• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.6-14
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation. Also, We applied AMC on several channel environments using the parameters of IEEE 802.11n, and compared the Throughput performance when using each of the different SNR Estimation Algorithms. The results obtained in the simulation confirm that the proposed algorithm produces the highest Throughput performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.486-492
• /
• 2004

In this paper, we newly propose the binary CA-CDMA(constant amplitude CDMA) system using pre-coding method to solve the high PAPR problem caused by multi-user signal transmission in the CDMA system. 4-user CA-CDMA, the basis of proposed binary CA-CDMA system, makes binary output signal for 4 input users. It produces the output of binary(${\pm}$2) amplitude by using a parity signal resulting from the XOR operation of 4 users data. Another sub-channel or more bandwidth is not necessary because it is transmitted together with user data and can be easily recovered in the receiver. The extension of the number of users can be possible by the simple repetition of the basic binary 4-user CA-CDMA. For example, binary 16-user CA-CDMA is made easily by allocating the four 4-user CA-CDMA systems in parallel and leading the four outputs to the fifth 4-user CA-CDMA system as input, because the output signal of each 4-user CA-CDMA is also binary. By the same extension procedure, binary 64 and 256-user CA-CDMA systems can be made with the constant amplitude. As a result, the code rate of this proposed CA-CDMA system is just 1 and binary CA-CDMA does not change the transmission rate with the constant output signal(PAPR = 0 ㏈). Therefore, the power efficiency of the HPA can be maximized without the nonlinear distortion. From the simulation results, it is verified that the conventional CDMA system has multi-level output signal, but the proposed binary CA-CDMA system always produces binary output. And it is also found that the BER of conventional CDMA system is increased by nonlinear HPA, but the BER of proposed binary CA-CDMA system is not changed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.18-26
• /
• 2006

In this paper, we compare the performance of three representative STBC schemes, Alamouti's, Tarokh's and quasi-orthogonal schemes under cellular mobile environments when they are applied to the OFDM system. We first study the encoding algorithms of the STBC schemes along with the development of adequate demodulation algorithms. The OFDM parameters are selected by considering the Wibro system and adequate modulation schemes are assigned for each STBC schemes according to the transmission rate from 2bps/Hz to 4bps/Hz. The STBC-OFDM systems employ Walsh orthogonal codes covered along the frequency domain in order to estimate the channel information for different transmit antennas. We finally compare the performance of the STBC-OFDM systems according to the transmission rate through computer simulations in various mobile channel environments.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.150-160
• /
• 2000

The currently and most widely used client/server architecture is composed of database servers and clients that include both application and presentation logic. To date, due to the rapid growth in WWW, these client/server applications are implemented using Java language, especially in GUI design at client sides and client/server applications development using JDBC. To develop the applications using JDBC, developers should design database schema, code source code for JDBC connection, design report forms to display selected columns from server-side database. In this paper, we propose a development environment based on JavaBeans component for client/server applications development using JDBC. The proposed environment minimizes manual coding and enables developers to develop client/server applications easily with the designed JavaBeans components and their custom property editor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2209-2216
• /
• 2011

In this paper, we design a 32-bit eFuse OTP memory for PMICs using MagnaChip's $0.18{\mu}m$ process. We solve a problem of an electrical shortage between an eFuse link and the VSS of a p-substrate in programming by placing an n-well under the eFuse link. Also, we propose a WL driver circuit which activates the RWL (read word-line) or WWL (write word-line) of a dual-port eFuse OTP memory cell selectively when a decoded WERP (WL enable for read or program) signal is inputted to the eFuse OTP memory directly. Furthermore, we reduce the layout area of the control circuit by removing a delay chain in the BL precharging circuit. We'can obtain an yield of 100% at a program voltage of 5.5V on 94 manufactured sample dies when measured with memory tester equipment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.225-234
• /
• 2008

Orthogonal Frequency Division Multiplexing (OFDM) systems utilizing direct conversion receiver suffer from frequency selective (FS) and frequency independent (FI) phase and gain imbalances caused by imperfect local oscillator and low pass filter. In this paper, we analyze the impacts of the transmit/receive IQ imbalances on the system and propose the estimation and compensation schemes for those imbalances. The preamble signals coded by Alamouti scheme in the frequency domain could be used in the estimation of relatively large IQ imbalances with FS and FI characteristics and the estimation results are used for the compensation of distortions caused by the FI and FS IQ imbalances. The optimal maximum likelihood (ML) receiver or suboptimal ordered successive interference cancallation (OSIC) receiver utilizing the estimation results show symbol error rate (SER) performance improvement compared to zero-forcing (ZF) technique due to diversity gain inherent in the frequency domain IQ imbalances combined with the frequency selective channels.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.842-854
• /
• 2021

