• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.464-477
• /
• 2013

There is a great need to develop a training program proven to change behavior and improve knowledge. The purpose of this study was to evaluate employee hygiene knowledge, hygiene practice, and cleanliness, before and after HACCP system implementation at one small-size restaurant. The efficiency of the system was analyzed using time-temperature control after implementation of u-HACCP$^{(R)}$. The employee hygiene knowledge and practices showed a significant improvement (p<0.05) after HACCP system implementation. In non-heating processes, such as seasoned lettuce, controlling the sanitation of the cooking facility and the chlorination of raw ingredients were identified as the significant CCP. Sanitizing was an important CCP because total bacteria were reduced 2~4 log CFU/g after implementation of HACCP. In bean sprouts, microbial levels decreased from 4.20 logCFU/g to 3.26 logCFU/g. There were significant correlations between hygiene knowledge, practice, and microbiological contamination. First, personnel hygiene had a significant correlation with 'total food hygiene knowledge' scores (p<0.05). Second, total food hygiene practice scores had a significant correlation (p<0.05) with improved microbiological qualities of lettuce salad. Third, concerning the assessment of microbiological quality after 1 month, there were significant (p<0.05) improvements in times of heating, and the washing and division process. On the other hand, after 2 months, microbiological was maintained, although only two categories (division process and kitchen floor) were improved. This study also investigated time-temperature control by using ubiquitous sensor networks (USN) consisting of an ubi reader (CCP thermometer), an ubi manager (tablet PC), and application software (HACCP monitoring system). The result of the temperature control before and after USN showed better thermal management (accuracy, efficiency, consistency of time control). Based on the results, strict time-temperature control could be an effective method to prevent foodborne illness.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.267-277
• /
• 2014

Objective of this paper is to assess the available data on the pesticide uses and regulations in the golf courses, and provide the nationwide systematic management options. Numbers of golf courses in Korea are rapidly increasing from 2000s and reached at 421 sites by the end of 2011. Accordingly pesticide usage has been increased with years in direct proportion to the increasing number of golf courses. Amounts of pesticide applied in 2011 were 118,669 kg as of an active ingredient and were in the orders of fungicides (54.9%) > insecticides (24.4%) > herbicides (13.3%) > growth regulators (0.1%). Average pesticide usages in 2011 were 280.9 kg per golf course and $5.4kg\;ha^{-1}$. Frequencies of the residual pesticide detections in green and turf were higher than those in fairway and soil, respectively. Residue of highly toxic pesticides was not detected in golf courses. Ministry of Environment in 2010 has developed the 'golf course pesticide monitoring and management system' which is the advanced online registry for kind and amount of pesticides applied in each golf course. This system is intended for monitoring of the pesticide uses and residual levels and protecting the environmental pollution from pesticides in the golf course. In 2009, management of pesticides in the golf courses became the task of Ministry of Environment, being merged from many federal agency and ministries. The protocol for the site-specific best management practices, on which to base results from the risk assessment, should be set for pesticides in the golf to minimize the environmental impacts.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.4
• /
• pp.1-12
• /
• 2014

It is essential factor for business operation to raise funds effectively. However, in Korea, many start-ups and small businesses have difficulties in fund-raising. In recent years, crowdfunding, a new method for funding a project of individuals or organizations by raising monetary contributions from a large number of people, has been growing up simultaneously with diffusion of social media. Crowdfunding is on early stage in Korea, and the majority of projects are focused on cultural or art categories. There is high proportion of projects that have social value in start-up sector. Crowdfunding in Korea has great potential because success rate of it is much higher than its of advanced countries, although market size is much smaller than them. The purpose of this paper is to propose success strategies of crowdfunding for start-up through case study. 5 crowdfunding platforms of Korea and Kickstarter, the platform of United States were investigated. Then we checked the figures related to the operation of the whole Korean projects on start-up. Finally, we made comparison between the cases of success and failure by analyzing 8 project characteristics. The study shows that it were the differences in trustworthiness and activeness of project creator, value of reward and efforts for interactivity that have great effects on success of the project. Whereas there was no significant influence of societal contribution and sponsor engagement. The thesis provides success strategies of crowdfunding for start-up as follows. Firstly, creator of the project should make support base by enthusiastic activites before launching funding project. Secondly, there should be contents that can easily show the process of business development in the project information. Thirdly, there must be appropriate design of rewards for each amounts of support money. Finally, efforts for interactivity, such as frequent updates, response for comments and SNS posting, should be followed after the launch of the project.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.751-758
• /
• 2012

