• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.591-597
• /
• 2001

Ti alloy is used for essential parts of aircraft for high temperature environment. Although Ti alloy has excellent performance in regard to mechanical properties, it is difficult ot find fatigue cracks by nondestructive ultrasonic inspection due to its two-phase microstructure, which consists of hard alpha and beta phases. Sound energy reflected from microstructural features in the component produces a background inspection noise which is seen even when no defects are present. This noise can inhibit the detection of critical internal defects such as pores cracks or inclusions. To obtain fundamental data on ultrasonic inspection of Ti alloy, ultrasonic testing was performed using a specimen with small drill holes and ultrasonic wave propagation velocites were measured.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.584-595
• /
• 2011

Recently, RGB images and depth maps have been supplied to academic fields. The depth maps are utilized to the generation of stereoscopic images in the diverse formats according to the users' preference. A variety of methods that use depth maps have been introduced so far. One of applications is a medical field. In this area, the improvement of the perceptual quality of 2D medical images has gained much interest. In this paper, we propose a novel scheme that expands the conventional method to 3D stereoscopic image, thereby achieving the perceptual depth quality improvement as well as 3D stereoscopic perception enhancement at the same time. For this, contrast transformation as well as depth darkening are proposed and their performance is validated through the subjective test. Subjective experiments peformed for stereoscopic enhancement as well as visual fatigue validate that the proposed method achieves better 3D perception than the usage of the original stereoscopic image and suggests the limitation in terms of the visual fatigue.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.21-26
• /
• 2004

Color image quantization is a process of selecting a set of colors to display an image with some representative colors without noticeable perceived difference. It is very important in many applications to display a true color image in a low cost color monitor or printer. The basic problem is how to display 256 colors or less colors, called color palette, In this paper, we propose improved binary tree vector quantization based on spatial sensitivity which is one of the human visual properties. We combine the weights based on the responsibility of human visual system according to changes of three Primary colors in blocks of images with the process of splitting nodes using eigenvector in binary tree vector quantization. The test results show that the proposed method generates the quantized images with fine color and performs better than the conventional method in terms of clustering the similar regions. Also the proposed method can get the better result in subjective quality test and WSNR.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.4
• /
• pp.470-485
• /
• 2003

The steganography is one of methods that users can hide data. Some steganography softwares use audio data among multimedia data. However, these commercialized audio steganography softwares have disadvantages that the existence of hidden messages can or easily recognized visually and only certain-sized data can be hidden. To solve these problems, this study suggested, designed and implemented Dynamic Message Embedding (DME) algorithm. Also, to improve the security level of the secret message, the file encryption algorithm has been applied. Through these, StegoWaveK system that performs audio steganography was designed and implemented. Then, the suggested system and the commercialized audio steganography system were compared and analyzed on criteria of the Human Visilable System (HVS), Human Auditory System (HAS), Statistical Analysis (SA), and Audio Measurement (AM).

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.31-42
• /
• 2013

This paper proposes a photogrammetric rectification method based on Bayesian approach as a method that eliminates vertical parallax between stereo images to minimize visual fatigue of 3D contents. The image rectification consists of two phases; geometry estimation and epipolar transformation. For geometry estimation, coplanarity-based relative orientation algorithm was used in this paper. To ensure robustness for mismatch and localization error occurred by automation of tie point extraction, Bayesian approach was applied by introducing several prior constraints. As epipolar transformation perspective transformation was used based on condition of collinearity to minimize distortion of result images and modification for input images. Other algorithms were compared to evaluate performance. For geometry estimation, traditional relative orientation algorithm, 8-points algorithm and stereo calibration algorithm were employed. For epipolar transformation, Hartley algorithm and Bouguet algorithm were employed. The evaluation results showed that the proposed algorithm produced results with high accuracy, robustness about error sources and minimum image modification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1455-1462
• /
• 2012

As the size of a wind turbine increases, the mechanical structure has to have an increasing mechanical stiffness that is sufficient to withstand mechanical fatigue loads over a lifespan of more than 20 years. However, this leads to a heavier mechanical design, which means a high material cost during wind turbine manufacturing. Therefore, lightweight design of a wind turbine is an important design constraint. Usually, a lightweight mechanical structure has low damping. Therefore, if it is subjected to a disturbance, it will oscillate continuously. This study deals with the active damping control of a wind turbine tower. An algorithm that mitigates the mechanical loads of a wind turbine tower is introduced. The effectiveness of this algorithm is verified through a numerical simulation using GH Bladed, which is a commercial aero-elastic code for wind turbines.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.96-96
• /
• 2012

