• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1275-1280
• /
• 2015

A large-sized exciter that vibrates a two-ton component is required to simulate the field operating conditions of a counterweight of an excavator. However, it is difficult for a small-medium sized company to obtain a large exciter for the life test of a counterweight which is an equivalent counterbalancing weight that balances a load. Therefore, in this study, we developed life test equipment for evaluating the reliability of construction machinery weighing about two tons. It simulates the field operating conditions using rotational vibrators consisting of electric motors. A failure analysis of the counterweight was also performed for the major components. Field data acquired from various sites were applied to the life test design of the counterweight. Finally, a zero-failure qualification test based on the accelerated life test was designed, and there was no failure during the test, which guarantees a life of $B_5$ 10,000 hours.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.518-536
• /
• 2009

To verify the performance of a Distributed Translator Network(DTxR) system in the real world conditions, 5 legacy DTV broadcasting repeater sites were implemented with 5 DTxR systems and field-tested by the DTV field test truck. The 4 DTV broadcasting repeater sites are selected in congested areas where their service areas are overlapped and the 5th site is deviated from the other sites to examine the effect of long-delayed multipath signals. First of all, we checked the receiving signal of the main station that used as a transmitting signal in 5 DTxR systems on the pre-selected 60 test points and tested every case of a DTxR system's on & off except 1 repeater site due to the already built-in DTV repeater system. The test items are received signal electric field strength, noise margin, ease of reception and subjective evaluation of the picture quality for received signals. We used 3rd, 5th, and 6th generation DTV receivers to examine the differences of the receivability by each generation of DTV receivers. Reviewing the test results, we conclude that the DTxR system can be adopted in the current DTV Repeater sites and it could improve the quality and receivability of the main signals by extending the service areas and enhancing the signal levels in the shadow areas without using the extra broadcasting channels.

• Journal of the Korean Society for information Management
• /
• v.37 no.2
• /
• pp.197-223
• /
• 2020

The purpose of this study is to analyze the issues resulted from the process of grouping KORMARC records using FRBR WORK concept and to suggest a new method. The previous studies did not sufficiently address the criteria or processes for identifying representative authors of records and their derivatives. Therefore, our study focused on devising a method of identifying the representative author when there are multiple contributors in a work. The study developed a method of identifying representative authors using an author role dictionary constructed by extracting role-terms from the statement of responsibility field (245). We also designed another way to group records as a work by calculating similarity measures of authors and titles. The accuracy rate of WORK grouping was the highest when blank spaces, parentheses, and controling processes were removed from titles and the measured similarity rates of authors and titles were higher than 80 percent. This was an experiment study where we developed an author-role dictionary that can be utilized in selecting a representative author and measured the similarity rate of authors and titles in order to achieve effective WORK grouping of KORMARC records. The future study will attempt to devise a way to improve the similarity measure of titles, incorporate FRBR Group 1 entities such as expression, manifestation and item data into the algorithm, and a method of improving the algorithm by utilizing other forms of MARC data that are widely used in Korea.

• Journal of The Korean Association For Science Education
• /
• v.40 no.1
• /
• pp.1-12
• /
• 2020

In scientific argumentation, students can use rebuttals to escape uncertainty, which, in this case, can be defined as a vague and fuzzy feeling about other students' explanations. As rebuttals can play a critical role in the sophistication of arguments and the alleviation of uncertainty, this study aims to understand the dynamics of uncertainty and rebuttals by exploring the context of the uncertainty experienced by elementary school students in the argumentation of "Why did the kidney beans not germinate?" and to get insights based on the research results. Twenty fourth-grade students and their homeroom teacher in Kyong-Ki province, South Korea, took part in the research. Students engaged in argumentation in five small groups of four students. The researcher collected qualitative data through video transcriptions, student interviews, and field notes. In the data analysis, the researcher employed the constant comparative method to explore in what context students experienced uncertainty and how they used rebuttals. The results of this study were as follows: First, students tried to reduce their uncertainty through argumentation on why the kidney beans did not germinate. Second, students used elaboration-oriented rebuttals, personal opinion-oriented rebuttals, and blame-oriented rebuttals to reduce this uncertainty. However, when they used blame-oriented rebuttals, their uncertainty and negative emotions increased. Third, intervention by the teacher led students to stop using blame-oriented rebuttals. Instead, they employed elaboration-oriented rebuttals to explore why the kidney beans would not sprout, and finally, they escaped uncertainty by discovering an appropriate explanation. Based on the findings of this study, the researcher discussed how the interaction between uncertainty and elaboration-oriented rebuttals could shape and facilitate argument development in elementary school students.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.73-84
• /
• 2013

