• Journal of the Society of Disaster Information
• /
• v.9 no.3
• /
• pp.324-331
• /
• 2013

Epoxy asphalt concrete is used to reduce dead load and to increase durability on long-span steel bridge overlay. The strength development properties of epoxy asphalt concrete are affected by time and temperature because epoxy asphalt is two-phase reactive materials. The strength development of epoxy asphalt concrete should be predicted precisely to decide traffic opening time. Based on this background in mind, the prediction model for traffic opening time for epoxy asphalt pavement was proposed in this research. The developed model using nonlinear curve fitting revealed R2 value of 0.943 while the R2 value of the existing model using chemical kinetics was 0.806. An improved precise prediction result is to be obtained when the prediction model uses accurate temperature data of pavement.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2010

Purpose: This study was performed to achieve an acceptable piggyback fit utilizing each subject's own GP lenses, in subjects with regular low myopic astigmatism. Methods: A randomized, prospective study of 15 subjects with the diagnosis of low myopic astigmatism was conducted. Nine subjects were female and 6 were male, and mean age was: 23.73${\pm}$1.68 years. Subjects were evaluated before participate on this study and then also evaluated with period of at two hours and two weeks after obtaining their lenses. All subjects were submitted to the following tests: measurement of comfort level by means of the analogical visual scale, best corrected visual acuity and over-refraction at distance. contrast sensitivity and stereo acuity. After evaluating the fit of plano soft lens, we applied each subject's own GP lens on top. Results: Vision, visual performance and satisfaction of piggyback contact lens system were stable, if not improved, for the 15 subjects when the data was compared to the patients' wear of rigid gas permeable contact lenses. Fit with a piggyback system had the same or improved comfort, visual acuity and contrast sensitivity compared to previous GP lens wear alone. The visual acuity, contrast sensitivity and stereo acuity did not show differences in relation to the studied lens type. Conclusions: These results suggest that it is possible to achieve a successful piggyback lens fitting utilizing a patient's own GP lens. The piggyback lens system satisfied the visual performance and visual requirements of this subject with GP lens alone for the correction of low myopic astigmatism.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1231-1237
• /
• 1999

Applying the conjugate contact condition, contact lines of a cylindrical worm gear has been calculated. The characteristics of tooth contact were analyzed and the pitting resistance were also assessed. It has been verified that: i) the length of contact is shortest on the 1st tooth of the front region, ii) the contact region is more narrow in the recess side than in the access side, iii) the contact region is more narrow in worm than in worm wheel. Hence, the pitting resistance is weakest in the recess side of the 1st contacting worm tooth.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.23-35
• /
• 2015

Nonlinear soil behavior before failure under dynamic loading is often implemented in a numerical analysis code by a mathematical fitting function model with Masing's rule. However, the model may show different behavior with an experimental results obtained from laboratory test in damping ratio corresponding secant shear modulus for a certain shear strain rage. The difference may come from an unique soil characteristics which is unable to implement by using the existing mathematical fitting model. As of now, several fitting models have been suggested to overcome the difference between model and real soil behavior but consequence of the difference in dynamic analysis is not reviewed yet. In this paper, the effect of the difference on site response was examined through nonlinear response history analysis. The analysis was verified and calibrated with well defined dynamic geotechnical centrifuge test. Site response analyses were performed with three mathematical fitting function models and compared with the centrifuge test results in prototype scale. The errors on peak ground acceleration between analysis and experiment getting increased as increasing the intensity of the input motion. In practical point of view, the analysis results of accuracy with the fitting model is not significant in low to mid input motion intensity.

• Information and Communications Magazine
• /
• v.31 no.12
• /
• pp.38-43
• /
• 2014

효과적인 칼로리 소비는 칼로리 균형의 측면에서 매우 중요하다. 활동으로 인해 소비되는 열량은 사람의 일일 총 소비 열량 중 15~30%를 차지하며 사람들은 오직 이 부분만을 조절할 수 있다. 트레드밀 위에서의 활동 강도가 증가 할수록 소비되는 칼로리의 증가 경향은 $y=27.33e^{0.21x}$의 지수함수 형태의 곡선에 피팅됨을 확인할 수 있었다. 또한 인공신경망을 활용한 소모 열량 추정 알고리즘은 전체적 상관관계가 R=0.94로 좋은 결과를 보여주었다.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.517-522
• /
• 2012

