• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.87-93
• /
• 2001

Pressure-balanced external Ag/AgCl electrode has been extensively used for both Pressurized Water Reactor (PWR) and Boiling Water Reactor (PWR) environments. The use of KCI-based buffer solution often becomes the source of electrode potential drift due to slow leakage through its porous plug, typically made of zirconia. It is reported that results of our effort to improve the stability of electrode potential by using high purity water as the filling solution in which $Cl^-$ ion activity can be established and maintained at the solubility of AgCl even with the sustained leakage for a long period. Stability tests have been made in boron and lithium mixture solution at $288^{\circ}C$. The electrode potential remained stable within 10 mV over one week period. And after a thermal cycle between 288 to $240^{\circ}C$ the potential shift of Ag/AgCl electrodes did not exceed 15 mV By using the limiting equivalent ionic conductances and Agar's hydrodynamic theory, the thermal liquid junction potential (TLJP) of the electrode has been predicted. The calculated values for the water-fiued Ag/AgCl electrode potential, in which the chlorine concentration in the filling solution was derived from the measured data at ambient temperature, had a good agreement with the experimental values.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.607-614
• /
• 2013

Nowadays, automotive manufacturers have developed various technologies to improve fuel economy and reduce harmful emissions. The ultra-lean direct injection engine is a promising technology because it has the advantage of improving thermal efficiency through the deliberate control of fuel and ignition. This study aims to investigate the development of a spray-guided-type lean-burn LPG direct injection engine through the redesign of the combustion system. This engine uses a central-injection-type cylinder head in which the injector is installed adjacent to the spark plug. Fuel consumption and combustion stability were estimated depending on the ignition timing and injection timing at various air-fuel ratios. The optimal injection timing and ignition timing were based on the best fuel consumption and combustion stability.

• Korean Journal of Organic Agriculture
• /
• v.14 no.1
• /
• pp.85-95
• /
• 2006

The investigation of the effect of the deep sea water in different concentration (0%, 10%, 20%, 30%, 40%) on the inhibition of growth, fresh weight, dry weight of the tomato, hot pepper, cucumber plug seedlings were conducted. As the concentration of the deep sea water was higher, the greater inhibition was noticed. The height were decreased at the rate of 8%, 25%, 32% in tomato, 9%, 26%, 27% in hot pepper, and 21%, 50%, 58% in cucumber plug seedlings as compare to local check. The fresh weights were decreased highly, as the concentration of the deep sea water increased. Tomato seedlings showed the decrease rate of 12%, 23%, 33% at above the ground part of plants, and 2%, 30%, 52% at under the ground parts. Likewise, Hot pepper seedlings showed the decrease rate of 1.1%, 5.7%, 15.4% at above the ground part of plants, and 22.1%, 25%, 47.1%, respectively at under the ground parts. The fresh weight of cucumber was decreased at the rate of 8.1%, 36%, 51% in the above the ground, and 6.2%, 11%, 65% at the under the ground parts. In tomato, hot pepper, and cucumber seedlings, the dry weight was decreased as the concentration of deep sea water was increased. Thirty percent of deep sea water treatment reduced the dry weight of the seedlings as half of the control seedlings. One of the important factors of the seedling quality is compactness. Compactness was highest at 20% deep sea water in all the three crop seedlings.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.878-885
• /
• 2016

A study was conducted to examine the effects of light quality on the growth and phytochemical contents of ice plant in a closed-type plant production system. Seeds were sown in a 128-cell plug tray using rockwool. The seedlings were then transplanted into a deep floating technique system with recirculating nutrient solution (EC $1.5dS{\cdot}m^{-1}$, pH 6.5) in a closed-type plant production system. The nutrient solution was supplied at two weeks after transplanting with 2.0 mM NaCl concentration in all treatments for the development of the bladder cells. The three light sources with different light qualities used were as followed; FL (fluorescent lamps), combined RW LED (red:white = 7:3), and combined RBW LED (red:blue:white = 8:1:1) at $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD with a photoperiod of 14/10 hours (light/dark). The results showed that the FL treatment had the greatest growth enhancement effects on the leaf area and the fresh and dry weights of the shoots and roots. The SPAD values were significantly higher under the FL and RBW LED treatments, at 29.8 and 30.6, respectively. No significant difference was observed in salinity under all treatments. Chlorophyll fluorescence was significantly higher under the FL treatment. The total phenol content and antioxidant activity were the highest under the RBW LED treatment. The total flavonoid content was significantly higher under the RBW LED and FL treatments. Hence, the results indicate that the growth of ice plant was maximized under the FL treatment. The phytochemical contents were maximized under the RBW LED treatment.

