• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.931-935
• /
• 1991

본 연구에서는 유효응력확대계수로서 피로크랙 진전수명을 평가할 수 이용되 는 크랙열림비(본 논문에서는 후술하는 최대응력에 대한 크랙 열림응력의 비를 크랙 열림비로 하다)가 진전수명에 미치는 영향을 평가하기 위한것으로서, 제1보에서는 실 험에 의하여 크랙 열림점을 실측한 결과 측정입치에 따라 다른 값을 나타내며 수명평 가법 크랙 선단으로부터 떨어진 곳(크립게이지를 이용한 크랙마우스등)에서 측정한 크 랙 열림점 값을 이용함이 보다 정확함을 밝혔다.본 제2보에서는 크랙열림비가 수명 평가에 미치는 영향을 상기의 파라미터 영향도 평가수법을 이용하여 평가하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.138-144
• /
• 1990

In order to understand the probabilistic nature of fatigue crack propagation, not only the calculation of failure probability and parameter sensitivity, but also the clarification of probabilistic nature of various parameters should be executed. Therefore a method to evalute synthetically the effect of each parameter on the distribution of fatigue crack propagation life is required. In this study, the effects of the initial crack size and other paramaters on the distribution of fatigue crack propagation life are discussed according to the appropriate normalization of the life distribution, the validity of this method is also shown. Such an investigation as the present work may be useful to understand the nature of the life distribution and to utilize the probailistic fracture mechanics.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1635-1639
• /
• 1991

본 연구에서는 제1보에서의 수법을 이용하여 초기크랙길이의 분포를 고려한 재료의 불확정성 평가수법을 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.907-915
• /
• 1991

본 연구에서는 피로 크랙 발생 및 파단수명의 통계학적 분포특성을 명확히 하 기 위해서 단축인장을 받고, 크랙 선단 곡율반경이 일정한 중앙 크랙을 가진 81개의 시험편을 사용하여 4개의 응력 레벨하에서 피로 시험을 행한후 많은 데이터들로 부터 피로크랙의 발생, 파단특성에 대한 신뢰성 있는 통계학적 확률특성을 제시하고, 이들 데이터를 활용하여 수명예측을 행해보고저 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2495-2500
• /
• 1994

A method of prediction for the fatigue life of surface crack, that is, initial cracks grow and penetrate through the thickness, was presented in the previous study of the author. Effects of parameters such as the initial crack length, material factors, etc., for the life were discussed. In this paper, the probabilistic distribution of the life is calculated. Effects of the distribution of parameters for the distribution of life were also discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.46-50
• /
• 1993

The sensitivity study to evaluate the effects of parameters on the fatigue crack propagation life under the constant loadings is executed in the previous study of the authors. It is shown that the effect of the crack opening ratio is large comparatively. The purpose of this paper is to evaluate the effects of parameters on the fatigue crack propagation life under the random loadings. A new method of evaluation of the effective stress under the random loadings is developed. The sensitivity study of parameters on the fatigue crack propagation life under the random loadings is executed by using it.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.921-927
• /
• 1989

One of the most important problems in recent life prediction is to introduce the degradation effects into life prediction procedure. In the present paper, the effect of the material degradation on the fatigue surface crack growth and fatigue life prediction in a 2 1/4 Cr-1Mo steel were investigated. The 2 1/4 Cr-1Mo steel has been used in a plant having operated for over 60000hours and subjected to material degradation due to temper-embitterment. A Monte-Carlo simulation was made on the basis of the data obtained in the experiment in order to determine the P-S-N diagrams of surface crack growth for the degraded and recovered steels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1583-1591
• /
• 1990

Life prediction and residual life prediction of structures of machines are one of the most strongly world wide needed problems as requirement in the stage of slowly developing economy which comes after rapidly and highly developing stage. For the purpose of statistical life prediction, fatigue test was conducted under the 4 stress levels, and for each stress level, about 20 specimens are used. The statistical properties of crack growth parameter m and C in the fatigue crack growth law of da/dN=C(.DELTA.K)sup m/, and the relationship between m and C, and the statistical distribution pattern of fatigue crack growth rate can be obtained by experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.820-825
• /
• 1994

It is improtant to examine life or crack propagation behavior of structures because of its safety evaluation. The purpose of this study is to investigate the effect of crack-crack interaction to evaluate fatigue life and crack behavior. In this study, the behavior of the interaction of two cracks is studied by experiment. The vertical distance of two cracks is varied to make different interaction stress field. In addition, the effect of plastic zone is considered to examine crack propagation path and propagation rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1561-1567
• /
• 1990

Recently, some reports of experimental research on the distribution of fatigue crack propagation rate have been published, and the reliability evaluation using the results of research for the mechanical structure has been executed. Since the thicknesses of specimens used in the published reports are limited to the thin ones, the applicability of the results into the mechanical structure with another thickness seems to be doubtful. That is, not only the quantitative evaluation, but also qualitative evaluation of the effect of specimen thickness has not been executed. In this study, an experimental investigation has been done by using the new type automated multi-stage fatigue testing machine which was developed by the author. The influence of specimen thickness for the distribution of fatigue crack propagation rate with the results is discussed.