• Journal of Internet Computing and Services
• /
• v.14 no.2
• /
• pp.25-34
• /
• 2013

In this paper, we propose an activity-performer bipartite matrix generation algorithm for analyzing workflow-supported human-resource affiliations in a workflow model. The workflow-supported human-resource means that all performers of the organization managed by a workflow management system have to be affiliated with a certain set of activities in enacting the corresponding workflow model. We define an activity-performer affiliation network model that is a special type of social networks representing affiliation relationships between a group of performers and a group of activities in workflow models. The algorithm proposed in this paper generates a bipartite matrix from the activity-performer affiliation network model(APANM). Eventually, the generated activity-performer bipartite matrix can be used to analyze social network properties such as, centrality, density, and correlation, and to enable the organization to obtain the workflow-supported human-resource affiliations knowledge.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.455-458
• /
• 2013

The conventional design of the information system architecture based on the personal experience of information systems has been acted as a limit in progress utilizing appropriate resource allocation and performance improvements. Architecture design depending on personal experience makes differences in variance of a designer's experience, intellectual level in related tasks and surroundings, and architecture quality according to individual's propensity. After all these problems cause a waste of expensive hardware resources. At working place, post-monitoring tools are diversely developed and are running to find the bottleneck and the process problems in the information operation. However, there are no simulation tools or models that are used for expecting and counteracting the problems at early period of designing architecture. To solve these problems we will first develop a simulation model for designing information system architecture in a pilot form, and will verify validity. If an error rate is found in the permissible range, then it can be said that the simulation reflects the characteristic of information system architecture. After the model is developed in a level that can be used in various ways, more accurate performance computation will be able to do, getting out of the old way relying on calculations, and prevent the existence of idle resources and expense waste that comes from the wrong design of architecture.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.14-23
• /
• 2010

A considerable number of construction disasters occurs on pathway. A safety management in construction sites is usually performed to prevent accidents in activity areas. This means that safety management level of hazards on pathway is relatively minified. Many researchers have introduced that a hazard identification is fundamental of safety management. Thus, algorithms for helping safety managers' hazardous area identification is developed using automated data collection technology. These algorithms primarily search potential hazardous area by comparing workers' location logs based on real-time locating system and optimal routes based on BIM. And potential hazardous areas is filtered by identified hazardous areas and activity areas. After that, safety managers are provided with information about potential hazardous areas and can establish proper safety countermeasures. This can help improving safety in construction sites.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.103-110
• /
• 2023

In this study, clustering analysis was performed to find out the influence of the maturity level of Industry 4.0 of SMEs in Korea, index factors of clustering, and major factors on the self-evaluation of companies. When 80 domestic SMEs were classified into 4 categories, it was found that there was a significant positive correlation between process, technology and organization. In addition, the majority of the 80 companies tested according to the maturity model appear to be immature or partially mature, and many improvements and re-evaluation of innovation strategies related to Industry 4.0 are needed. Finally, it was concluded that the Singapore Smart Industry Readiness Index is suitable for conducting self-assessment in domestic SMEs. These conclusions can serve as useful maturity and grouping guidelines for practitioners and researchers.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.685-696
• /
• 2022

This study explores convergence curriculum for design and data science, and applies data science knowledge on undergraduate design classes for designer's data literacy. First, related studies about data literacy education for non-data science major's, and data driven design project cases are explored, then design competency and data competency based on NCS are studied. Then this study developed 3 step design-data convergence curriculum model for designers' data literacy. The curriculum model is applied on case study classes, which are Big data and UX design(2) classes. The learning results and student's feedback of the case study classes are collected and analyzed to prove the design-data convergence curriculum, and the results provide findings and implications of the design-data convergence class case study.

