• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.4
• /
• pp.11-21
• /
• 1982

The dynamic strain-time(${\varepsilon}$-t) curves of the fatal members in three existing steel railway bridges was measured during the selected trains was passing, and was regulated statistically. By the results of these the equivalent fatigue damages of the selected members was calculated in comparison with the allowable stresses, and was examined. From these the base available in evaluating the stability and the lifeproof of the steel railway bridge was obtained. In addition to this, the following several properties which could be used availably in designing the steel railway bridges. It was conformed that the fatigue damages was different each other even in the same members, if the unit weight of the trains was same but the weights and the dispositions of the wheels of the trains was different each other. It was indicated that the fatigue damages was larger in the members which had the defects in components of the materials, the flaws being made during producing and constructing, and the corrosions, etc. It was considered that more a vailable data could be obtained, if the same studies were continued under the spans and the types of the bridges being changed continuously.

• Journal of the KSME
• /
• v.16 no.1
• /
• pp.30-36
• /
• 1976

본강좌(II)에서는 종래에 제안된 피로기구와 이론의 개요를 소개함으로서, 구조용 재료의 강도 및 복잡성을 살펴보기로 하겠다. 기계적인 각종의 원칙 및 이론은, 피로를 동반한 기계적, 금속적 또는 물리적 현상중에 어느 하나의 현상에 대해서만 적응되고 또 이론이 적용되는 영역도, 재 료에 가해지는 응력의 고저를 고려하면 피로한도근방에, 또는 피해가 발생하는 영역 그리고 소성피로를 발생시키는 영역에만 제한된다. 따라서 이와 같은 사항들을 전부 고려한 통일된 피 로기계 및 이론은 아직 찾아볼 수는 없으나, 피로를 이해하는데 초보자에게는 도움이 될 것이 라고 인식되기에, 우선 종래에 발표된 피로에 대한 각종 이론 및 구조들 중에 중요하다가 생 각되는 몇 가지만을 간추리고 그 개요를 다음과 같이 간단히 소개하기로 했다.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.149-158
• /
• 2000

After measuring actual stress by two measurements(Dynamic Strain Meter, Histogram Recorder) on truss rail road bridge, we could perform time history analysis by 3-D beam element method on modelling bridge. And then, after analyzing bridge structure in static by 3-D modelling, we estimated degree of fatigue damage in main member, secondary member of tie zone, cutting area of base metal cross section for confirming the result. In case that the simulated stress is carried out on modeling bridge, most of those simulation mainly is performed by main members. But in real bridge fatigue damage problems generally caused by junctions, connections, joints in which especially local stress is activated. Therefore, in this paper actual stress on critical area was estimated through the analysis result by simulation. With this study, we can estimate the degree of fatigue damage from a safety point of view and comparative accuracy.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.313-320
• /
• 1999

Steel railway bridge gets vibration from moving load ; additionally, this kind of moving load is going to be a sufficient reason, which causes fatigue damage to steel railway bridge. Fatigue damage and stress curve were raised by moving load depends on span length in steel railway bridge. In other words, stress curve appears index regarding every axial load in short span, but self weight lets stress curve's change decrease in proportion to increasing span length. Thereby, we have studied that how the steel railway bridge appear fatigue damage in proportion to span length of steel railway bridge. Dynamic strain was measured in 4 steel plate-girder railway bridge during the trains was passing, which is located on the line of Kyoung-chun railway. And time history response analysis has been done in order to ensure actual survey. The results of this study show the decreased of the fatigue damage in steel railway bridge according to length of span. This paper ends is bases research of fatigue design in steel railway bridges according to span length.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.301-308
• /
• 1985

