• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.141-145
• /
• 2005

어드레스-표시 동시 구동방식을 사용한 고속 구동기술을 개발하여 실험용 PDP에 적용하였다. 연구에서 주사 펄스의 폭과 주사 펄스와 첫 번째 서스테인 펄스 사이의 시간간격을 변화시키면서 어드레스 방전 특성을 측정하였다. 실험결과 이 고속 구동기술은 어드레스 방전의 벽전하 대신에 공간전하로 서스테인 방전을 유도한다는 것을 알았다. 그리고 12개의 서브필드를 가지며 1080개의 주사선을 가지는 full-HDTV급 PDP를 구동시킬 수 있는 조건을 만족하는 $0.7{\mu}s$ 수준의 주사 펄스폭과 20V의 어드레스 구동마진을 실현하였다.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.463-478
• /
• 2008

A Distributed Translator Network(DTxR) is a cost-effective and frequency-effective method which can use existing transmission utilities and can be constructed in a shorter time as compared with Multiple Frequency Network(MFN) or Single Frequency Network(SFN) using On Channel Repeater(OCR). In order to verify the feasibility of DTxR, this field test was done in 30 points of north-west area in Seoul using 3rd, 5th, and 6th generation DIV receivers. Electric field strength, noise margin and ease of reception were measured and subjective evaluation of video quality was done in these points during the field test. With the test result, an improvement of receiving quality was obtained and an ease of reception was increased in case of the 5th. and 6th. receiver. From the results, we conclude that DTxR is a feasible method in DIV networks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.141-147
• /
• 2019

In this paper, a systematic beam splitter design for multi-beam forming is proposed. The objective of this research is to a design beam splitter that splits and focuses scattering microwaves into intense beams in multiple directions. It is difficult to split multi-beam to non-specific directions with theoretical approaches. Therefore, instead of using transformation optics(TO), which is a widely used process for controlling electromagnetic wave propagation, we used a systematic design process called the phase field design method to obtain an optimal topological structure of beam splitter. The objective function is to maximize the norm of electric field of the target areas of each direction. To avoid island structure and obtain the structure in one body, volume constraint is added to the optimization problem by using augmented Lagrangian. Target frequency is set to X-band 10GHz. The optimal beam splitter performed well in multi-beam forming and the transported electric energy of target areas improved. A frequency dependency test was conducted in the X-band to determine effective frequency range.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.427-431
• /
• 2017

Recently, complaints of floor noise have been growing up with the rapid increase of the residential buildings. This demands the effective floor noise isolation system. Since the construction of high-rise the residential buildings will be increased even more in future, the noise isolation is a more important technology in the market. In this study, a new floor noise isolation panel (FNIP) was designed and manufactured using waste rubbers. The noise isolation was investigated at both laboratory and field conditions. Light and heavy weight shock wave showed 52 dB and 48 dB in the field test, respectively. The new system could reduce the total floor thickness by 22~42 mm.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.977-985
• /
• 2011

Airborne separation assurance is a key requirement for Free Flight Airspace operations, This paper study the feasibility of airborne separation assurance for free flight Airspaces operations by evaluating the efficiency measurement models. Three qualitatively different methods are utilized; one based Ground and Air conflict probability model, other based Dynamic Density model. the other based Direct operating cost model. The evaluation is Direct Operating Cost model and Two metrics are utilized for the efficiency measurements; airborne separation assurance performed quite well in the Free Flight evaluation; (1) 2 scenario of the conflict situations are resolved; (2) The MD-80 flight peformed separation assurance and efficiency, Not only appling for geometric method algorithm is more efficiently than potential method, but also the most efficiently geometric combined method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.205-210
• /
• 2006

어드레스-표시 동시 구동방식에 의한 고속 구동기술을 개발하기 위하여 PDP의 어드레스 기간에 인가하는 주사 펄스의 폭에 의한 방전특성을 실험용 PDP를 사용하여 실험하였다. 본 연구에서는 주사 펄스의 폭과 주사 펄스와 이어서 인가되는 첫 번째 서스테인 펄스 사이의 시간간격을 변화시키면서 어드레스 방전특성을 측정하였다. 실험결과 주사펄스의 폭이 $1.3{\mu}s$ 이하로 좁아지면 어드레스 방전의 벽전하 대신에 공간전하로 서스테인 방전이 유도되므로 각 전극에 인가하는 펄스의 전압조건이 달라져야 한다는 것을 알았다 또한 주사 펄스폭이 좁아지면 어드레스 방전개시전압이 크게 상승함을 알았다. 실험결과 12개의 서브필드를 가지며 1080개의 주사선을 가지는 full-HDTV급 PDP를 구동시킬 수 있는 조건인 $0.7{\mu}s$ 수준의 주사 펄스폭 이상에서 약 10V의 일정한 서스테인 구동마진이 얻어짐을 알았다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.761-767
• /
• 1998

The Perfectly Matched Layer(PML) provide good performance in absorption over a wide frequency range and is an appropriate ABC for waveguides with high dispersion. In this paper, a novel algorithm is proposed to improve the computational efficiency of the PML. In the input and output ports, the fields are decomposed into a series of modes, and then an appropriate ABC is applied to each mode. CPU time and memory storage requirements are greatly reduced, since the computational region is analyzed in one dimension. A WG-90 rectangular waveguide with a thick asymmetric iris is analyzed by Finite-Difference Time-Domain(FDTD) simulations with the conventional PML and the proposed one-dimensional (1-D) PML. Numerical results show that the computational efficiency is significantly improved by the proposed method.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.161-169
• /
• 2008

This paper introduces test configuration and operation method for the GPS receiver system under electromagnetic test of KSLV-I upper-stage as a system qualification level and describes performance analysis of the test results. The GPS receiver system has clearly passed the electromagnetic test specifications of component level which is based on MIL-STD-461E through several design changes. Under electromagnetic test as a system qualification level, the GPS receiver system normally operates in spite of electromagnetic interferences with other systems. Performance of the GPS receiver system is also, not degraded on the condition of electromagnetic field incidence and electrostatic discharge. The KSLV-I GPS receiver system, as a result, is verified on the electromagnetic condition of the KSLV-I upper-stage.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.149-170
• /
• 2017

which was first shown as TV series in 1995 has been highly praised until now successful animation that reflected human psychology and ideology. first gained popularity in Japan and spreaded into global animation market. Characteristics of can be summarized as mechanical design, realistic military mise-en-scene, and philosophical view of the world based on the bible. All works reflect the philosophy and ideology of the writer/creator, but reflects various form of ideology. Furthermore, 's ambiguous and vague plot made the fans to discuss and analyze about the work, which brought secondary marketing effect. In this report, the ideology reflected in will be analyzed and understand how these ideologies were reflected in the work. By analyzing religious, psychological and philosophy ideologies in , ideology can be proved as success factor of animation films.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.1-7
• /
• 2015

These anti-jamming GPS systems are verified using large anechoic chamber or field-test until now. When using a large anechoic chamber, Independent verification from external enviroments like noise is an advantage but high cost and availability of chamber are disadvantages. And in case of field test, verification under real propagation enviroment is an advantage but security problem of military equipments and problem of making same test condition are disadvantages. This paper presents an newly developed anti-jamming GPS test system. This test system mainly consists of small anechoic chamber, jamming divider, jamming signal generator and satellite simulator. The small anechoic chamber is installed many jamming antennas to transmit multi jamming signals and the jamming divider is newly developed to control multi jamming signals. According to self performance test and combined test with Anti-jamming GPS receiver, we verified our system's reliability.