This study, based on flow theory and unified theory of acceptance and use of technology (UTAUT), examines various factors that influence the continuous use of mobile applications, particularly those providing users with satisfaction and pleasure as well as useful information. This study extends the previous studies that have been based on technology acceptance model, in which usefulness and ease of use are key determinants of use of new technology, by introducing flow theory in explaining the use of various technologies in mobile environment. For this purpose, this study employes a survey based field study and collects data from individuals who use fashion mobile apps since these are considered to provide fun and pleasures. This study finds that flow theory is a proper framework to understand the use of mobile technology, indicating flow experience is an important variable to determine the usage of fashion apps. In addition, performance expectation, effort expectation, social influence, and facilitation condition are found to be significant in influencing use of mobile apps, suggesting UTAUT still plays an important role in understanding the use of mobile technology.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.81-87
• /
• 2018

The objective of this article is to provide analytical tools for the scattering of stratum corneum (SC) and to check whether the optical clearing agents (OCAs) could be applied in optics affecting the scattering reduction. Dark field images of tape striped corneocyte separates scattered light of the SC from others in vitro. Several optical clearing agents were tested to reduce the scattering. Physical properties of SC such as water contents, keratin configuration and volume after OCAs treatment were investigated by FT-IR and 3D laser microscope. Several reducing sugars, monomeric sugars, sugar alcohol, and hyaluronic acid, which were used as humectants in cosmetic field, also reduced scattering. However, unlike dehydration in optics, water penetrated into the keratin in SC and scattering was decreased at low concentration of OCAs. In that condition, the volume of corneocyte was increased and stiffness seemed to decrease. The analyzing of tape-stripped SC, showed the change of optical and physical properties of corneocyte by optical clearing agents. The hydration of SC layer by optical clearing agents decreased the scattering of corneocyte and thus improved the skin appearance and moisturizing effect, which are important benefits in the cosmetic field and could provide new possibility to develop skin care study targeting at SC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.1007-1015
• /
• 2008

In order to provide real-time data from sensors and instruments at manufacturing processes on web, we proposed a communication service model based on XML(eXtensible Markup Language). HTML(Hyper Text Markup Language) is inadequate for describing real-time data from manufacturing plants while it is suitable for display of non-real-time multimedia data on web. For applying XML-based web service of process data in Intranet environment, real-time performance of communication services was evaluated to provide the system design criteria. XML schema for the data presentation was proposed and its communication performance was evaluated by simulation in terms of transmission delay due to increased message length and processing delay for transformation of raw data into defined format. For transformation of raw data into XML format, we proposed two structures: one is the scheme where transformation is done at an SCC(Supervisory Control Computer) after receiving real-time data from instruments. the other is the scheme where transformation is carried out at instruments before the data are transmitted to the SCC. Performances of two structures were evaluated on a testbed under various conditions such as six packet sizes and offered loads of 20%, 50% and 80%, respectively. Test results show that proposed schemes are applicable to the systems in Ethernet 100BaseT network if total message traffic is less than 7 Mbps.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.2
• /
• pp.114-124
• /
• 2009

In this paper, we propose a practical TCP friendly rate control scheme that considers the minimum channel bandwidth of the network when transporting SVC (scalable video coding) video over IP netowrks such as Internet. RTP and RTCP is mainly designed for use with UDP (User Datagram Protocol) for real-time video transport over the Internet. TCP-friendly rate control was proposed to satisfy the demands of multimedia applications while being reasonably fair when competing for bandwidth with conventional TCP applications. However the rate control model of the conventional TCP-friendly rate control scheme does not consider the minimum channel bandwidth of the network. Thus the estimated channel bandwidth by the conventional rate control model might be quite different from the real channel bandwidth when the packet loss ratio of the network is very large. In this paper, we propose a modified TCP-friendly rate control scheme that considers the minimum channel bandwidth of the network. Based on the modified TCP-friendly rate control, we assign the minimum channel bandwidth to the base layer bitstream of SVC video, and remaining available bandwidth is allocated to the enhancement layer of SVC video for the TCP friendly scalable video transmission. It is shown by simulations that the modified TCP-friendly rate control scheme can be effectively used for a wider range of controlled bit rates depending on the packet loss ratio than the conventional TCP-friendly control scheme. Furthermore, the effectiveness of the proposed scheme in terms of objective video quality is proved by comparing PSNR performance with the conventional scheme.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.113-124
• /
• 2019

In this study, the operational characteristics of a cam-type vegetable transplanter which usually used in domestic was analyzed and operating mechanism of a transplanting device was analyzed. The main components and power path of the transplanter were analyzed. The maximum and minimum control cycles according to the moving speed and the plant spacing were analyzed. 3D modeling and simulation were performed to derive the trajectory of the bottom end of the transplanting hopper and the plant spacing at the each operating condition. The simulation results were verified by the field tests. As main findings of this study, the transplanting device has one degree of freedom (DOF) which consist of 13 links, 17 rotating joints and 1 half joint, and each part has composite structure with cam and links. By continuous and repetitive motion of the structures of transplanting device, the transplanting hopper plants the seedling in the ground with a vertical direction, and the seedling was planted stably. The power is transmitted to the driving part and transplanting device from the engine, and the maximum and minimum plant spacing of the transplanting device were about 900 mm and 350 mm, respectively.