• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.201-213
• /
• 2007

In this study, the Batter Assessment Science Integrating point and Nonpoint Sources (BASINS 3.0)/window interface to Hydrological Simulation Program-FPRTRAN (WinHSPF) was applied for assessment of Soyang Dam watershed. WinHSPF calibration was performed using monitoring data from 2000 to 2004 to simulate stream flow. Water quality (water temperature, DO, BOD, nitrate, total organic nitrogen, total nitrogen, total organic phosphorus and total phosphorus) was calibrated. Calibration results for dry-days and wet-days simulation were reasonably matched with observed data in stream flow, temperature, DO, BOD and nutrient simulation. Some deviation in the model results were caused by the lack of measured watershed data, hydraulic structure data and meteorological data. It was found that most of pollutant loading was contributed by nonpoint source pollution showing about $98.6%{\sim}99.0%$. The WinHSPF BMPRAC was applied to evaluate the water quality improvement. These scenarios included constructed wetland for controlling nonpoint source poilution and wet detention pond. The results illustrated that reasonably reduced pollutant loadin. Overall, BASINS/WinHSPF was found to be applicable and can be a powerful tool in pollutant loading and BMP efficiency estimation from the watershed.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.872-879
• /
• 2010

Layered copper hydroxides [LCHs, $Cu_2(OH)_3{\cdot}NO_3$] has the agricultural potentials as a fungicide because of its high crystallinity, excellent anion exchange capacity, and its regular layered particle size. The study, for the first time, has synthesized LCHs in highly concentrated solution and evaluated its physicochemical properties including the crystallinity and suspension stability. Optimal synthetic condition of LCHs was determined by crystallinity and stability of suspension as follow; 1) concentrations of $Cu(NO_3)_2$ and NaOH solutions were 3.0 M respectively, 2) reaction temperature and solution pH were $25^{\circ}C$ and 6.0, respectively, and 3) aging time after reaction was 2hr. Crystallinity of LCHs enhanced with increase in pH up to 9.0. Whereas, stability of suspension was decrease by increase in crystal size. Especially, increase in reaction temperature decreased stability of suspension. XRD patterns and SEM images exhibited that LCHs had regular layered particle size with 0.2~0.8 ${\mu}m$ and high crystallinity in optimal synthetic condition. The particle size was increased with increase in reaction temperature and pH. These results showed that LCHs synthesized in highly concentrated solution exhibited high stability of suspension as well as high crystallinity suitable to their potential as a fungicide.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.664-676
• /
• 2019

This study aimed to analyze the bioacoustics and habitat environment of the cicadas inhabiting Taebaeksan National Park, an sub-alpine region in Korea. The mating calls of the cicadas were recorded for approximately 3 months, between July and September of 2018. The recording devices were installed in Daedeoksan valley and Baekcheon valley, inside Taebaeksan National Park, and the sounds were recorded 24 hours a day. In order to obtain the habitat distribution data of the cicadas, the sounds were recorded from 111 spots located in the Taebaeksan National Park trail in August 2018. The daily weather data was obtained from the Taebaek city weather center. The results of the study demonstrated that 5 species of cicadas inhabit Taebaeksan National Park, namely, Leptosemia takanonis, Lyristes intermedius, Kosemia yezoensis, Hyalessa fuscata, and Meimuna opalifera. The time of appearance for L. takanonis was early July to mid-July, and that for L. intermedius, K. yezoensis, H. fuscata, and M. opalifera was mid-July to early September. Analysis of the circadian rhythm revealed that L. intermedius, K. yezoensis, and H. fuscata started producing mating calls between 6:00 and 7:00, which ended at around 19:00 for all the three species. The peak time for producing mating calls was 11:00 for L. intermedius, 12:00 for H. fuscata, and around 13:00 to 14:00 for K. yezoensis. The environmental factors influencing the mating calls of the cicadas inhabiting Taebaeksan National Park were analyzed by logistic regression. The results showed that the probability of producing mating calls increased by 1.192 and 1.279 times in L. intermedius and K. yezoensis, respectively, when the average temperature increased by one degree. When the duration of sunlight increased by one hour, the probability of producing mating calls increased by 4.366 and 2.624 times in L. intermedius and H. fuscata, respectively. Analysis of the interspecific effects revealed that when H. fuscata produced a single mating call, the probability of producing mating calls increased by 14.620 and 2.784 times in L. intermedius and K. yezoensis, respectively. When K. yezoensis and L. intermedius produced mating calls, the probability of producing mating calls in H. fuscata increased by 11.301 and 2.474 times, respectively. L. intermedius and K. yezoensis did not have any effects on each other with respect to the production of mating calls. Analysis of the habitat environment of each species revealed that their habitats were located at altitudes of 1,046 m (780~1,315 m) for L. intermedius, 1,072 m (762~1,361 m) for K. yezoensis, and 976 m (686~1,245 m) for H. fuscata. Unlike H. fuscata, which was found at a low altitude, K. yezoensis and L. intermedius were not found at altitudes lower than 700 m. Analysis of the average aspect of the habitats of each of the cicada species revealed that L. intermedius was found at 166° (125~207°), K. yezoensis was found at 100° (72~128°), and H. fuscata was found at 173° (118~228°). Examination of the distribution of each of the cicada species revealed that they were predominantly distributed in the ridges and slopes located in the southeastern region of Munsubong in Taebaeksan. In summary, L. intermedius and K. yezoensis was found to inhabit higher altitudes in Taebacksan National Park than H. fuscata, which was found throughout the Korean peninsula. Additionally, the main aspect of the cicada habitat was found to be the southeastern region (100~173°), which has good access to daylight.