• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2010

This study was aimed at offering basic data to develop a new use of sawdust and rice husk. The results of this study were as follows: In surface temperature of ceramics by resin impregnation rate, the velocity was great in the early time of heat transfer because the temperature precipitously increased to 10 minutes elapsed. Also, the surface temperature of ceramics manufactured in resin impregnation rate of 60~70% indicated the highest. Heat transfer was fast in terms of the changes in surface temperature of ceramics according to the carbonization temperature, as because the density of ceramics made on condition of the carbonization temperature of $1000^{\circ}C$and $1200^{\circ}C$ was high. Moreover, ceramics maintained heat for a long time because the descent velocity of surface temperature of ceramics was slower than that of heater.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.108-112
• /
• 1984

The sorption characteristics of red pepper powder stored at various relative humidity and temperature were studied. At low relative humidity below RH 57%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 75%, the powder was browned by higher equilibrium moisture content. The moisture content of monolayer value for the powder was ranging from 11.32% to 12.13% with temperature. First order regression equation of equilibrium moisture content for relative humidity was determined.

• Geotechnical Engineering
• /
• v.3 no.3
• /
• pp.49-62
• /
• 1987

The settling behavior of marine fluid mud in the west seaside of Korea has been studied with theoretical analysis and experimental technique. This paper describes laboratorial experiments on the sedimentation and the deposition of soil particles in seawater, with measurement of velocity of interface, the water contents, the settlement. And the reseults are compared with an earlier theoretical research, the hindered settling theory of Kynch, McRoberts and Nixon. According to the results the process of Banweol mud sedimentation showed the typical mode of the hindered settling under the condition of initial water content, wo=1000%. Also, the falling rates of fluid mud interface from initial settling height vs. the rising rates of soil deposit from the bottom of the test tub were measured by the function of time, the correlati tranship of them demonstrated as a straight line and obtained an experimental formula.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1991-1995
• /
• 2010

도시화로 인한 토지 피복 상태의 변화로 인한 불투수면적의 증가와 강우강도가 증가함에 따라 지하수로 침투하지 못하고, 바다로 유출되는 강우량이 점차 증가하고 있다. 또한, 인구의 증가와 산업발달에 따른 무분별한 지하수의 사용은 심각한 지하수위의 하강으로 이어지고 있다. 지하수위와 강우량간의 상관관계를 분석하여 지하수의 체계적인 관리 및 운용을 하고자 본 연구를 진행하였다. 본 연구에서는 경상도 지역의 지하수위 관측소와 강우 관측소간의 거리가 10km 이내인 지점을 선정하여, 관측 자료와 분석결과를 토대로 13개 지점을 선정하였다. 침투현상이 침루과정을 거쳐 지하수에 유입되는 과정을 고려하면 강우가 발생한 시점보다 시간이 경과 한 후에 이 지점의 하루에 내린 강우량이 이틀에 걸쳐 지하수위에 영향을 준다고 가정하였고, 1일째의 강우를 실제 강우량의 최대 100%에서 50%까지로 설정하고 2일째에 나머지 강우가 내렸다고 가정하여 각각의 강우이동평균값과 지하수위간의 상관관계를 분석하였다. 또한, 한계침투량을 고려하여 강우이동평균값과 지하수위간의 상관관계를 분석하였다. 그 결과 한계침투량 고려시 상관계수가 0.5 이상인 지점들 중 약 70%가 강우량을 강우사상이 발생한 당일과 명일로 나누었을 때, 상관계수가 높게 나타났다. 그러므로 기존 강우와 지하수위 관측자료만 이용하여 강우이동평균과 지하수위의 상관관계를 분석하는 것 보다 침투율을 고려한 강우이동평균과 지하수위의 상관관계 분석으로 인해 지하수의 체계적인 관리와 분석이 가능할 것으로 사료된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.112-113
• /
• 2018

