• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.6
• /
• pp.289-300
• /
• 2001

본 논문에서는 유한 필드 GF(2$_{m}$ ) 상에서 모듈러 곱셈 A($\chi$)B($\chi$) mod P($\chi$)을 수행하는 새로운 선형 문제-크기(full-size) 시스톨릭 어레이 구조인 LSB-first 곱셈기를 제안한다. 피연산자 B($\chi$)의 LSB(least significant bit)를 먼저 사용하는 LSB-first 모듈러 곱셈 알고리즘으로부터 새로운 비트별 순환 방정식을 구한다. 데이터의 흐름이 규칙적인 순환 방정식을 공간-시간 변환으로 새로운 시스톨릭 곱셈기를 설계하고 분석한다. 기존의 곱셈기와 비교할 때 제안한 곱셈기의 면적-시간 성능이 각각 10%와 18% 향상됨을 보여준다. 또한 같은 설계방법으로 곱셈과 제곱연산을 동시에 수행하는 새로운 시스톨릭 곱셈/제곱기를 제안한다. 유한 필드상의 지수연산을 위해서 제안한 시스톨릭 곱셈/제곱기를 사용할 때 곱셈기만을 사용 할 때보다 면적-시간 성능이 약 26% 향상됨을 보여준다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.235-236
• /
• 2017

소수력발전소가 건설 후 점검 및 유지보수를 지속적으로 수행 설비성능을 유지하지만, 30년이 경과하면 노후화 및 피로현상으로 성능이 저하되고 경제적 내용연수가 도래한다. 대수력의 경우 전문인력과 점검 및 보수비용을 투자하여 일상, 주간, 월간, 년간, 정기보수를 수행하고 그 기록을 유지관리하고 있지만, 소수력발전소의 경우는 그러하지 못하여 발전소 효율뿐만 아니라 운용중의 안전도 위협받고 있는 상황이다. 본 논문에서는 국내 시설물 안전관리에 관한 특별법에 의거 필리핀에 위치한 노후 수력발전소의 현대화를 위하여 최초 기존 시설물에 대한 안전진단을 실시하여 토목 및 건축물의 보강을 위한 방법을 선정하고 이를 바탕으로 수력발전설비로부터 발생하는 진동과 같은 다양한 영향을 감소시키기 위한 토목기술을 반영하여 현지 환경에 적합한 수차선정과 노후 시설물의 유지보수를 국내 토목 보수 보강 기술로 설계하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.18-19
• /
• 2024

High Dynamic Range 는 디지털 카메라에 내장된 영상 보정 장치인 Image Signal Processor 의 주요 기능 중 하나로서, 영상의 밝고 어두운 정도의 범위를 넓혀, 피사체가 더 또렷하게 보이도록 한다. 초당 수십 프레임을 촬영하는 경우, 실시간 보정처리를 위해 ISP 에 사용되는 기능 및 알고리즘은 신속성과 효율성이 요구된다. 본 연구는 ISP 에 적합한 HDR 알고리즘을 선정을 목표로 하여, Histogram Equalization 과 Contrast Limited Adaptive Histogram Equalization 을 소개한다. 이어 해당 알고리즘들을 컴퓨터 프로그래밍으로 구현, CMOS 이미지 센서를 통해 추출한 raw image 를 보정하여 각 알고리즘의 성능을 검토하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.106-115
• /
• 2011

This study proposed a new methodology for seismic capacity evaluation of low-rise reinforced concrete (RC) buildings based on non-linear required spectrum. In order to verify the reliability of the proposed method, relationships between results obtained using the proposed method and the non-linear dynamic analyses were investigated. Compared with the seismic protection index (Es=0.6) defined in the Japanese Standard, the applicability of the method was also estimated. Research results indicate that the method proposed in this study compares reasonably well with the detailed evaluation methods. Using the seismic evaluation method developed in this study, the seismic capacity category and earthquake damage degree of low-rise RC buildings corresponding to a specific earthquake level can be effectively estimated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.56-65
• /
• 2016

In this paper, in order to reduce the delay and area of the partial product accumulation (PPA) of the parallel decimal multiplier, a tree architecture that composed by multi-operand decimal CSAs and improved CLA is proposed. The proposed tree using multi-operand CSAs reduces the partial product quickly. Since the input range of the recoder of CSA is limited, CSA can get the simplest logic. In addition, using the multi-operand decimal CSAs to add decimal numbers that have limited range in specific locations of the specific architecture can reduce the partial products efficiently. Also, final BCD result can be received faster by improving the logic of the decimal CLA. In order to evaluate the performance of the proposed partial product accumulation, synthesis is implemented by using Design Complier with 180 nm COMS technology library. Synthesis results show the delay of the proposed partial product accumulation is reduced by 15.6% and area is reduced by 16.2% comparing with which uses general method. Also, the total delay and area are still reduced despite the delay and area of the CLA are increased.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.19-26
• /
• 2006

