• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.141.1-141.1
• /
• 2005

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.181-186
• /
• 1999

반복하중에 따른 P.C 구조물의 장착장치로 사용되는 Wedge 형상에 따른 거동특성을 파악하기 위하여 정적최대하중을 이용하여 피로시험을 수행하였다. 또한 피로시험 결과로부터 반복회수에 따른 시험 체의 균열양상, 하중-변위, 하중-변형율, 하중-중앙 최대 변위, 하중-영구 변형량, 반복횟수에 따른 S-N선도 등을 고찰하였다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.199-203
• /
• 1989

본 연구에서 제작된 시험기는 연구자 개인의 경제적 수준에서 충분이 제작이 가능한 것이다.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.34-45
• /
• 1989

성장하는 균열에 의한 변형 에너지해방에 기반을 둔 간단한 파괴역학적인 접근법이 고무의 여러가지 특성을 규명하는데 성공적으로 응용되는 예들을 논의하였다. 이 방법은 전통적인 강도, 즉 찢김, 균열성장, 피로, 인장파손 등 뿐만 아니라 오존내습(ozone attack), 예리한 공구들에 의한 마쇄, 절단현상을 규명하는데도 응용가능함을 밝혔다. 특히 에너지해방율은 여러가지의 다른 시험편에 대한 실험값들이 서로 연관성을 갖도록 허용하기 때문에 매우 유용한 특성이라 할 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.158-165
• /
• 2003

The object of this work is to develop an assessment system for pipeline integrity. The internal algorithm and the database of the system are described in this paper. The system consists of four module applications; the effect of corrosion in pipeline, crack, SCC (stress corrosion cracking) and fatigue module. The database of the system is separated to mainly four parts; geometry of pipeline, material properties, boundary condition and general properties. This system may give a guideline for maintenance and modifications.

• Journal of the KSME
• /
• v.30 no.2
• /
• pp.107-114
• /
• 1990

(1) Cr-Mo-V 합금강 로우터재료는 사용도중 템퍼 취화된다. 템퍼취화된 소재는 취성제거처리 혹 은 재열처리를 하여 취성을 감소시킬 수 있다. (2) 축의 신뢰도를 파괴역학 원리를 적용하여 계산하였으며 템퍼 취화된 소재는 파손 위험성이 있으나 열처리 된 소재는 취성파괴 및 고 사이클 하중에 의한 피로균열 성장에 대해서 안전성 이 충분하다는 결론을 얻을 수 있다. (3) 샬피 V-노치 충격치 (CVN)와 파괴인성치(K$_{tc}$ )의 관계식을 취성재료에도 적용할 수 있 는가의 여부에 대해서는 많은 조사가 필요하다. (4) 취성소재의 피로균열 개시값$\Delta$ $K_{th}$을 알고 있으면 취송소재로 제조된 구조물의 파괴역학적인 해석을 하는데 도움을 줄 수 있다.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.495-499
• /
• 2005

Fatigue behavior of reinforced concrete(RC) elements has been experimentally and analytical investigated. Fatigue behavior is influenced by a longitudinal reinforcement ratio, strength of concrete and a load ratio Pu/Po. The purpose of this study to propose an empirical formula for the fatigue behavior on the basis of experimental results. Also an analytical method to predict the crack propagation of RC beams has been developed based on the relationships between bond stress and slip.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.65-69
• /
• 2000

This study is to investigate the characteristics of fatigue crack propagation in rolled super duplex stainless steel that was changed austenite-ferrite volume fraction by heat treatment. It was used two kinds of specimen the rolling and the transverse directions δ-phase fraction affected sound velocity hardness and Young's modulus. Characteristics of fatigue crack propagation was affected by anisotropy and (δ+γ) phase volume fractions.

• Composites Research
• /
• v.14 no.3
• /
• pp.1-9
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue life of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the 90-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminates. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[{90}_2/0_2]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1227-1234
• /
• 2012

In this study, fatigue tests were carried out using real-scale pipe bend specimens with wall-thinning defects under a cyclic bending load together with a constant internal pressure of 10 MPa. The wall-thinning defect was located at the extrados and the intrados of the pipe bend specimens. A fully reversed cyclic in-plane bending displacement was applied to the specimens. For the pipe bends with wall thinning at the extrados, an axial crack occurred at the crown of the pipe bend rather than at the extrados where the defect was located. In addition, the fatigue life was longer than that of a sound pipe bend predicted from the design fatigue curve in ASME Sec.III, and it was less dependent on the axial length of the wall-thinning defect. For the pipe bends with wall thinning at the intrados, a circumferential crack occurred at the intrados. In this case, the fatigue life was much shorter than that of a sound pipe bend predicted from the design fatigue curve, and it clearly decreased with decreasing axial length of the wall-thinning defect.