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.509-524
• /
• 1998

정보시스템 개발노력의 상당수는 실패로 끝나고 있다. 최근 통계에 따르면 정보시스템 개발 프로젝트의 반은 실패로 끝난다고 한다［kaplan, 1998］. 이와 같은 높은 실패율은 시스템 개발을 위한 노력을 체계적으로 투입하지 못하고 개발 프로젝트를 관리하기 위한 노력을 단위프로젝트 차원에서만 집중시키는데서 연유한다고 생각된다. 다시 말해 장기적인 관점에서 개발조직의 역량 향상이라는 보다 근본적인 목표를 간과하고 있는 것이다. 이러한 점에 착안하여 소프트웨어 엔지니어링 분야에서는 정보시스템 개발과 관련'한 개발 조직의 능력을 향상시키기 위한 다양한 접근방법이 제시되고 있다. 개발조직의 개발 프로세스 성숙도를 진단하기 위한 측정도구로 개발된 카네기멜론대학의 CMM(Capability Maturity Model)과 ISO 에서 정의한 표준인 SPICE (Software Process Improvement and Capability dEtermination) 모델이 그 대표적인 예에 속한다. 그러나 이와 같은 모델들은 개발조직의 프로세스 개선을 위한 방향과 요건은 제시하고 있지만, 이를 조직 내에서 구현하기 위한 구체적인 방법이나 수단은 제시해주지 못하고 있다. 따라서 이러한 접근방법 역시 소프트웨어 엔지니어링 역량 이나 개발경험이 일천한 우리 현실에서는 부분적인 성과 이상을 기대하기는 어려웠다. 본 연구에서는 이와 같은 문제점이 개발 프로젝트와 관련된 경험이나 지식을 효과적으로 추출하고, 획득하고, 체계화하고, 시스템화하여 조직 내에서 활용하려는 노력이 부족한기 때문이라고 본다. 이에 본 연구에서는 개발조직의 역량 향상을 위한 지식관리적 접근 방법의 세가지 유형을 제시하기로 한다.>$Ca^{2＋}$ 는 뿌리에서, $Mg^{2＋}$ 는 잎에서 많았으며, $PO_4$$^{-}$ 는 과실과 줄기에서 많았다. 배지간에 따른 차이는 나타나지 않았으며, $K^{+}$, $Ca^{2＋}$ 및 $Mg^{2＋}$ 는10:0에서, $PO_4$$^{-}$ 는 8:2에서 각각 많았다.해 제품을 판매하였으며, 기업 및 제품이미지 제고를 위한 고객에 대한 서비스도 강화하고 있었다. 통신기기업체내지 소프트웨어 산업으로의 진출이 가능할 수 있도록 상호진출을 허용할 필요가 있다고 본다. 이를 위해서 우리 나라 정부 역시 미국처럼 새로운 통신개혁법을 만들 필요가 있다. 새로운 통신개혁법의 핵심적인 사항으로서 첫째, 통신과 CATV간의 상호진입을 허용, 둘째, 통신사업자가 통신관련 기기산업에 참여할 수 있는 규제완화를 허용, 셋째, 유아단계에 있는 소프트웨어 및 컨테트산업을 육성하는데 산업육성책 수립 등을 적극적으로 추진하여야 할 것이다. 그리고 현재 국내 재벌기업들로 구성되어 있는 기반산업을 지원하는 기술개발 지원체제와 육성정책을 소프트웨어 및 컨텐트의 응용산업으로 개편할 필요성도 제시되며, 이를 위해 범부처 차원에서 소프트웨어 및 컨텐트 육성정책을 지원하는 종합적인 대책을 마련해야 한다고 본다.서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막이 형성되기 때문으로 생각되고 있다. 또

