• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.157-162
• /
• 1997

Silicon Nitride samples with different microstructure were prepared by hot pressing and subsequent heat treatment under N2 gas pressure. The fracture toughness (KIC)of Si3N4 increased with the increase of grain size, but the bending strength of plain specimen($\sigma$F) decreased. The relation between fracture stress($\sigma$c) and equivalent crack length(ae) agreed well with the calculated values by process zone size failure criterion. A probabilistic failure assessment curve is proposed based on both statistical character of $\sigma$F and KIC.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.46-46
• /
• 2011

각종산업의 건축자재, 전기기기 등의 분야에서 내식성 향상용 표면처리 도금재로 가장 많이 사용되고 있는 아연과 실용금속 중 가장 가벼우면서 비강도 및 치수 안정성이 뛰어난 Mg을 사용하여 Zn-Mg의 합금 박막을 제작하였다. 여기서는 Zn, Mg 단일 박막의 밀착성과 내식성의 한계점을 극복하기 위해서 모재와 코팅층 사이에 Al을 삽입하여 (Zn-Mg)/Al 합금 박막을 형성시켰다. 또한 박막의 증착과정 중 이들 막의 제어는 바이아스 전압을 일정하게 하고 진공도를 변수로 하였고, 진공도에 따라 달라지는 쳄버내의 가스 입자가 흡착 인히비터로 작용해서 박막의 몰포로지와 결정배향성의 구조에 중요한 영향을 준다는 것을 확인하였다. 그리고 이들 박막의 내식성과 밀착성에 미치는 몰포로지나 결정배향성과의 상관관계를 규명하여 최적의 코팅 프로세스를 결정하므로써 중간층 유무별 Zn계 합금박막의 기초적인 제작설계 지침을 제공하였다.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.1
• /
• pp.159-181
• /
• 2004

본 연구에서는 신차개발 과정에서 공급업체의 조기참여 프로그램을 통한 자동차용 강판 제조업체의 기술혁신에 대해 고려하기로 한다. 먼저, 치열한 경쟁 하에 놓인 자동차용 강판 공급업체의 생존전략으로 자동차업체와의 기술적 파트너십의 중요성과 함께 시장을 둘러싼 대내외 경영환경을 분석하고자 한다. 자동차산업의 신차개발 프로세스 단계별 기술적 목표를 명확히 제시하고 차체의 수명사이클에 근거한 최적 소재를 선정하기 위한 조기참여 활동의 필요성을 강조하고자 한다. 또한 자동차용 강판 공급업체의 최적 기술전략 수립 및 방향을 설정하기 위해 자동차용 소재시장에서의 철강재 위상을 제고하고, 핵심 기술목표를 도출하고자 한다. 마지막으로 자동차용 강판 제조업체의 핵심 기술로 고성형성, 고강도강판 및 내식성이 우수한 도금강판에 대해 공급업체의 조기 참여를 통한 기술혁신 과정을 살펴보고자 한다.

• Annual Conference of KIPS
• /
• 2000.04a
• /
• pp.1001-1006
• /
• 2000

90년대 이후 새로운 소프트웨어 개발 방법론으로 객체 지향 방법론이 새로운 패러다임으로 등장한 후 최근에는 컴포넌트 기반 개발 방법 등이 소개되어 다양한 분산 컴포넌트 기술이 태동되었다. 분산 컴퓨팅 환경 하에서의 컴포넌트 기술은 정보 시스템 구축 시 구성요소의 모듈화를 용이하게 하고 인터페이스를 통한 컴포넌트 재사용 성을 가능하게 하여 소프트웨어 생산성 향상에 크게 기여하였다. 본 연구에서는 OMG에 의해 제안된 표준 분산모델로서 코바 프레임워크를 기반으로 정보구조 모델링 방법론을 이용하여 컴포넌트를 구성하고 컴포넌트의 추출을 돕기 위한 컴포넌트 저장소 명세서, 분산 어플리케이션 개발 프로세스 절차를 제안 하고자 한다.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.72-80
• /
• 2021

