• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.51-52
• /
• 2016

최근 360 및 VR(Virtual Reality) 영상의 구성 및 전송을 위해 Facebook이 기존 메르카토르도법을 사용하는 것 대신 "Transform"의 방법을 제시하여 큐브 및 피라미드 형태로의 이미지 전송하는 방식을 발표했다. 본 논문은 이 변형기법을 기반으로, 6개의 카메라로 360VR영상을 촬영할 경우 "Transform"이 가지는 큐브 형태를 이용 기존보다 효과적이고 가벼워 실시간 스트리밍에 적합한 360VR이미지 변형법을 제안한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.223-227
• /
• 2009

$BaCO_3$ crystals with various morphology were prepared using precipitation, hydrothermal and ligand-assisted methods. An irregular structure of $BaCO_3$ microparticle was obtained by simple precipitation method from $Ba(NO_3)_2$ and $Na_2CO_3$ in aqueous solution. Hexagonal pyramidals of $BaCO_3$ were synthesized using a hydrothermal method between $Ba(NO_3)_2$ and urea. Hexagonal rods of $BaCO_3$ were also synthesized using the ligand-assisted hydrothermal method. The aspect ratio of $BaCO_3$ hexagonal rods was increased with the concentration of ligand.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.231-242
• /
• 2014

It is throwing the spotlight on the cultivation crops about high quality crops and productivity improvement per unit area because of rapid climate change caused by global warming. Therefore, we propose a water culture management of circulation nutrient method control system applies to solar tracking method not using traditional method of deep flow technique and artificial light source. We design it in the form of the circulation nutrient method in waterway of a certain amount of nutrient solution and water flowed into the way of circular. In addition, we design a multistage structure in pyramid shape which be possible continuous photosynthesis action to crops of water culture bottom part. Also, solar tracking method is designed five sensor method of center hole sensor method for tracking shadow of solar light not using traditional two hole, four hole sensor method. Finally, through the water culture device applies to solar light tracking method was not introduced in existing study yet, we can reduce growth speed of crops which be possible continuous photosynthesis action to crops. Moreover, We can expect high productivity of per unit area which be possible all crops can be offered growth environment of same type by using form of pyramid shape of multistage structure without top or bottom part.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.51-59
• /
• 1991

Early stage of GaAs nucleation on Si substrate was theoretically studied by computer simulation. Compared to the constant ledge interaction energy in conventional nucleation theory, functional behavior of ledge-ledge interaction resulted in small size clusters depending on the cluster size and shape. Among various kinds of clusters, the multilayer pyramidal shape GaAs cluster requires smallest excess free energy due to the formation of Ga(111) facet planes. There this result suggests that the defects involved in GaAs/Si are originated from the early stage nucleation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.47.2-47.2
• /
• 2010

For reducing outer reflection in mono-crystalline silicon solar cell, wet texturing process has been adapted for long period of time. Nowadays mixed solution with potassium hydroxide and isopropyl alcohol is used in silicon surface texturing by most manufacturers. In the process of silicon texturing, etch rate is very critical for effective texturing. Several parameters influence the result of texturing. Most of all, temperature, process time and concentration of potassium hydroxide can be classified as important factors. In this paper, temperature, process time and concentration of potassium hydroxide were set as major parameters and 3-level test matrix was created by using robust design for the optimized condition. The process optimization in terms of lowest reflection and stable etch rate can be traced by using robust design method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.228-237
• /
• 2007

displacement mapping enables us to add realistic details to polygonal meshes without changing geometry. We present a real-time artifacts-free inverse displacement mapping method. In each pixel, we construct a ray and trace the ray through the displacement map to find an intersection. To skip empty regions safely, we traverse the image pyramid of displacement map in top-down order. Furthermore, when the displacement map is enlarged, intersection with bilinear interpolated displacement map can be found. When the displacement map is at distance, our method supports mipmap-like prefiltering to enhance image quality and speed. Experimental results show that our method can produce correct images even at grazing view angles. Rendering speed of a test scene is over hundreds of frames per second and the influence of resolution of displacement map to rendering speed is little. Our method is simple enough to be added to existing virtual reality systems easily.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.749-755
• /
• 2019

