• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.53-56
• /
• 2005

Hybrid rocket had many advantage with compared to solid and liquid rockets. In this study, swirl flow hybrid motor was designed and manufactured. And the methods of regression rate improvement wire considered. Thrust was calculated with pressure of the combustion chamber and the regression rate was measured in low flow rate of oxidizer. Several problems and solutions of operating hybrid rocket was presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.311-317
• /
• 2005

Hybrid rocket had many advantage with compared to solid and liquid rockets. In this study, swirl flow hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Thrust was calculated with pressure of the combustion chamber and the regression rate was measured in low flow rate of oxidizer. Several problems and solutions of operating hybrid rocket was presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.271-274
• /
• 2006

In order to predict the performance of the small-scale Polyethylene-GOX hybrid rocket motor, a typical internal ballistic model was proposed. The model adopted for the present study employed the lumped scale of chamber pressure so that the pressure-time history resulted from the present model was comparable to the test results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.46-51
• /
• 2007

The irregular fuel surface was observed by the visualization of hybrid rocket combustion. Even though the test condition maintained oxidizer rich environment, the irregular dark fuel surface was formed as the result of incomplete combustion. In order to investigate the correlation of the characteristics of oxidizer flow and the irregular fuel surface, various flow conditions were imposed such as swirl flow, induced swirl flow by helical fuel configuration and straight flow. Test results revealed no correlation was found between oxidizer flow condition and irregular fuel surface. And this can be a commonly observed phenomena in the tests with different fuel/oxidizer combination. Thus, the irregular fuel surface can be a result of the interaction of blowing flow of vaporized fuel and the boundary layer of oxidizer flow. A further study will be required to confirm the assumption for the formation of irregular fuel surface.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.55-62
• /
• 2011

In this study, we tried to improve the thrust control performance through the thrust control combustion experiment of the hybrid rocket. We constructed the system which controls the oxidizer flow by combining a needle valve with a stepping motor and controlling the stepping motor drive according to the thrust control command order. Gas oxygen was used as the oxidizer for two different propellants, PE(Polyethylene), PC(Polycarbonate), respectively. To improve the slow response time and the oscillation phenomenon in the beginning stage of the thrust control combustion experiment, we measured and analyzed the change of the flow speed of the propellant pipe. The revised thrust control combustion experiment showed that the thrust was stably controlled with the margin or error from the thrust command within ${\pm}1$ N.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.206-209
• /
• 2010

The visualization device for hybrid rocket is fabricated to investigate the combustion phenomena. Visualization device were composed with ignition system, oxidizer supply system, control system and data acquisition system, combustion visualization system. GOX as oxidizer and HDPE, Paraffin-LDPE Blending, Paraffin sd were used. As results, combustion phenomena and fuel droplet entrainment were observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.228-231
• /
• 2006

In general, burning time is not considered with a factor of an empirical relation on the combustion characteristic in hybrid propulsion system. So, The effect of burning time on hybrid combustion characteristics and propulsion characteristics was studied. As results, regression rate is decrease with burning time, but fuel mass flux is maintained nearly constant with burning time at given oxidizer mass flux.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.649-652
• /
• 2011

A series of hybrid rocket combustion experiments were carried out with PMMA/GOx changing diameter and length of the disk installed at pre-chamber. The disk can generate vortex shedding flow and change flow conditions prior to entering the fuel grain which could also alter the combustion characteristics and pressure oscillations. Isolated dimple-like surface roughness patterns distributed all over the fuel surface, which can be thought of as a realization of the inherent flow instability. It is very likely that the formation of cell structures is originated from the modification of boundary layer characteristics of an entering oxidizer flow caused by a blowing effect mainly taking place near the wall. This coincided with our LES results. It would be a meaningful basis to understand combustion instability of hybrid rocket motor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.18-25
• /
• 2014

In this paper, the mechanism of the combustion instability which may occur in a hybrid rocket motor with a diaphragm was studied. And the new design for a hybrid motor grain was suggested. It could increase a regression rate of solid fuel, and reduce a large pressure oscillation in a hybrid rocket motor with a diaphragm. It was confirmed that the main mechanism of a large pressure oscillation was hole-tone, and it was caused by a collision between a diaphragm and a vortex which was generated in a pre-chamber. And 'Stepped Grain' design which had the mechanism for high regression rate in a motor with a diaphragm and could reduce a combustion instability was suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.267-270
• /
• 2006

An experimental investigation was conducted to study the combustion characteristics of Polyethylene-GOX hybrid motor. Several regression-rate models based on the length average were compared with the experiment data, postulating to treat the mass-addition rate of fuel almost constant to the mass rate of oxidize flowing into combustor.