• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.517-521
• /
• 2006

네트워크 가상현실 시스템은 먼 거리에 떨어진 사용자들 사이에 일관성 있는 가상 세계를 제공하며, 군사, 오락, 건축 등 여러 부분에 응용되고 있다. 본 논문에서는 그 동안 고성능 그래픽 워크스테이션 환경에서 중심적으로 연구되어 왔던 네트워크 가상현실 시스템을 가장 보편적인 플랫폼인 네트워크 환경에서 구현할 때 생기는 3차원 그래픽 처리 성능의 문제 등과 같은 이에 대한 해결책들을 제시하고 미로 환경과 지형 환경에 근거한 가상 세계를 응용 실험 대상으로 삼아 성능을 분석하였다. 실시간으로 상호 작용하는 어플리케이션은 성능을 유지하면서 모든 참가자들에게 동일한 뷰를 보여주는 것이 중요하다. 동일한 뷰를 제공하기 위해 참가자들이 전송하는 이벤트마다 재생 지연 시간을 설정하고, 수신한 이벤트에 대해서는 예정 재생 시각까지 버퍼에 저장하여 모든 참가자들이 동시에 이벤트를 실행하도록 하는 기법이 제안되어 왔다. 그러나 네트워크 트래픽이 동적으로 변하므로 네트워크 상에서 발생하는 전송 지연 시간도 동적으로 변화한다. 그러므로 고정된 재생 지연 시간을 사용할 경우, 네트워크 트래픽 감소에 따라 상호 작용 성능을 향상시킬 수 있는 기회를 상실하게 되고, 네트워크 트래픽 증가에 따라 이벤트 손실률이 크게 증가하게 되어 참가자들 간에 일치하지 않는 뷰를 초래하게 된다. 네트워크 트래픽이 적어서 전송 지연 시간이 짧을 경우 짧은 재생 지연 시간을 적용하여 상호작용 성능을 높여주고, 트래픽이 많은 경우에는 재생 지연 시간을 늘림으로써 상호 작용 성능을 해치지 않는 범위에서 이벤트 손실률을 줄인다. 실험을 통하여 제안하는 기법의 성능을 평가하였으며 그 결과 본 동기화 기법이 고부하(heavily loaded) 네트워크 상태가 지속되는 동안 기존 기법에 비해 참가자들에게 일치된 뷰를 제공할 수 있고, 저부하(lightly loaded) 네트워크 상태에서는 상호 작용 성능을 향상시킬 수 있다는 것을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.9-17
• /
• 2000

In this paper we implement computer simulation system of 4FSK signal MODEM using Quadrature detector and analyze overall tranceiver system. We follow the FLEX wireless paging system standards and construct premodulation filter and data frame. We propose an efficient open loop symbol timing recovery algorithm which takes advantage of 128 bit length preamble pattern and also propose a 32 bit UW pattern which Is based on the optimal UW detection method, and excellent aperiodic autocorrelation characteristic. The BER simulation in the fading channel as well as AWGN is performed with BCH coding and Interleaving to the Quadrature detector system and it is shown that a high coding fain occurs in the fading channel rather than AWGN channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.91-96
• /
• 2019

There are so many low power MAC protocols for wireless sensor network. IEEE802.15.4 among them has disadvantage of a large power consumption for synchronization. To save power consumption it use the superframe operation alternating sleep mode and awake mode. But latency is longer result from superframe operation. Typical asynchronous B-MAC can have shorter latency according to check interval. But transmitter consumes more power because of long preamble. And receiver is suffering from overhearing. In this paper, we propose the adaptive check interval scheme of B-MAC for enhancing the power consumption and delay latency performance. Its power consumption is evaluated by comparing the proposed scheme with a typical IEEE802.15.4.

• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.53-62
• /
• 2013

It is common among users to have multiple computing devices as well as to access their files or do work at different locations. To achieve file consistency as well as mobility in this scenario, an efficient approach for workspace synchronization should be used. However, file synchronization alone cannot guarantee the mobility of work environment which allows activities to be resumed at any place and time. This paper proposes a ubiquitous synchronization approach which provides cloud-based access to a user's workspace. Efficient synchronization is achieved by combining session monitoring with file system management. Experimental results show that the proposed mechanism outperforms Cloud Master-replica Synchronization in terms of number of I/O operations, CPU utilization, as well as the average and maximum latencies in responding to client requests.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.97-101
• /
• 2014

We propose a timing-offset resilient OFDMA with achieving full diversity for uplink cooparative base station (BS) systems. In uplink OFDMA, timing offset (TO) among multiple users destroys subcarrier orthogonality and thus, it degrades the performance. In order to avoid this performance degradation, the accurate processing, so called 'ranging', is required to synchronize. However, in cooparative BS systems, it is difficult to perform ranging scheme. This is because if the ranging scheme is performed for a specific BS, timing offset has to occur for other BSs. Thus, the conventional ranging method cannot achieve full diversity gain in cooperative BS systems. By employing TO resilient OFDMA, so called, 'ZCZ time-spread OFDMA'. we achieve full diversity gain even with TO among multiple users. We show that the proposed scheme achieves the same performance with case of no multiple acces interference.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.74-80
• /
• 2008

Spatio-temporal filters are capable of reducing noise from moving pictures, which cannot be dealt with by spatial filters. However, the algorithm is too complicated to be realized as hardware. We implemented a real-time spatio-temporal noise reduction system, using at most three frames, based upon adaptive mean filter algorithm. Some factors which interfere with hardware implementation were modified. Noise estimated from the previous frame was used to filter the current frame so that filtering could be conducted in parallel with noise estimation. This speeds up the system thereby enabling real-time execution. The form of filtering windows was also modified to facilitate synchronization. The proposed structure was implemented on Virtex 4 XC4VLX60, occupying 66% of total slices with 80MHz of the maximum operation frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.211-220
• /
• 2018

The standard data link layer encryption provided by CCSDS has a structure that encodes HDLC frame into it using an AES algorithm. However, CCSDS is standard method has a structure in which the receiving side cannot request a re-activation when noise interference occurs over an unstable channel. SES Alarmed has a structure that enables the receiving side to additionally detect errors and perform re-activation requests in an operational structure similar to that of link encryption in CCSDS. The SES Alarmed related paper was intended to identify the optimum range of thresholds and identify data corruption due to channel noise. In this paper, the focus was on reducing the re-activation process if the HDLC frame, excluding the password Sync code, consistently exceeds any threshold levels. The HDLC frame order was changed and the results of using SES Alarmed were proposed and compared.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.329-342
• /
• 2017

Recently, interest and investment in the Internet of Things (IoT) have increased significantly, and security issues are constantly being raised. As a solution, the IETF ACE Working Group is establishing the ACE framework standard, which is a new security framework for various constrained IoT environments based on the existing OAuth 2.0. However, additional work is required to apply the ACE framework, which proposes a new lightweight security system, to the existing Internet environment, and this additional cost is a factor that hinders the application of OAuth 2.0 to the IOT environment. Therefore, we propose an IoT authentication framework based on OAuth 2.0's existing development motivation, and implement a proposal framework based on CoAPthon and analyze its performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.155-162
• /
• 2008

In this paper we proposed a video watermarking algorithm based on a three dimension discrete wavelet transform (3D DWT) and direct spread spectrum (DSS). In the proposed method, the information watermark is embedded into followed frames, after sync watermark is embedded into the first frame. Input frames are divided into sub frames which are located odd row and even row. The sub frames are arranged as 3D frames, and transformed into 3D wavelet domain. In this domain the watermark is embedded using DSS. Existing video watermarking using 3D DWT is non-blind method but, proposed algorithm uses blind method. The experimental results show that the proposed algorithm is robust against frame cropping, noise addition, compression, etc. acquiring BER of 10% or below and sustains level of 40dB or above on the average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.