In this study, we investigated the effects of tube voltage (kVp) and tube current (mAs) on an exposure index (EI) applied to a digital radiography. There used an inverter type digital X-ray generator and an image receptor (IR) utilized a portable wireless detector without a grid. Radiographic images were acquired using a cone pyramid phantom produced using a 3D printer. The X-ray tube voltage was increased from 40 kVp to 120 kVp with 10 kVp increment, and the tube current was increased from 1 mAs to 128 mAs with the twice increment. As a result, kVp had logarithmic relationship with the EI as high $R^2$ value, and mAs had a very high linear relationship too. Also, there was a high correlation between the area dose and the EI of the IR, with the $R^2$ value being 0.76 or more. In conclusion, it had showed that mAs affected the EI linearly, and that it could be advantageous to adjust the easy-to-predict mAs to maintain proper image qualities.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.226-233
• /
• 2008

The nucleation and evolution process of Ge nano-islands on Si(001) surfaces grown by chemical vapor deposition have been explored using atomic force microscopy (AFM). The Ge nano-islands are grown by exposing the substrates to a mixture of gasses GeH4 and H2 at pressure of 0.1-0.5Torr and temperatures of $600-650^{\circ}C$. The effect of growth conditions such as temperature, Ge thickness, annealing time on the shape, size, number density, and surface distribution was investigated. For Ge deposition greater than ${\sim}5$ monolayer (ML) with a growth rate of ${\sim}0.1ML/sec$ at $600^{\circ}C$, we observed island nucleation on the surface indicating the transition from strained layer to island structure. Further deposition of Ge led to shape transition from initial pyramid and hut to dome and superdome structure. The lateral average size of the islands increased from ${\sim}20nm$ to ${\sim}310nm$ while the number density decreased from $4{\times}10^{18}$ to $5{\times}10^8cm^{-2}$ during the shape transition process. In contrast, for the samples grown at a relatively higher temperature of $650^{\circ}C$ the morphology of the islands showed that the dome shape is dominant over the pyramid shape. The further deposition of Ge led to transition from the dome to the superdome shape. The evolution of shape, size, and surface distribution is related to energy minimization of the islands and surface diffusion of Ge adatoms. In particular, we found that the initially nucleated islands did not grow through long-range interaction between whole islands on the surface but via local interaction between the neighbor islands by investigation of the inter-islands distance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.169-174
• /
• 1996

객체 인식은 대용량의 영상 데이터를 분석, 탐색하고 재구성하기 위한 내용기반 영상 검색의 매우 중요한 분야이며, 특히 인간의 얼굴은 검색 영상 내에서 대부분 주요한 장면에 위치하고 있기 때문에 그 비중이 매우 크다. 본 논문에서는 내용기반 영상 검색을 위한 실시간 얼굴 영역 추출 방법을 제안한다. 제안된 방법에서는 다층 피라미드 구조와 간단한 형태의 머리 형판을 사용하여 얼굴의 후보 영역을 추출한 후, 보다 정확한 얼굴 영역을 추출하기 위하여 후보 영역 내에서 눈의 위치를 탐색하고, 두 눈의 위치를 기준으로 최종적인 얼굴 영역을 추출하였다. 얼굴 후보 영역 추출 단계에서는 얼굴의 형태 정보를 포함하고 있는 모자이크 형판을 사용하여 머리와 턱을 포함한 얼굴 영역을 추출하였으며, 눈 위치 추출 단계에서는 눈의 위치 정보를 사용하여 눈의 탐색 영역을 결정하고, 탐색 영역 내에서 이진 영상 형판을 사용하여 눈의 위치를 추출한 후, 눈 영역의 무게 중심을 눈의 중심 위치로 설정하였다. 마지막 얼굴 영역 추출단계에서는 두 눈의 위치를 기준으로 사각형의 영역을 얼굴 영역으로 추출하였다. 제안된 방법의 성능을 검증하기 위하여 1700장의 다양한 영상에 대하여 실험하였으며, 실험 결과 한 장의 영상에서 얼굴 영역을 추출하는데 있어서, Pentium 166Mz의 PC상에서 평균 3.2초의 처리 속도와 91.7%의 추출률을 보임으로써, 실시간 얼굴 영역 추출에 매우 효과적임을 알 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2011

We have developed the process of forming one body S-type cantilever probe in the recessed trench for fine-pitched MEMS probe card. The probe (cantilever beam and pyramid tip) was formed using Deep RIE etching and wet etching. The pyramid tip was formed by the wet etching using KOH and TMAH. The process of forming the curved probe was also developed by the wet etching. Therefore, the fabricated probe is applicable for the probe card for DRAM, Flash memory and RF devices tests and probe tip for IC test socket.