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.657-662
• /
• 2006

공공사업의 목적은 사업을 통해서 발생하는 혜택을 인간 및 사회가치 적합하도록 최대한 확산하고자 하는 것이다. 그럼에도 불구하고 당해 사회적 가치를 고려하지 않는 경제 및 정책 범주에서만의 분석은 공공사업의 추진타당성에 신뢰저하를 가져오거나 사업추진지역사회의 막연한 불안감(저항)에 효과적으로 대응하지 못하는 문제를 일으키고 있다. 따라서 타당성 있는 사업추진 및 지역사회 저항을 극복할 수 있는 방법발견은 중요하다고 하겠다. 해결방향은 공공사업으로 영향 받는 당해지역에서의 경제(정책포함)외적인 제약조건까지 파악하여서 전반적인 사회경제적가치(시장가치)를 재발견해 가는데 있다. 그것은 공공사업의 예비타당성 평가시에 잠재적으로 부딪힐 저항이나, 개발이후에 발생할 수 있는 확산가치까지도 대상에 포함시켜야 한다는 의미이다. 주지하는 바와 같이 잠재적 가치는 경제적 요소에서만 발생하기 보다는 당해지역의 사회문화적 잠재성 극대화에서 나온다. 지금까지의 계획수립과정은 정부와 전문가집단이 중심이 되어 계획을 수립하고 작성된 계획안에 대해 시민단체, 환경단체 등 이해당사자들이 공청회나 공람을 통해 의견을 제시하는 소극적 프로세스였다. 한편, 대안적 프로세스는 계획수립의 초기단계부터 다양한 이해당사자를 참여시키고 이들을 보조자가 아닌 계획수립의 주체로서 인정하고 협의와 조정과정을 거쳐 합의를 도출함으로써 계획의 정당성을 확보하고 실행가능성을 높이는 방식이 유용할 것으로 사료된다. 본 연구는 미래지향적 가치를 포괄하고 있는 예비적인 사회적 타당성의 평가항목 및 방법을 제시하고자 한다. 이것은 일반적으로 사회영향평가(SIA: Social Impact Assesment)모델을 통해서 공공사업 및 민간사업이 당해 사회에 미치는 영향을 파악하고, 이의 대응방안 마련에 초점을 맞추고 있다. 주요 내용은 공공사업관리방식의 체계를 파악하고 공공사업의 사회적 타당성 및 국내외 적용사례 분석을 통한 시사점 도출과 사회성 검토항목 및 평가방법을 제시한 후, 우리나라에의 적용방안을 검토하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.557-562
• /
• 2008

In Korean construction industry, a public sector's ordering volume has been constantly increased after 2000. But, because a cost, schedule and quality control generally depends on a result-centric management form and a transparent management is not done during the construction in the Korean public business, it is recognized that this causes problems including an increase of cost and schedule, incomplete construction, a difficulty to find the problem in advance to establish measures, and an unclear locus of responsibility of constructor, supervisor and designer. Accordingly, this study is intended to derive the problems and the limit of management by identifying and analyzing the management state of the present government construction client for the client organization of public sector's government construction. Also, the study is intended to contribute to the client's efficient and actual project management by presenting the model of supplementing or improving the derived problem and limits to the client's organization.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.29-40
• /
• 2022

This study uses the bidet 4D double diamond design process model to propose an improvement for "senior-oriented bidet product service design" that reflects the characteristics and needs of seniors. This study was based on the product service system concept. To this end, qualitative research on seniors was conducted to derive user value factors, and, based on this, product service ideas were discovered, and a prototype reflecting the usefulness review of a working-level expert group was proposed. First, a "smart application service for user-customized function setting guide" was proposed. A bidet incorporating Internet of Things technology and a smart phone are linked to provide an app service that automatically interprets user characteristic information and information on bidet products to guide customized functions. Second, a control panel and remote control user interface to "user-oriented product service interface" was proposed. In consideration of the usability and cognitive ability of seniors, a simple and intuitive physical user interface such as a configuration centered on main functions, button arrangement according to task sequence, and a touch screen remote control was presented. Third, we proposed a "bidet care service linked with products and health/hygiene care" that provides a wide range of services such as user health and hygiene, cleanliness, entertainment, etc., in addition to regular bidet product service. This study proposed a product-based service design methodology that can improve user experience and relationship quality by discovering and improving the pain points and needs of users (seniors) in the process of using bidet products (before, during, and after use).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.649-658
• /
• 2006

Recently, Software Development was applied to new-approach methods as a various form : client-server system and web-programing, object-orient concept, distributed development with a network environments. On the other hand, it be concerned about the distributed development technology and increasing of object-oriented methodology. These technology is spread out the software quality and improve of software production, reduction of the software develop working. Futures, we considered about the distributed software development technique with a many workstation. In this paper, we discussed optimal release problem based on a stochastic differential equation model for the distributed Software development environments. In the past, the software reliability applied to quality a rough guess with a software development process and approach by the estimation of reliability for a test progress. But, in this paper, we decided to optimal release times two method: first, SRGM with an error counting model in fault detection phase by NHPP. Second, fault detection is change of continuous random variable by SDE(stochastic differential equation). Here, we decide to optimal release time as a minimum cost form the detected failure data and debugging fault data during the system test phase and operational phase. Especially, we discussed to limitation of reliability considering of total software cost probability distribution.