• Horticultural Science & Technology
• /
• v.18 no.4
• /
• pp.508-512
• /
• 2000

Growth of red pepper (Capsicum annuum) 'Kumtap', tomato (Lycoperisocon esculentum) 'Seokwang', petunia (Petunia hybrida) 'Madness Rose', and pansy (Viola tricolor) 'Magestic Giant' in mixtures of chestnut woodchips and granular rockwool at 25:75, 50:50, or 75:25 (v/v) was examined. Chestnut woodchips were soaked in water for 48 hours or aged in open field for 6 months in order to remove substances impeding plant growth. A commercial plug medium was used as the control. All treatments showed in a similar result in red pepper, petunia, and pansy. Plant height, fresh weight, dry weight, and chlorophyll content in media containing chestnut woodchips, especially in higher proportions, were poorer as compared to those in the control. On the contrary, height, fresh weight, and dry weight of tomato seedlings in media containing woodchips were significantly higher than those in the control. For petunia, pansy, and red pepper, six month ageing in open field of woodchips was more favorable for growth than 48 hour water soaking. Emergance of petunia seed was inferior, especially when woodchip content was higher, to the other crops with a resultant growth suppression. From the results, chestnut woodchips proved to be a practical material as a medium component only in tomato plants.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.2
• /
• pp.3-8
• /
• 2011

Recently, the demand for enterprise for service map providing and portal site services of a 3D virtual city model for public users has been expanding. Also, accuracy of the data, transfer rate and the update for the update for the lapse of time emerge are considered as more impertant factors, by providing 3D information with the web or mobile devices. With the latest technology, we have seen various 3D data through the web. With the VRML progressing actively, because it can provide a virtual display of the world and all aspects of interaction with web. It offers installation of simple plug-in without extra cost on the web. LiDAR system can obtain spatial data easily and accurately, as supprted by numerous researches and applications. However, in general, LiDAR data is obtained in the form of an irregular point cloud. So, in case of using data without converting, high processor is needed for presenting 2D forms from point data composed of 3D data and the data increase. This study expresses urban LiDAR data in 3D, 2D raster data that was applied by compressing algorithm that was used for solving the problems of large storage space and processing. For expressing 3D, algorithm that converts compressed LiDAR data into code Suited to VRML was made. Finally, urban area was expressed in 3D with expressing ground and feature separately.

• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.156-160
• /
• 2000

The Plasma film treated with a high electric voltage was developed to enhance flow down of condensation drops on inside plastic film. Arch type greenhouse framed with iron pipe of 25mm diameter defand 1.5mm thickness were covered with either the developed plasma film or surfactant film(control). Green pepper seedlings raised for 40 days in plug trays were transplanted at a density of 110cm by 30cm in each greenhouse. The mount of condensational water on film surface, generated by 7$0^{\circ}C$ water bath chimney systems and flew down, was collected and measured. The amount of collected water after 150 minutes was 2.56 mL.100c $m^{-2}$ and 0.94mL.100c $m^{-2}$ , respectively, in the plasma film and surfactant film-covered greenhouses. The amount of condensational water drops attached on the cover at 08:20 a.m. at 60 days filter covering was 0.34mL.100c $m^{02}$ and 0.32mL.100c $m^{-2}$ , respectively, in the plasma film- and surfactant film-covered greenhouses. Solar irradiance transmitted into greenhouse was 2.0% higher in the greenhouse covered with the plasma film tan that in the greenhouse covered with the surfactant film. Air temperature in the plasma film-covered greenhouse was higher than the surfactant film-covered greenhouse by 0.5$^{\circ}C$. However, there was no difference in relative humidity between the two greenhouse. Plant height, leaf area, dry weight and early yield showed no significant differences.s.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2017

A lot of piping systems have been used from nuclear power systems to water supply systems. The maintenance of the piping systems is needed to ensure proper operation of the piping systems. Failure of the large pipe systems especially such as KDHC(Korea District Heating Corporation) can be a matter directly related to the enterprise productivity and profitability. It can also lead to very important issues in promoting public safety and convenience. Therefore a method of quick and safety repairs have been emerged as the most important problem. In this study, freezing seal isolation method using liquid nitrogen cryogenic refrigerant was developed for the maintenance of a pre insulated heat transport pipe of KDHC with a diameter of 300 mm. In this study, by employing computational analysis techniques we performed the flow and heat transfer analysis for the targeted pre insulated heat transfer pipe and freezing seal jacket(ice-Plug) and have selected for optimal system. The detailed design model based on the results of the computational analysis finally was produced. A laboratory-scale test apparatus were designed and the freezing seal isolation self-test carried out. Also the performance assessment tests in the test bed of KDHC were carried out for on-site application.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.139-146
• /
• 2003

This study was conducted to investigate the effects on the over-growth inhibition of fruit vegetables (tomato, cucumber, and hot pepper) seedling by the treatment of triazole-typechemicals and to select the most effective chemicals for the over-growth inhibition, and to investigate suitabla concentration treatment and times of the newly selected chemical. The triazole-type chemicals inhibited stem height more, the more the concentration is increased in any crops. The diniconazole showed the highest dwarfing ration, and the tebuconazole and hexaconazole are also good for dwarfing ratio. The diniconazole decreased the plant height of cucumber, tomato, and hot pepper as the concentration is increased. In cucumber, thc dwarfing ratio was 30% in the 5 mg${\cdot}L^{-1}$ treatment, and was 60% in thc l00 mg${\cdot}L^{-1}$ treatment. In tomato and hot pepper, the dwarfing ratio was 30% in the 25 mg${\cdot}L^{-1}$ treatment in any times. In diniconazole treatment, the cucumber and tomato should have 5 mg${\cdot}L^{-1}$ at the lst growth stage and the hot pepper should have 5 mg${\cdot}L^{-1}$ at the 2nd growth stage to obtain good seedlings.