최근 주 5일제 근무 실행과 사회복지의 확산, 여가 선용에 대한 욕구와 더불어 건강증진에 대한 싸이클이 주목을 받고 있음. 싸이클웨어(Cycle Wear)에 요구되는 개발요소는 경기력 향상을 위한 기능적 요소와 패션성을 부여하는 심미적 요소로 크게 구분 가능하며 해외에서는 기능성과 패션성이 적절하게 조화를 이룬 제품을 계속 출시되고 있음. 본 연구에서는 운동 시 발생하는 열을 흡한속건 기능으로 효과적으로 발산하고 동절기에는 보온 기능을 갖는 세섬도 하이멀티 OY형 이형단면사 및 잠재권축사를 이용한 고신축 환편 및 경편물 개발하고, 극한환경에서도 고견뢰도를 유지할 수 있는 섬유의 염색법 및 기능성 발현 가공법의 적용, 내마모성과 필링이 우수한 아라미드+나일론 복합가공사 신축직물 제직 및 염색가공 공정 개발을 통해 기능성을 발현할 수 있는 싸이클 웨어 원단을 개발하였음. 또한 종래 Compression Wear에만 적용하던 테이핑 요법을 응용한 근력강화형 싸이클웨어 패턴과 디자인 개발을 통해 다양한 형태의 근력강화형 싸이클웨어를 개발하였으며, 무산소파워, 유산소파워, 젖산분석, EMG 분석 및 에너지 대사분석 등의 운동능력 성능평가를 통해 테이핑 요법이 적용된 싸이클웨어의 근력강화 효과를 확인하였음. 이와 같이 개발된 싸이클웨어는 무산소파워, 유산소파워, EMG 분석에서 각각 근력강화 효과를 보였으며, 피로물질인 젖산의 경우는 발생의 정도가 낮게 나타났음. 또한 여성에 비해 남성의 근력강화 효과가 크게 나타나는 경향을 보였음.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.95-95
• /
• 2012

기존의 섬유부자재 생산은 피도물의 접점(고리자국)으로 핀홀(pine-hole)에 녹의 발생하여 제품고급화가 어렵고 작업 시 분진 발생 및 유기물질 배출로 열악한 실정이다. 국내 생산방식은 대부분 위와 같은 방식으로 생산하고 있으나 이는 불량률이 높고 열효율이 떨어지는 단점이 있다. 기존의 저가제품은 중국 및 후발국가의 추격으로 세계시장에서 경쟁력을 잃어가고 있으며 선진국의 경우 섬유부자재의 고급화를 위한 무접점 대형코팅 설비 생산 및 연구개발을 하고 있는 실정이다. 이에 본 연구에서는 무접점 코팅설비의 개발로 피도물에 접점이 없어 녹발생의 원인인 핀홀이 근본적으로 발생하지 않으며, 일괄생산체제를 도입하여 기존의 작업방법 대비 생산성이 향상되고 불량률 및 에너지사용이 감소되며, 또한 원천적으로 분진 및 유기용제 등의 유해물질 배출이 없는 기술을 확보하고자 한다. 개발된 장비의 평가 및 실제 생산현장에서 요구되는 성능을 반영하기 위해 기존 생산설비를 조사하였고, 기존 작업환경에 따른 불량률 및 생산성을 조사하였다. 새로 개발되는 무접점 코팅설비는 기존의 문제점이 보완되며, 에너지 효율 향상 및 작업환경 개선된 One-stop 공정으로 설계하였으며 그 특징은 아래와 같다. 도료 코팅을 위한 파우더 공급 및 제거 공정의 단일화로 생산성을 향상 시키면서 기존보다 분진발생이 거의 없는 도입부 개발 및 밀폐형 코팅부 도입을 통하여 불필요한 열원 낭비를 최소화 시킬 예정이다. 향후 개발된 각 단위 유닛의 최적화를 통한 생산성 향상 및 One-stop 공정에 따른 열효율 개선 및 에너지 사용 절감 효과를 알아보고 피드백하여 최종 개발품에 적용할 예정이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3416-3422
• /
• 2014

A shock absorber rod is located in the center of the absorber piston and is responsible for the reciprocating movement portion. If it has surface defects, the damping performance of product will be adversely affected. A rod surface has gloss by heat treatment. Therefore, it is difficult to find a defect, such as dust, imprints, and blowholes. Because a total inspection is achieved by visual inspection by workers, it causes eyestrain and the quality of the product is not constant. In this paper, a machine vision system was developed to find a defect using a line-scan camera. The machine can detect surface defects than 0.3mm. To minimize the occurrence probability of defects on the inspection process, the developed auto inspection system had an automatic feeding system and incorporated a protection system. Through the development of this system, which relies on the operator's visual inspection of the surface of the shock absorber, the Rod inspection system constructed quality inspection standards and standardized tests to ensure improved reliability.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.481-491
• /
• 2009

In this paper, we proposed a hybrid P2P overlay structure for live media streaming. The proposed structure consists of the mesh overlay organized by peers according to the geographical proximity and similar bandwidth range and the tree overlay formed by the peers for which the stability of participation is approved. The proposed scheme enhances the robustness of tree overlay and the long delay of mesh overlay by intelligently combining the utilization of the tree overlay and the mesh overlay. Furthermore, the peers with a large up-link bandwidth are located near to the media source peer. Therefore, it reduces the height of tree, and as a result, the stream transmission delay. Through simulation, we evaluated the performance of the proposed scheme in terms of scalability and quality of services.