스트레스는 스트레스 요인에 반응하는 신체와 정신의 변화과정으로, 외부의 자극을 받으면 혈압, 심박동수, 호흡수가 증가하게 된다. 이러한 생체신호로 인간의 스트레스 요인을 측정할 수 있다. 본 연구에서는 선박조종시뮬레이션을 이용해 예비(견습)도선사가 도선접안 중 체감하는 스트레스의 정도와 특성을 생체신호 변화를 활용하여 실증적으로 분석하였다. 선박조종시뮬레이션에서 추출한 엔진 사용량, 타각 사용량, 속력 및 예선 사용량과 스트레스 분석을 위해 Heart BPM, SDNN, RMSSD의 3가지 심박변이도 파리미터의 상관관계를 분석하였다. 분석결과, 6회 중 4회의 시뮬레이션에서 Heart BPM은 지속적으로 상승하고 SDNN은 하강하여 시간에 따라 스트레스가 상승하는 것으로 분석되었다. 특히 예선 사용시점에서 변화의 폭이 큰 것을 확인하였다. RMSSD는 단기주기(1분간격) 측정 파라메터로 실험자가 느끼는 순간의 위험에 따라 그래프 변화폭이 심한 것으로 분석되었다. 전체적으로 엔진, 타각, 예선의 사용시점에 따라 큰 변화를 보였으며, 실험자들의 선박운용 행위에 따라 생체신호 변화를 보였다고 사료된다. 분석결과를 바탕으로 도선사에게 스트레스를 미치는 요소를 판별하여 도선접안 중 스트레스가 높아지는 순간에 인적사고를 예방할 수 있는 시스템적 보완을 마련하고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.1-7
• /
• 2004

The change in surface temperature of woodceramics, made from thinned logs of Pinus densiflora, were investigated, by the impregnation ratio and carbonizing temperature. As the surface temperature of silicon rubber heater was going up, that of woodceramics also increase rapidly. In case of heaters surface temperature at 70℃, the surface temperature of woodceramics was 53.9℃ when a sample was the impregnation ratio of 80%, while it was 54.2℃ when a sample was at 1,000℃ in carbonizing temperature, showing the highest. Also, it was found that woodceramics maintained heat for a long time because the descending velocity of their surface temperature was lower than that of the heater.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.39-46
• /
• 2021

To analyze and defend malware codes, reverse engineering is used as identify function location information. However, the stripped binary is not easy to find information such as function location because function symbol information is removed. To solve this problem, there are various binary analysis tools such as BAP and BitBlaze IDA Pro, but they are based on heuristics method, so they do not perform well in general. In this paper, we propose a technique to extract function information using LSTM-based models by applying algorithms of N-byte method that is extracted binaries corresponding to reverse assembling instruments in a recursive descent method. Through experiments, the proposed techniques were superior to the existing techniques in terms of time and accuracy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.240-248
• /
• 2016

As a new technical approach, the achievement of an eco-environmental leisure boat with a photovoltaic system is attempted by simultaneously actuating nine photovoltaic solar panels, in association with an applied sail control system by use of wind. In this approach, the photovoltaic system consists of a solar module, an inverter, a battery, and relevant components, while the sail control device is equipped with a sail up/down and mast-turning instrument. Furthermore, this research conducts a performance evaluation of the manufactured prototype and acquires the purposed quantity value and the development purpose items. The significant items-sail up/down speed (seconds) and mast turning angle (degrees)-are evaluated during the performance test. In the process of the performance evaluation, a wind direction sensitivity of 90% and a maximum instant charging power of 900 W were also obtained. In addition, the maximum sail time is evaluated in order to acquire the optimum quantity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1373-1382
• /
• 2014

This paper presents a hydraulic performance graph model in which the flow carrying capacity of a channel system was determined by accounting the interacting backwater effect among channel reaches and incoming lateral flow. The method utilizes hydraulic performance graphs (HPGs), and the method is applied to a natural channel Nakdong River to examine its applicability. This research shows that estimation results using HPG are close to records from the stage station and the results from a widely-accepted model, HEC-RAS. Assuming that a water level gage site is ungaged, water level estimations by HPGs compared with observation show that with a flood event, the HPGs underestimate in the water level ascension phase, but in the recession phase they overestimate results. The accuracy of estimation with HPGs was greatly improved by considering the time difference of flooding between the observation and estimation locations.

• Journal of Korea Water Resources Association
• /
• v.40 no.10
• /
• pp.793-800
• /
• 2007

This research applied to Wavelet transform that have soft resolution time and frequency area for stage of Hadong2 station in order to extract to discharge component by rainfall and tidal level component by tide. Approximation component(A6) of last level for wavelet decomposition displayed the biggest energy value 87.77%, and detail component(D3) energy value was 10.70% with periodicity of semidiurnal tide type(about 12 hours). Also skewness, kurtosis values of D3 have similar to tidal level of Yeosu. Approximation component(A6), Detail component(D6, D5) for Hadong2 stage was runoff component, and detail component(D4, D3, D2) was tide component according to effect of tide.