In this study, we analyzed career paths and college life plans of department of chemistry education students in teacher's college examined by their roadmaps. We let students make their roadmaps and analyzed them using the PASW 18 program. There were significant differences on gender in their career paths, learning English, traveling and volunteer activity. Female students for passing the MEET(Medical Education Eligibility Test) or DEET(Dental Education Eligibility Test) were more interested in learning English and traveling than male students. In addition, female students were more interested in volunteer activity. And the lower year students, the more interested in medical paths, learning English, traveling, getting good grades, exchange student program and scholarship. On the other hand the higher year students, the more interested in group study or E-learning. Then significant differences were in learning English, traveling and getting good grades by students's career paths. Students who wish to pass the MEET or DEET were more interested in learning English and getting good grades. Those two factors were essential in passing the MEET or DEET. Students who did not specified their career paths had more traveling plans than other students for setting their directions of careers. These results show that freshman and female students don't recognize the identity of teacher's college correctly. Because of reduction in the number of teacher recruitment according to decrease of students by birth rate drop, students in teacher's college are expected to continue like this trend that students look for other paths. Therefore, it is required career counseling and guidance for students who give priority practical path choices and college life plans over original characteristics of teacher's college. And it should be reconsidered the direction of chemistry education prepared the identity of teacher's college reflected in this actuality.

• Clean Technology
• /
• v.25 no.4
• /
• pp.316-323
• /
• 2019

In order to enhance combustion efficiency and reduce atmosphere pollutants, it is essential to measure carbon monoxide (CO) concentration precisely in combustion exhaust. CO is the important gas species regarding pollutant emission and incomplete combustion because it can trade off with NOx and increase rapidly when incomplete combustion occurs. In the case of a steel annealing system, CO is generated intentionally to maintain the deoxidation atmosphere. However, it is difficult to measure the CO concentration in a combustion environment in real-time, because of unsteady combustion reactions and harsh environment. Tunable Diode Laser Absorption Spectroscopy (TDLAS), which is an optical measurement method, is highly attractive for measuring the concentration of certain gas species, temperature, velocity, and pressure in a combustion environment. TDLAS has several advantages such as sensitive, non-invasive, and fast response, and in-situ measurement capability. In this study, a combustion system is designed to control the equivalence ratio. Also, the combustion exhaust gases are produced in a Liquefied Petroleum Gas (LPG)/air flame. Measurement of CO concentration according to the change of equivalence ratio is confirmed through TDLAS method and compared with the simulation based on Voigt function. In order to measure the CO concentration without interference from other combustion products, a near-infrared laser at 4300.6 cm^-1 was selected.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.207-244
• /
• 2015

Aviation safety is the stage in which the risk of harm to persons or of property damage is reduced to, and maintained at or below, an acceptable level through a continuing process of hazard identification and risk management. Many accidents and incidents have been taking place since 2014, while there had been relatively safer skies before 2014. International civil aviation community has been exerting great efforts to deal with these emerging issues, thus enhancing and ensuring safety throughout the world over the years. The Preamble of the Chicago Convention emphasizes safety and order of international air transport, and so many Articles in the Convention are related to the safety. Furthermore, most of the Annexes to the Convention are International Standards and Recommended Practices pertaining to the safety. In particular, Annex 19, which was promulgated in Nov. 2013, dealing with safety management system. ICAO, as law-making body, has Air Navigation Commission, Council, Assembly to deliberate and make decisions regarding safety issues. It is also implementing USOAP and USAP to supervise safety functions of member States. After MH 370 disappeared in 2014, ICAO is developing Global Tracking System whereby there should be no loophole in tracking the location of aircraft anywhere in world with the information provided by many stakeholders concerned. MH 17 accident drove ICAO to install web-based repository where information relating to the operation in conflict zones is provided and shared. In addition, ICAO has been initiating various solutions to emerging issues such as ebola outbreak and operation under extreme meteorological conditions. Considering the necessity of protection and sharing of safety data and information to enhance safety level, ICAO is now suggesting enhanced provisions to do so, and getting feedback from member States. It has been observed that ICAO has been approaching issues towards problem-solving from four different dimensions. First regarding time, it analyses past experiences and best practices, and make solutions in short, mid and long terms. Second, from space perspective, ICAO covers States, region and the world as a whole. Third, regarding stakeholders it consults with and hear from as many entities as it could, including airlines, airports, community, consumers, manufacturers, air traffic control centers, air navigation service providers, industry and insurers. Last not but least, in terms of regulatory changes, it identifies best practices, guidance materials and provisions which could become standards and recommended practices.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.143-159
• /
• 2017