This paper presents a novel pneumatic tactile display that can deliver some useful information. The air-jet display forms 5 by 5 arrays and features air nozzles with an external diameter of 2.4mm and internal diameter of 1.5 mm. In comparison with other tactile displays such as vibrotactile, there is little concrete psychophysical data relating to pneumatic displays, a fact which hinders their adoption. This paper addresses this challenge, and presents brief psychophysical studies examining localization rate, the two point threshold, stimulus intensity and the temporal threshold of cues produced by pneumatic air jets. Two groups of subjects were used in these studies, subsequently termed groups A and B. Both were comprised of eight participants. In the case of localization study we obtained 58.13% and 85.9% of localization rates each for dense display and sparse display. Two-points threshold test showed the length of gap between two air-jet stimuli which subjects can detect. However, it was formidable to find out precise temporal resolution of PTI owing to the limitation of capability of the pneumatic valves. Lastly, the results of stimulus intensity study suggest that by varying the size of a pneumatically created tactile stimulus, we can effectively vary its perceived magnitude.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.385-386
• /
• 2010

The ship's seakeeping performance in the pitching and roll motion was felt tired. These gives structural loads to loaded with cargo and hull facilities. Be to improve, small catamaran power yacht designed a data for ship research and ship's hull form to be decided. In this study, based on domestic release for coastal marine environment in the interpretation criteria were chosen based on the exercise performance. The seakeeping performance of marine leisure catamaran was based on voyage speed. The seakeeping performance estimates based on the encounter angle, the wave of the encounter frequency response amplitude ratio for exercise was assessed in the high performance area.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.262-269
• /
• 2023

Purpose: In this study,fire-resistance test were executed to evaluate the effectiveness of the fireproof panel attached to the PSC slab in tunnel. Method: For the fire resistance test, the RWS curve was applied and the furnace of the KICT was used. Result: As a result of the experiment, the maximum temperature measured on the concrete surface of the PSC slab with the fireproof panel was 321.8℃, which was lower than the damage limit temperature of 380℃ for concrete. Also, at the t=25mm, the maximum temperature was 35.2℃, which was lower than the damage temperature of steel, 250℃. The use of precast fire resistance panel(t=30mm) improves fire resistance of PSC structures. Conclusion: As a result of the test, a reinforcement method for attached a fireproof panel in case of fire in a tunnel or an underground roadway is provided to protect a structure from fire. In the future, it is necessary to perform the static performance test of the slab to which the fireproof panel is attached, and to confirm the adhesion performance of the fireproof panel by performing the pull-off test and the fatigue test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.112-118
• /
• 2011

The recycled asphalt concrete has gotten increasing attention due to the environmental issues. The volume of reclaimed asphalt has increased significantly for last few years because of city remodeling, pavement maintenance, utility excavation, and road widening. Considering the value of reclaimed asphalt, it is rather used for the recycled asphalt concrete than it is used for fill and cover up material instead of soil. This research will be a supplements incomplete issues from existing research results and suggests the quality control guideline for recycled asphalt concrete and upcoming laws. As the first step of research, the trial construction of RAP(Recycled Asphalt Pavement) performed in expressway construction sites. These trial construction sites have been checked every years. And another construction sites studied and selected for more deeper performance check of RAP. For this checks, we used automatic pavement survey equipment and computerized analysis tools. Also, DSR(Dynamic Shear Rheometer) was used for the fatigue life calculation of binder blends(RAP and virgin binder). As a consequence of this research, the application of recycled asphalt provides good enough quality for highway construction. The preceeding literatures reviewed shows that the asphalt rejuvenator are used in many countries but that type of chemical agent are not used in Korea. By using the data of trial construction and mix design in Chongwon-Sangju construction lane, the surface and base courses consisted with the 10% and 30% rap mix asphalt section maintains good performance for up to 7 years. Through the performance check and laboratory tests(DSR), the quality control and mixture's low temperature prevention are the important factor and chemical agent necessary for increasing the fatigue life of RAP binder.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.93-102
• /
• 2005

Manufacturing conventional column base plate requires much manpower and time. In this research, a new method for constructing column base plate is introduced to improve on conventional methods through the use ofcast steel that is available for adjusting base plate thickness and enlarging base plate stiffness. The main purposes include reducing welding work, enlarging base plate stiffness, and clarifying the stress flow. Also, construction convenience and improvement in quality can be expected. For developing this cast steel base plate, test specimens of conventional and cast steel base plates are made and tested to analyze strength and stiffness. Also, the efficiency for long-term use is checked by fatigue tests. From these comparative tests, cast steel base plates have the same strength and stiffness as conventional base plates.