• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.499-506
• /
• 2019

This paper is concerned with the operating stability of 7kW inverter using SIC hybrid module and verifies the validity of the simulation results by comparing the result of the loss equation and the simulation result, Simulation results using Si module and SiC hybrid module are compared to compare switch loss and diode loss. Through the loss equation calculation, the conduction loss of SiC Hybrid module is 168W, switching loss is 9.3W, diode loss is 10.5nW, When compared with the simulation results, similar values were shown. As a result of comparing the simulation results of the Si module and the SiC Hybrid module, The total device loss of the Si module was 246.2W, and the total device loss of the SiC Hybrid module was 189.9W. The loss difference was 56.3W, which was about 0.8W. thereby verifying the reverse recovery characteristics of the SiC SBD. In addition, temperature saturation test was conducted to confirm the stability of SiC Hybrid module and Si module under high temperature saturation, In the case of the Si module, the output power was stopped at 4kW, and the SiC Hybrid module was confirmed to operate at 7kW. Based on this, an efficiency graph and a temperature graph are presented, and the Si module is graphed up to 4kW and the SiC Hybrid module is graphed up to 7kW.

• Journal of Wetlands Research
• /
• v.23 no.3
• /
• pp.242-251
• /
• 2021

Surface water pollution is a serious environmental problem in developing countries, like India, due to the unregulated discharge of untreated wastewater. To overcome this, the constructed wetlands (CWs) have been proven to be an efficient technology for wastewater treatment. In this study, different existing and experimental facilities were reviewed to be able to determine the current status of constructed wetlands in India. Based on the collected data from published literature, industrial wastewater contained the highest average chemical oxygen demand (COD), biochemical oxygen demand (BOD). In terms of total nitrogen (TN), Total phosphorous (TP), the lowest concentration was found on domestic wastewater. Vertical flow constructed wetlands (VFCW) and Horizontal flow constructed wetland (HFCW) were more effective in removing TSS, BOD, TP in domestic and industrial wastewater, whereas hybrid constructed wetlands (HCW) showed the highest removal for COD. The use of constructed wetlands as advanced wastewater treatment facilities in India yielded better water quality. The treatment of wastewater using constructed wetlands also enabled further reuse of wastewater for irrigation and other agricultural purposes. Overall, this study can be beneficial in evaluating and promoting the use of constructed wetlands in India.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.885-892
• /
• 2018

Molybdenum disulfide ($MoS_2$) based electrocatalysts have been proposed as substitutes for platinum group metal (PGM) based electrocatalyst to hydrogen evolution reaction (HER) in water electrolysis. Here, we studied $MoS_2/CNFs$ hybrid catalyst prepared by electrospinning method with heat treatment for polymer electrolyte membrane(PEM) water electrolysis to improve the HER activity. The physicochemical and electrochemical properties such as average diameter, crystalline properties, electrocatalitic activity for HER of synthesized $MoS_2/CNFs$ were investigated by the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Raman Spectroscopy (Raman) and Linear Sweep Voltammetry (LSV). The as spun ATTM/PVP nanofibers were prepared by sol-gel and electrospinning method. Subsequently, the $MoS_2/CNFs$ was dereived from reduction heat treatment of ATTM at the ATTM/PVP nanofibers and carbonization heat treatment. Synthesized $MoS_2/CNFs$ electrocatalyst had an average diameter of $179{\pm}30nm$. We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ electrocatalyst consist of 3~4 layers from the Raman results. In addition, We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ catalyst consist of 7.47% octahedral 1T phase $MoS_2$, 63.77% trigonal prismatic 2H phase $MoS_2$ with 28.75% $MoO_3$ through the XRD, Raman and XPS results. It was shown that $MoS_2/CNFs$ had the overpotential of 0.278 V at $10mA/cm^2$ and tafel slope of 74.8 mV/dec in 0.5 M sulfuric acid ($H_2SO_4$) electrolyte.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.4
• /
• pp.93-114
• /
• 2022

This study aims to propose the ways to improve the research performance evaluation to support the establishment of a sound research culture. For the study, we analyzed the cases of domestic and foreign research performance evaluation, and a survey and an interview were conducted for faculty and research performance evaluation officials, respectively. In the study, the direction of establishing the principle of research performance evaluation, the method of categorizing the type of research performance, the method and procedure of research performance evaluation, and necessary documents were proposed. First, eight principles were suggested to be considered in evaluating research achievements to ensure the validity, reliability, and transparency of the evaluation while supplementing the limitations of quantitative evaluation. Second, the main types of research achievements were categorized into journal articles, books, and presentations at academic conferences. Third, as a research achievement evaluation method, a hybrid evaluation using quantitative and qualitative and multiple measurement indicators was proposed. Fourth, a total of 11 steps (required 7 steps) were presented as a procedure for research achievement evaluation. Fifth, publications, evaluation documents, and committee chair's reports were proposed as major documents for research achievement evaluation. The research achievement evaluation improvement plan presented in this study should be flexibly applied in consideration of the characteristics of the academic and research fields and universities.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.639-646
• /
• 2022