Due to the rapid development of IT in recent years, not only personal information but also the key technologies and information leakage that companies have are becoming important issues. For the enterprise, the core technology that the company possesses is a very important part for the survival of the enterprise and for the continuous competitive advantage. Recently, there have been many cases of technical infringement. Technology leaks not only cause tremendous financial losses such as falling stock prices for companies, but they also have a negative impact on corporate reputation and delays in corporate development. In the case of SMEs, where core technology is an important part of the enterprise, compared to large corporations, the preparation for technological leakage can be seen as an indispensable factor in the existence of the enterprise. As the necessity and importance of Information Security Management (ISM) is emerging, it is necessary to check and prepare for the threat of technology infringement early in the enterprise. Nevertheless, previous studies have shown that the majority of policy alternatives are represented by about 90%. As a research method, literature analysis accounted for 76% and empirical and statistical analysis accounted for a relatively low rate of 16%. For this reason, it is necessary to study the management model and prediction model to prevent leakage of technology to meet the characteristics of SMEs. In this study, before analyzing the empirical analysis, we divided the technical characteristics from the technology value perspective and the organizational factor from the technology control point based on many previous researches related to the factors affecting the technology leakage. A total of 12 related variables were selected for the two factors, and the analysis was performed with these variables. In this study, we use three - year data of "Small and Medium Enterprise Technical Statistics Survey" conducted by the Small and Medium Business Administration. Analysis data includes 30 industries based on KSIC-based 2-digit classification, and the number of companies affected by technology leakage is 415 over 3 years. Through this data, we conducted a randomized sampling in the same industry based on the KSIC in the same year, and compared with the companies (n = 415) and the unaffected firms (n = 415) 1:1 Corresponding samples were prepared and analyzed. In this research, we will conduct an empirical analysis to search for factors influencing technology leakage, and propose an early warning system through data mining. Specifically, in this study, based on the questionnaire survey of SMEs conducted by the Small and Medium Business Administration (SME), we classified the factors that affect the technology leakage of SMEs into two factors(Technology Characteristics, Organization Characteristics). And we propose a model that informs the possibility of technical infringement by using Support Vector Machine(SVM) which is one of the various techniques of data mining based on the proven factors through statistical analysis. Unlike previous studies, this study focused on the cases of various industries in many years, and it can be pointed out that the artificial intelligence model was developed through this study. In addition, since the factors are derived empirically according to the actual leakage of SME technology leakage, it will be possible to suggest to policy makers which companies should be managed from the viewpoint of technology protection. Finally, it is expected that the early warning model on the possibility of technology leakage proposed in this study will provide an opportunity to prevent technology Leakage from the viewpoint of enterprise and government in advance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.89-116
• /
• 2008

RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.479-487
• /
• 2001

The perception of facial esthetics is critically important to orthodontists. A viewpoint to facial esthetics is influenced by various factors and dependent on the perception of observer. The purpose of this study was to examine the differences regarding esthetic viewpoints among orthodontists, to identify attractive profiles preferred to orthodontists and to present the characteristic aspects of attractive profiles upon the degree of facial convexity. 35 persons whose faces were judged as attractive one by S orthodontists were selected out of 133 young Korean women. Soft tissue profiles Identified as a good-profile group were measured and analyzed. And then according to the facial convexity, good-profile group was subdivided to convex (G-Sn-Pg$9^{\circ}$) and straight (G-Sn-Pg<$9^{\circ}$) groups for the purpose of this study. There were statistically no significant differences regarding esthetic viewpoints among S orthodontists(p<0.05), even if there exists prevailing concept that the standard for facial esthetics is substantially subjective. N-Pg-Sn and N-Pg-Pn, measured for determining anteroposterior relationship of midfacial convexity, showed significant differences statistically between 2 subgroups (P

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.363-371
• /
• 1992

This study was aimed at developing a computer model to determine rational road networks in mountainous forests. The computer model is composed of two major subroutines for digital terrain analyses and route selection. The digital terrain model(DTM) provides various information on topographic and vegetative characteristics of forest stands. The DTM also evaluates the effectiveness of road construction based on slope gradients. Using the results of digital terrain analyses, the route selection subroutine, heuristically, determines the optimal road layout satisfying the predefined road densities. The route selection subroutine uses the area-partitioning method in order to fully of roads. This method leads to unbiased road layouts in forest areas. The size of the unit partitiones area can be calculated as a function of the predefined road density. In addition, the user-defined road density of the area-partitioning method provides flexibility in applying the model to real situations. The rational road network can be easily achived for varying road densities, which would be an essential element for network design of forest roads. The optimality conditions are evaluated in conjuction with longitudinal gradients, investment efficiency earthwork quantity or the mixed criteria of these three. The performance of the model was measured and, then, compared with those of conventional ones in terns of average skidding distance, accessibility of stands, development index and circulated road network index. The results of the performance analysis indicate that selection of roading routes for network design using the digital terrain analysis and the area-partitioning method improves performance of the network design medel.