본 논문에서는 불규칙 하중을 받는 부재에 대한 연구의 고초로서 간단한 응력 모델을 설정하고 이들 변동응력이 가해지는 시기를 명확히 구분하여 크랙전파곡선의 거동을 고찰하였다. 특히 부하되는 응력 진폭의 크기에 따라서 크랙선단부의 미시적 인 변화의 크기가 다르고 이로인하여 크랙전파에 대한 피해의 정도가 달라진다고 하면 크랙전파의 지연 및 가속현상이 나타날 것이 예측이 되고 따라서 이때 나타나는 피해 정도의 크기를 미소 경도치로 환산하여 그것과 피로크랙 전파 특성과를 비교 검토 하 였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.577-582
• /
• 2010

The importance of maintenance of rail surface defects is increasing according to the KTX operation. That is because during high speed operation of rolling stocks, rail surface defects shorten fatigue life of rail, accelerate track degradation and deteriorate ride comfort. Rail grinding has been applied for effective rail maintenance in Kyeong-Bu HS line. This paper evaluates the effectiveness of rail grinding in term of rail fatigue life. To this end, the stresses of the rail are measured under KTX running and the equivalent stress range is calculated by RMC after the frequency analysis done with rainflow counting method. Also, The Modified Miner's rule is applied to predict the fatigue life of ground rail. The result of the analysis shows that the fatigue life of ground rail is increased by 15%.

• The Science & Technology
• /
• v.29 no.5 s.324
• /
• pp.71-75
• /
• 1996

아프거나 피로를 느낄 때 말 또는 신음소리로 호소하듯 다리나 건물도 지나친 피로가 겹치거나 무너질 정도의 압력이 걸리면 스스로 이런 위급사태를 알리는 방법은 없을까? 지진이 일어날 때 스스로 보강하고 금이 가면 자발적으로 틈새를 메우는 다리나 건물을 만들 수는 없을까? 또 생물처럼 필요하다면 스스로 구조를 바꾸고 피해를 입으면 수리하고 나이를 먹으면 우아하게 은퇴할 수 있는 구조물을 만들 수 없을까? 21세기에는 이런 살아있는 지능재료들이 등장하여 성수대교와 삼풍백화점과 같은 대형구조물의 붕괴사건을 미리 막을 수 있게 될지 모른다.

• 방재와보험
• /
• s.115
• /
• pp.70-71
• /
• 2006

유난히 길었떤 장마 끝이 지나가고 여름철 무더위도 한풀 꺾였다. 이번 수해로 많은 피해를 입은 이웃들은 복구 작업에 아직도 구슬땀을 흘리고 있을 것이다. 여름철 무더위에 가장 조심해야 할 것은 고온에 의한 열손상이다. 여름철이면 흔히 '더위 먹었다'고 표현하는 사람들이 늘어난다. 주로 호소하는 증상은 피로감과 짜증, 무기력, 집중력 장애, 식육부진, 두통, 어지러움 등이다. 이러한 증상들은 다른 질병의 초기 증상일 가능성도 있지만 흔한 원인 중 하나가 바로 과로와 더위로 인한 신체리듬의 장애라고 할 수 있다. 이것을 일시적인 증상으로 자연 회복이 되는 경우도 있지만 반드시 적절한 도움을 받아야 하는 경우도 있다. 열경련, 열피로, 열사병 등 고온에 의한 열손상에 대해 알아보자.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.281-294
• /
• 1997

Fatigue strength analysis is one of the most important themes of ship structure design, as fatigue damages are reported on ship structures even now. But these need basic research workes which will take time. The others are the problem to apply fatigue strength analysis in design and have to be investigated in parallel with basic researches. The one of major items in the latter is the critical damage factor to define with S-N curve for fatigue strength analysis of ship structure design.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.279-284
• /
• 2015

The vibration happened at the revolution movement of driving shaft driven with the thrust of airplane affects the great influence on the life of the shaft. And a great loss of life is caused when the fatigue damage is occurred at the driving shaft during revolution. The chattering is occurred at the driving shaft placed at the various revolution due to the aviation environment. Therefore, the part of the driving shaft concerned about the fatigue damage is grasped through the analysis study in this paper. So, the durability to prevent damage can be improved and it is possible to be grafted onto the convergence technique on the basis of a recent safe design and show the esthetic sense.