In this study, a super carburizing treatment was applied to improve roller pitting fatigue life. It produced excellent properties of surface hardness and temper softening resistance by forming precipitation of fine and spherodized carbides on a tempered marstensite matrix through the repeated process of carburization and diffusion after high temperature carburizing step 1. The cycle II performed two times carburizing/diffusion cycle (process) after super carburization at $1,000^{\circ}C$ had fine and spherodized carbides to subsurface $200{\mu}m$. In this case, the carbide was $(Fe,Cr)_3C$ and there was not any massive carbides. In the case of Cycle II, the roller pitting fatigue life had a 6.15 million cycles. It was improved 48% compared to normal gas carburizing treatment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.440-443
• /
• 2024

한의학의 증상을 파악하는 한의 변증 진단에서 혀의 형태와 색상을 파악하는 것에서 설질과 설태의 색상을 파악하는 것이 핵심이다. 혀 촬영 장치로 촬영하더라도 조명의 빛 종류와 빛 강도, 위치에 따라 컬러가 변환됨에 따라 혀 취득장치의 컬러교정이 필요하다. 컬러교정을 하지만, 오버피팅, 측정 오류와 노이즈 또는 색상 공간의 불균형으로 컬러의 왜곡이 발생할 수 있다. 이 연구에서는 24개의 patch 중에서 오류를 최소화할 수 있는 patch를 선정하는 최적화의 방법을 제시하려 하였다. 24개 patch 중 몇 개의 선택한 patch의 평균값을 구하여, 기준 값으로 변환시키는 변환 행렬을 구하고, 교정 값을 구하고, 교정된 24 patch 값의 평균과 기준 값과의 오차를 구하여 최소가 되는 변환 행렬을 구하였다. 이 방법은 컬러 챠트의 개수를 줄여 장치의 부피를 줄이는데 활용될 수 있다. 또한 이 방법은 외부의 빛이 차단된 촬영장치에서 활용되었지만, 조명조건이 안정된 개방된 공간에서도 스마트폰을 이용하여 촬영하는데 활용 가능할 것으로 예상된다.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.39-52
• /
• 2023

According to the core affect theory, affect consists of two independent dimensions of valence and arousal. Previous studies have found that various types of stimuli, such as pictures, videos, and music, are mapped onto the core affect space. However, the research on affect using gustatory stimuli has not been explored sufficiently. This study investigated whether the affects elicited by tastes could be mapped onto the core affect space. Stimuli were selected based on two factors (taste types and intensity). Participants were presented with each stimulus, evaluated the tastes, and rated their affective responses on taste and emotion scales. The data were analyzed using repeated-measures ANOVAs and multivariate analyses (multidimensional scaling and classification). The results of univariate analyses indicated that participants felt positive for sweet stimuli but negative for bitter and salty. Furthermore, participants reported high arousal with high intensity. Multidimensional scaling revealed that taste stimuli are also represented on the core affect dimensions. Specifically, it was confirmed that in the first dimension, sweetness was represented as a positive affect, while bitter and salty tastes were represented as a negative affect. In the second dimension, bitterness was represented as low arousal and sourness as high arousal. Classification analyses confirmed that the taste was identified consistently based on the affective responses within and across participants. This study showed that the taste stimuli in daily life are also located on core affect dimensions of valence and arousal.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.3
• /
• pp.113-123
• /
• 2016

In the present work, we investigated the effects of the carbon potential on the formation of carbide at the carburized surface and anti-pitting fatigue strength in the supercarburized steels. Two low carbon steels with different Cr concentrations were adopted and the repeated supercarburizing treatment carried out with the different carbon potential conditions. The microstructure and carbides at the supercarburized surface were observed by using optical microscope and scanning electron microscope. The microhardness test was performed and the hardness distribution and the effective case depth at the supercarburized surface were discussed. The roller pitting fatigue test was carried out and the fatigue strength was evaluated with different the carbon potential conditions. The microstructure of the fatigue specimen surface was observed by means of scanning electron microscope and scanning transmission electron microscope. Depending on the chemical composition of the steels and the carbon potential condition, the resistance of temper softening and pitting failure was influenced due to the carbide distribution and the formation of coarse network carbide. Thus, it was confirmed that the control of the carbide formation is a key factor to improve the anti-pitting fatigue strength in the supercarburized steels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.319-324
• /
• 2013

In this study, an EP (electro-polishing)-MAP (magnetic abrasive polishing) hybrid process was developed as a precision finishing process. To evaluate the characteristics of this EP-MAP hybrid process, a series of experiments were carried out using various working gaps, current densities, and electrolyte concentrations. As a result, $NaNO_3$ was found to be very suitable as the electrolyte of the hybrid process because there was no electrochemical reaction with the CNT-Co composite. Moreover, an increase in the magnetic flux density affected the liquidity of the electrolyte and prevented it from flowing into the CNT-Co composite powder. For that reason, the lower liquidity of the electrolyte increased the thermal energy on the surface of the workpiece.