• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.5
• /
• pp.1-9
• /
• 2012

Memristor which is known as fourth basic circuit element has been developed recently but its electrical characteristics are not still fully understood. Memristor has the incremental and decremental feature of the resistance depending upon the connected polarities. Also, its operational behavior become diverse depending on its connection topologies. In this work, electrical characteristics of diverse types of serial and parallel connections are investigated using the HP $TiO_2$ model. The characteristics are analyzed with pinched hystersis loops on the V-I plane when sine input signal is applied. The results of the work would be utilized usefully for analyzing the characteristics of memristor element and applications to logic circuit and neuron cells.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.10-16
• /
• 2003

To analyze the effects of the air-bridge parasitic capacitances on the performance of coplanar waveguide pseudomorphic high electron mobility transistors (CPW PHEMTs), the gate-to-air-bridge ( $C_{ag}$ ) and the drain-to air-bridge ( $C_{ad}$ ) capacitances were taken into account plus the conventional pinched-off cold. FET circuit model. To examine the effects of the parasitic capacitances due to the air-bridges, a variety routing schemes for the air-bridge interconnection were adopted for fabricating the 0.1-${\mu}{\textrm}{m}$ $\Gamma$-gate length CPW HEMT's. According to air-bridge schemes, the $S_{21}$ gain is affected considerably. From the results of the fabricated CPW PHEMT, the $C_{ag}$ and $C_{ad}$ is one of the important factor of decreasing the gain of HEMTs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.383-389
• /
• 2001

We report on the design, fabrication, and characterization of 0.35${\mu}{\textrm}{m}$-gate AIGaAs/InGaAs PHEMTs for millimeter-wane applications. The epi-wafer structures were designed using ATLAS for optimum DC and AC characteristics, 0.351m-gate AIGaAs/rnGaAs PHEMTs having different gate widths and number of fingers were fabricated using electron beam lithography Dependence of RF characteristics of PHEMT on gate finger with and number of gate fingers have been investigated. PHEMT haying two 0.35$\times$60${\mu}{\textrm}{m}$$^2$ gate fingers showed the knee voltage, pinch-off voltage, drain saturation current density, and maximum transconductance of 1.2V, -1.5V, 275㎃/mm, and 260.17㎳/mm, respectively. The PHEMT showed fT(equation omitted)(current gain cut-off frequency) of 45㎓ and fmax(maximum oscillation frequency) of 100㎓. S$_{21}$ and MAG of the PHEMT were 3.6dB and 11.15dB, respectively, at 35㎓

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.378-387
• /
• 2023

Petrochemical is an energy consuming industry that consumes about 30% of total industrial energy consumption and is a representative carbon dioxide (CO₂) emission source. Among them, the Naphtha Cracking Center (NCC), which produces ethylene, propylene, propane and mixed C4, consumes large amounts of energy and emits significant amounts of CO₂. For this reason, an integrated techno economic- environmental impact assessment aimed at reducing energy consumption and environmental impact factors is necessary to ensure efficiency in terms of economics and environment. This study aims to analyze the efficiency of the heat exchanger network used in the existing NCC base on the pinch analysis and select an improvement plan that can reduced energy consumption. In order to reduces the utility consumption in the process, an optimal heat exchanger network considering the high-temperature and low-temperature stream was derived, and the economic evaluation was conducted by considering the trade-off between the reduction in utility consumption and the increase in heat exchanger installation cost. In addition, an environmental impact assessment was conducted on the reduced CO₂ emission in consideration of the environmental aspect, and the economic environmental impact assessment used the payback period to recover the invested funds to come up with an energy saving plan that can be applied based on the actual process. As a result of considering the economic-environmental impact assessment, when the environmental impact assessment was not considered, it was 4.29 months, 3.21 months, and 3.39 months for each case, and when considering the environmental impact assessment, it was 4.24 months, 3.17 months, and 3.35 months for each case. These results appeared equally both when the environmental impact assessment was not include and when it was include. In addition, a sensitivity analysis was conducted for each case to determine how important factors affect the payback period. As a result of the sensitivity analysis, the cost of the heat exchanger was identified as a major factor influencing the overall cost.