Performing industries in Korea and abroad have been attempting a wide range of artistic experiments utilizing online platforms ever since the Covid-19 pandemic. Accordingly, this study will shed light on the functional characteristics of Zoom, which was used as a creative tool for theater performances. At first, after examining theater performances presented in Korea and abroad using Zoom and their characteristics, the production stage of the Zoom play will be analyzed by dividing it into following stages; a research-based pre-production stage, a scene workshop stage that composes each scene based on the script, a recording stage filming each scene on Zoom, and Streaming stage for presenting the show. Furthermore, the actor's approaches to acting in this production process was presumed to be separation of gaze, re-recognition of space, utilization of expressive gestures, and reaction as an active action. As a result, it proposes the possibility of ongoing development of theatrical work using Zoom and the evolutionary aspect of actor's acting approaches in accordance with theatrical work via Zoom.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.20-35
• /
• 2016

In this paper, in order to reduce the delay and area of the partial product accumulation (PPA) of the parallel decimal multiplier, a tree architecture that composed by multi-operand decimal CSAs and improved CLA is proposed. The proposed tree using multi-operand CSAs reduces the partial product quickly. Since the input range of the recoder of CSA is limited, CSA can get the simplest logic. In addition, using the multi-operand decimal CSAs to add decimal numbers that have limited range in specific locations of the specific architecture can reduce the partial products efficiently. Also, final BCD result can be received faster by improving the logic of the decimal CLA. In order to evaluate the performance of the proposed partial product accumulation, synthesis is implemented by using Design Complier with 180 nm COMS technology library. Synthesis results show the delay of the proposed partial product accumulation is reduced by 15.6% and area is reduced by 16.2% comparing with which uses general method. Also, the total delay and area are still reduced despite the delay and area of the CLA are increased.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2000

This paper considers the consturction of 24/25 I-NRZI (Interleaved - Non Return to Zero Inverse) modulator designs for DVCR (Digital Video Cassette Recorder), and size of validity bit in order to store the amplitude value of square-wave and the standard data ( sine and cosine coefficients) at ROM Table that to acceptable the spectrum standard. The validity bit size of the standard data and the amplitude value of square-wave that to store at ROM Table are affected the size of pilot signal on the output spectrum, and the hardware size of modulator. At the designable 24/25 I-NRZI modulator, we simulated using random pattern (F0,F1,F2) that to verification the output data of the spectrum. Moreover, the resultant of the spectrum analysis, at the optimizing value, is 0.065 on the amplitude value of square-wave, and 3bit on the size of bit in order to store the standared data at ROM Table. In order to verify the hardware of designable 24/25 I-NRZI modulator, we perform to modeling of C-language firstly, and coding to Verilog HDL (Cadence Verilog XL) and synthesized using Synopsys (Library "Samsung KG75") tool as a base of spectrum results. In a foundation of this result, we are considered the size of hardware. In this paper, a considerable 24/25 I-NRZI modulator designable less than 10,000 gates as that is improved consturction as regards the path method of pre-coder etc, and able to application digital camcorders as now practical use.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.215-228
• /
• 2021

The purpose of this qualitative study was to identify cultural factors among older Americans that could influence them to accept new welfare technologies. This study also explored how social and cultural-based plans could increase the acceptability of welfare technologies for improving the quality of life of older adults in the future. In-depth interviews were conducted with ten professionals who work with older adults. The collected interview data were subsequently analyzed using a two-cycle open coding process. The data analysis generated 29 codes that were organized into 7 primary codes, or categories, and 22 secondary codes nested within the primary codes. Several themes were identified: individualism, family-oriented culture, pragmatism, low-context culture, privacy, fun-seeking culture, and a less hierarchical culture. These findings will inform the development of a future survey to examine the relationship between older adults' intentions when using technology and socio-cultural factors in community settings. In order to explore the different impact levels of the cultural factors found in this study, the future study will need to include measures for identifying socio-cultural variations among individuals in one country or across countries.