Energy harvesting technologies that can convert wasted various energy into usable electrical energy have been widely investigated to overcome the limitation of batteries for the powering of IoT sensors and small electronic devices. Hybrid energy harvesting is known as a technology that enhances the output power of single energy harvesting device by housing two or more various energy harvesting mechanisms. In this study, we introduce a hybrid MME (Magneto-Mechano-Electric) generator coupled with the triboelectric effect. Through FEA modeling, four triboelectric materials, including PI (Polyimide), PFA(Teflon), Cu, and Al, were selected and compared with the expected triboelectric potentials. The effect of surface morphology was investigated as well. Among various combination of triboelectric materials and surface morphologies, PFA-Al combination with the surface morphology having nano-scale square projections showed highest output potential under triboelectrification. It is also experimentally confirmed that output voltage and power of the hybrid MME generator with triboelectric material combinations.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.2
• /
• pp.285-298
• /
• 2022

This study is to investigate the effects and characteristics of science and engineering integrated lessons on elementary students' creative engineering problem solving propensity (CEPSP). The science and engineering integrated lessons used in this study was a 10 lesson-hours STEM program, co-developed by University of Minnesota and Purdue University. The program was implemented in the 6th grade science class of H Elementary School located in P Metropolitan city. The main data of this study are the pre-post CEPSP result and interview with 5 students collected before and after the research. The CEPSP result was analyzed by a paired-sample t-test and hierarchical cluster analysis. As a result of the t-test, it was found that overall, the program has a positive effect on the students' CEPSP score. As a result of cluster analysis, it was confirmed that studnets' CEPSP could be classified into two groups (lower and higher score cluster). Five students whose, CEPSP score has significantly improved after the lessons were interviewed to find out what the characteristics of the program that contribute the significant change are. As a result of conducting centroid analysis of the interview transcription and the hybrid analysis method, it was found that the meaningful experiences that the five students commonly shared were 'problem solving through collaboration' and 'through repeated experiments (redesign)', problem solving' and 'utilization of scientific knowledge'. As minor reactions, 'choice of the best experimental method' and 'difference between science and engineering' appeared.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.211-221
• /
• 2023

This study presents a comprehensive study on the synthesis and characterization of PVI-PGMA/LiTFSI polymeric membrane electrolytes and CxNy-C flexible electrodes for energy storage applications. The dual-functional PVI-PGMA copolymer exhibited excellent ionic conductivity, with the PVI-PGMA73/LiTFSI200 membrane electrolyte achieving the highest conductivity of 1.0 × 10^-3 S cm^-1. The electrochemical performance of the CxNy-C electrodes was systematically investigated, with C3N2-C demonstrating superior performance, achieving the highest specific capacitance of 958 F g^-1 and lowest charge transfer resistance (R_ct) due to its highly interconnected hybrid structure comprising nanowires and polyhedrons, along with binary Co/Ni oxides, which provided abundant redox-active sites and facilitated ion diffusion. The presence of a graphitic carbon shell further contributed to the enhanced electrochemical stability during charge-discharge cycles. These results highlight the potential of PVI-PGMA/LiTFSI polymeric membrane electrolytes and CxNy-C electrodes for advanced energy storage devices, such as supercapacitors and lithium-ion batteries, paving the way for further advancements in sustainable and high-performance energy storage technologies.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.463-475
• /
• 2016

As the transition to the digital age in the late 20th century, the intrinsic value of the craft, the emotional values of human, has been noticed as an alternative to overcome the adverse effects of the modernism of the industrial age. To introduce experimental tries which convergence of contemporary technologies and elements of traditional craft, and to inspire artists and present the new possibility of creation to them who want to take advantage of craft emotion as the elements of creation is the purpose of this study in the current digital technology age. First, the meaning and value of craft in modern times and digital media and hybrid creation environments are theoretically investigated based on previous studies and literature. Second, design cases produced by combining digital technology as a tool and craft elements are classified for substantial understanding of the design. Thirdly, identify the design characteristics presented through case studies and suggest the new possibility of creation. The results of the study are as follows. Reject typical types highlight the functional role and try free express conversion, e.g. form, material, texture, making process etc. Extracts the various elements that can be applied and search combining ways, because the convergence of digital technology and the craft is sufficient to activate the human emotion. Interaction between the craft and the digital medium is made actively. Craft accepts digital form, the craft appeared again as the contents of the digital. the traditional and digital method appropriately fused and utilized depending on the situation in process.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.456-462
• /
• 2023

An electrically conductive and transparent electrode was created by applying a dispersion of pristine single-walled carbon nanotubes (SWCNTs) and silver nanowires to a polyethylene terephthalate (PET) film using a bar coating method. The SWCNTs were added to increase the electrical conductivity and transmittance of the silver nanowires while also preventing the haze from increasing due to the stacking of multiple layers containing SWCNTs and silver nanowires on the PET substrate. The silver nanowires in the electrode were also found to be stable against oxidation. The transparent electrode displayed excellent electrical and optical properties, with a sheet resistance of 47 Ω/□, transmittance of 96.72%, and haze of 1.93%. Additionally, the sheet resistance of the electrode remained stable over time, with a change of only 6.4% after a constant temperature and humidity test, making it suitable for long-term use. A hybrid transparent electrode that is economically feasible and environmentally sustainable has been developed through the utilization of pristine SWCNT and silver nanowire.