• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.393-400
• /
• 2010

현재까지 USN(Ubiquitous Sensor Network)이라 통칭되어지는 센서망은 불특정 공간에 배포된 무선방식의 센서노드를 통해 유선방식의 센서 인프라를 대체하려는 기술 지향적 및 공급자중심의 구성을 가지고 있다. 본 논문은 기존의 공급자 위주의 기술지향적인 제한적 구성에서 벗어나, u-City에서 제공하고자 하는 서비스들의 목적과 서비스 대상의 요구사항분석을 기반으로 성능, 품질, 비용 등을 고려하도록 다양한 기술들을 융 복합하여 서비스를 제공하는 하이브리드 센서망의 제안을 위한 선행 연구 결과이다. 우선, 센서망과 u-City 서비스와의 관계에 대해 서술한 후, 기존 센서망에 대한 조사, 분석 결과 및 문제점, 그리고 선진국에서의 하이브리드 센서망 적용 사례와 시사점에 대해 논의하도록 한다.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.67-73
• /
• 2012

In this paper, in order to overcome the disadvantage of wireless-based sensor network, a hybrid sensor network using wired and wireless linkage is proposed. Proposed a wired and wireless linkage hybrid sensor network can compensate the defect of poor transmission at the indoor wireless environment, and can be free from interference between a wireless LAN and Bluetooth of the same frequency bandwidth due to an attribute of low-loss transmission at the CATV network. Also, proposed a wired and wireless linkage hybrid sensor network make use of CATV network which is well-built infrastructure, is more efficient to design network, assure a stability and high reliability of the sensor network as providing a stability for an inaccuracy and a predictable transmission link for the existing wireless network.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.33-40
• /
• 2020

Various studies have been conducted on the structural health monitoring using optical fiber. Optical fibers can be used to measure multiple and distributed strain. Among the optical fiber sensors, FBG sensor has advantages of dynamic response measurement and high precision, but the number of measurement points is limited. Distributed fiber sensors, represented by distributed Brillouin sensors, usually have more than 1000 measurement points, but the low sampling rate makes dynamic measurements impossible. In this study, a hybrid nerve sensor system using only the advantages of the FBG sensor and the distributed Brillouin sensor has been proposed. Laboratory experiments were performed to verify the proposed system, and the accuracy and reproducibility were verified by comparing with commercial sensors. Applying the proposed system, dynamic response ambient measurements are used to evaluate the global state of the structure. When an abnormal condition is detected, the local condition of the structure is evaluated by static response measurement using the distributed measurement system. The proposed system can be used for efficient structural health monitoring.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.116-119
• /
• 2016

무선 센서 망에서 모바일 싱크 그룹에게 데이터를 전송하기 위한 Mobile Geocasting에 관한 연구가 진행되었다. Mobile Geocasting에서, 싱크 그룹의 지역에 싱크들에게 데이터를 전송하기 위해 유니캐스팅과 플러딩의 두 가지 접근 방식이 있다. 에너지 효율성의 관점에서, 유니캐스팅은 분산된 적은 수의 분산된 싱크들에게 효율적인 전송 방식이고, 반면에 플러딩은 다수의 밀집된 싱크들에게 효율적인 전송 방식이다. 하지만, 이 두 가지 방식은 모두 너무 극단적으로 보수적인 방법이기 때문에, 그룹 지역 내에 싱크들이 전체적으로는 분산적이지만 부분적으로는 밀집하게 분포된 일반적인 상황들을 지원하기는 어렵다. 그러므로, 본 논문은 일반적인 분포를 가지는 이동 싱크 그룹을 효율적으로 지원하기 위한 유니캐스팅과 플러딩을 통합하는 하이브리드 방안을 제안한다. 제안 방안은 그룹 지역내에 분산된 싱크들을 위해서는 개별적 유니캐스팅과 밀집된 싱크들에게는 부분적 플러딩을 이용한다. 부분적 플러딩 지역을 도출하기 위해, 제안 방안은 하나의 수학적 모델을 제시한다. 시뮬레이션 결과는 제안 방안이 기존의 방안들보다 에너지 소비 관점에서 더 효율적임을 증명한다.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.133-140
• /
• 2007

Currently, as the requirement for high quality Internet access from anywhere at anytime is consistently increasing, the interconnection of pure ad hoc networks to fixed IP networks becomes increasingly important. Such integrated network, referred to as hybrid ad hoc networks, can be extended to many applications, including Sensor Networks, Home Networks, Telematics, and so on. We focus on some data communication problems of hybrid ad hoc networks, such as broadcasting and routing. In particular. power failure of mobile terminals is the most important factor since it affects the overall network lifetime. We propose an energy-efficient routing protocol based on clustering for hybrid ad hoc networks. By applying the index-based data broadcasting and selective tuning methods, the infra system performs the major operations related to clustering and routing on behalf of ad hoc nodes. The proposed scheme reduces power consumption as well as the cost of path discovery and maintenance, and the delay required to configure the route.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2016

Current sensors are used widely in the fields of current control, monitoring, and measuring. They have become more popular with the increasing demand for smart grids in a power network, generation of renewable energy, electric cars, and hybrid cars. Although open loop Hall effect current sensors have merits, such as low cost, small size, and weight, they have low accuracy. This paper describes the design and fabrication of a 300A open loop current sensor that has high accuracy and temperature performance. The core of the current sensor was calculated numerically and the signal conditioning circuits were designed using circuit analysis software. The characteristics of the manufactured open loop current sensor of 300 A class was measured at currents up to 300 A. According to the test of the current sensor, the accuracy error and linearity error were 0.75% and 0.19%, respectively. When the temperature compensation was carried out with the relevant circuit, the temperature coefficients were less than $0.012%/^{\circ}C$ at temperatures between $-25^{\circ}C$ and $85^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1379-1386
• /
• 2005

For efficient welding it is necessary to maintain stability of the welding process and control the shape of the welding bead. The welding quality can be controlled by monitoring important parameters, such as, the Arc Voltage, Welding Current and Welding Speed during the welding process. Welding systems use either a vision sensor or an Arc sensor, both of which are unable to control these parameters directly. Therefore, it is difficult to obtain necessary bead geometry without automatically controlling the welding parameters through the sensors. In this paper we propose a novel approach using fuzzy logic and neural networks for improving welding qualify and maintaining the desired weld bead shape. Through experiments we demonstrate that the proposed system can be used for real welding processes. The results demonstrate that the system can efficiently estimate the weld bead shape and remove the welding detects.