Based on the previous year's statistics, 37% of buildings in South Korea are aged over 30 years. As the number of the aging buildings increases, so does the need for maintenance. Building maintenance involves a significant number of works; the work of 'maintenance manager' accounting for the largest part. Currently, the maintenance history record is mostly in drawing or handwritten form which makes reviewing the data highly time consuming. Therefore, to improve the convenience of maintenance works and optimize historical data management, the existing maintenance process was analyzed. Problems were derived and a smart device-based automation model was established. In order to establish a smart device-based automation model, ① general flow of facility management process was analyzed and related articles were reviewed, ② current maintenance process was optimized, ③ functional block diagram of BIM Data, COBie Data, IoT, and AR-based automated maintenance management model was created, ④ a smart device-based automated maintenance management model was constructed, ⑤ finally, the above system was verified by testing the aforementioned model in the field site, evaluating the time required for the maintenance process and reviewing maintenance history data against the current one.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.10-19
• /
• 2014

In recent, hospital information systems are widely used to electronically record, manage and share the data collected in hospitals. Such systems have contributed greatly to improving the work efficiency in modern hospitals, however, the collected data concerning the patients should be appropriately processed and reused to provide the healthcare service providers with decision supports. Especially, this paper proposes the patient flow monitoring system for the operations management of the outpatient department for patients with chronic diseases, and discusses the related issues. The proposed system visualizes the standard process model extracted from the patient history data and various performance measures, and this enables the managers to evaluate and enhance the operations of the outpatient clinic. In this paper, the patient flow monitoring system is applied to the rheumatology clinic, and the prototype system optimized for I-pad is illustrated.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.89-99
• /
• 2005

The testing time and cost of developed software can be reduced by automation of the whole or part of testing process. Since the testing automation tools to be used currently have been developed without their interoperability, test case information such as test procedures, test data, and expectation of test results generated at the stage of test execution cannot be shared and reused in other testing automation tools, In order to reduce testing time and cost, in this thesis, we have proposed a software testing automation framework which makes it possible to share and reuse the test case information generated in testing process. To prove the availability and effectiveness of proposed testing automation framework, three testing automation tools that are available in current market were experimented by the test scenario. As a result of experiment, the testing time and cost could be reduced by sharing and reusing the test case information in software testing automation framework.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1680-1691
• /
• 2009

To improve the quality of healthcare and build up the health delivery system, electronic health record system is important for healthcare institutions providing health services. However, the systems currently operated in domestic healthcare institutions use independent software interface with distributed environment for data search and process. Therefore, it raises an additional expense to buy or develop each interface module when there is a link to new system and the problem of complexity. To solve these problems, this study implemented the service oriented architecture basis for home nursing service and carried out an assessment. The study defined the process modeling and business requirements based on the scenario of service and drew 17 suitable services based on five verification items for service design. To draw the final service, seven services were selected by service litmus test (SLT). The study found that, by the improvement of business process for healthcare service support department, SOA based information system has an effect of time reduction of patient processing time. In conclusion, to enable the hospital information system to cope with various demands of healthcare consumers, it is necessary to consider the application of SOA technology which has excellent interoperability, reusability and maintenance.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1594-1609
• /
• 2010

In the case that multiple services are in race condition for limited I/O resource, the services or processes with lower priority occasionally occupy most of limited I/O resource. And it decreases QoS and performance of important services and makes it difficult to efficiently use limited I/O resource. Although system administrator allocates I/O resource according to priority of process, he/she can't know or expect how much resource will be used by the specific process. Due to these reasons, it causes the problem that he/she can't guarantee the service QoS and performance stability. Therefore, in this paper, we propose service based disk I/O control supporting predictable I/O bandwidth to resolve upper problems. Proposed I/O control guarantees the service QoS and performance stability by supporting the service based predictable I/O bandwidth and it makes limited I/O resource to be efficiently used in respect of service.

• Journal of KIISE:Software and Applications
• /
• v.35 no.2
• /
• pp.91-104
• /
• 2008

Service-Oriented Computing (SOC) is the development method that published services are selected and composed at runtime to deliver the expected functionality to service clients. SOC should get maximum benefits not only supporting business agility but also reducing the development time. Services are selected and composed at runtime to improve the benefits. However, current programming language, SOC platforms, business process modeling language, and tools support either manual selection or static binding of published services. There is a limitation on reconfiguring and redeploying the business process to deliver the expected services to each client. Therefore, dynamic selection is needed for composing appropriate services to service clients in a quick and flexible manner. In this paper, we propose Dynamic Selection Handler (DSH) on ESB. we present a design method of Dynamic Selection Handler which consists of four components; Invocation Listener, Service Selector, Service Binder and Interface Transformer. We apply appropriate design patterns for each component to maximize reusability of components. Finally, we describe a case study that shows the feasibility of DSH on ESB.