The redesign of the environment including hardware and software technology is considered because the foundation was not established properly so that effective operation was difficult. In particular, based on the simultaneity and interactivity between the environments, activities which learners can connect and participate in the two environments should be considered. Further, design strategies to guide the operation of teaching and learning will be developed.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.608-612
• /
• 2023

Nano-diamond (ND) was added during the carbon block preparation process to increase the thermal conductivity of the carbon block. Added ND controlled the generated pore of carbon block due to the volatilization of the binder pitch during the carbonization process. The ND was added to the kneading process of coke and binder pitch, and carbon blocks were prepared by pressing and carbonization. As the amount of added ND increased, the ND ratio of the carbon block increased. The added ND made a pass-way for generated gas by volatilizing the binder pitch during the carbonization process, increasing the density of the carbon block and reducing the porosity. The thermal conductivity of the carbon block was improved by increased density, lowered porosity, and the high thermal conductivity of added ND.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.05a
• /
• pp.63-64
• /
• 2001

• Electrical & Electronic Materials
• /
• v.28 no.5
• /
• pp.3-9
• /
• 2015

• Magazine of the Korea Concrete Institute
• /
• v.18 no.1 s.90
• /
• pp.22-27
• /
• 2006

• 한국전기화학회:학술대회논문집
• /
• 1999.10a
• /
• pp.62-62
• /
• 1999