• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.43-53
• /
• 2004

In this paper, we propose a robust deinterlacing algorithm which combines edge dependent interpolation (EDI) and global motion compensation (GMC). Generally, EDI algorithm shows a visually better performance than any other deinterlacing algorithm using one field. However, due to the restriction of information in one field, a high duality progressive image from Interlaced sources cannot be acquired by intrafield methods. On the contrary, since algorithms based on motion compensation make use of not only spatial information but also temporal information, they yield better results than those of using one field. However, performance of algorithms based on motion compensation depends on the performance of motion estimation. Hence, the proposed algorithm makes use of mixing process of EDI and GMC. In order to obtain the best result, an adaptive thresholding algorithm for detecting the failure of GMC is proposed. Experimental results indicate that the proposed algorithm outperforms the conventional approaches with respect to both objective and subjective criteria.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.397-404
• /
• 2013

This paper propose the hardware architecture of face detection hardware system using the AdaBoost algorithm. The proposed structure of face detection hardware system is possible to work in 30frame per second and in real time. And the AdaBoost algorithm is adopted to learn and generate the characteristics of the face data by Matlab, and finally detected the face using this data. This paper describes the face detection hardware structure composed of image scaler, integral image extraction, face comparing, memory interface, data grouper and detected result display. The proposed circuit is so designed to process one point in one cycle that the prosed design can process full HD($1920{\times}1080$) image at 70MHz, which is approximate $2316087{\times}30$ cycle. Furthermore, This paper use the reducing the word length by Overflow to reduce memory size. and the proposed structure for face detection has been designed using Verilog HDL and modified in Mentor Graphics Modelsim. The proposed structure has been work on 45MHz operating frequency and use 74,757 LUT in FPGA Xilinx Virtex-5 XC5LX330.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1347-1358
• /
• 2008

A blind video watermarking scheme for providing safety, authenticity, and copyright protection is proposed in this paper, which is robust to MPEG-4 SVC and multimedia transcoding. In proposed method, embedding and detecting of watermark is performed based on base layer with considering spatial SVC. To be robust from temporal SVC, our method embeds repeatedly a permutated character with ordering number per one frame. Also for robustness from multimedia transcoding and FGS, the method is embedded watermark in low middle frequency of each frame adaptively based on DCT in ROI. Through experimental results, invisibility of the watermark is confirmed and robustness of the watermark against the spatial SVC, temporal SVC, FGS and video transcoding between MPEG-2 and MPEG-4 SVC is also verified.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.46-54
• /
• 2006

In this paper, we propose a digital transceiver that can overcome the problems which current analog transceivers have. For the proposed transceiver, we assumed a frequency resource that consists of discrete and narrow channels. We also assumed that person-to-group, group-to-group, as well as person-to-person, voice and data communications with moderate security should be devisedand the data rate is 1 Mbps with simultaneous voice and data. Frequency hewing spread spectrum (FH-SS) and differential 8-PSK (D8PSK) were adopted for security reasons and bandwidth constraints, and for the reduction of implementation complexity, respectively. For the carrier and the symbol timing recovery, the structure of the preamble was proposed based on the IEEE 802.11 FHSS frame format to improve detection probability. The computer simulation results and power budget analysis implies that the proposed system can be usedin simple wireless communications in place of such as analog walkie-talkies.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.190-200
• /
• 2001

This paper is addressed to welding defect feature vector selection and implementation method of welding defect classifier using fuzzy techniques. We compare IAV, zero-crossing number as time domain analysis, power spectrum coefficient as frequency domain, histogram as both domain for welding defect feature selection. We choose histogram as feature vector by graph analysis and find out that maximum frequent occurrence number and section of corresponding signal scale in relative histogram show obvious difference between normal welding and voiding with penetration depth defect. We implement a fuzzy welding defect classifier using these feature vector, test it to verify its effectiveness for 695 welding data frame which consist of 4000 sampled data. As result of test, correct classification rate is 92.96%. Lab experimental results show a effectiveness of fuzzy welding defect classifier using relative histogram for practical Laser welding monitoring system in industry.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.74-79
• /
• 2008

In this paper, we propose and design a new 0.264/AVC watermarking algorithm for protection of copyright by inserting a watermark after quantization. This invisible watermarking algorithm insets a watermark into chrominance components of I frame such that we can avoid degradation of original images. According to test results we could limit image degradation by 1dB, avoid bit rate increment within 2% and increase processing time by only 2%. The IP is designed by Hynix 0.25 micron technology and the maximum operating frequency of 115MHz is achieved. The PSNR of the embedded watermark is about 35dB according to the test result.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.152-158
• /
• 2016

In this paper, we implemented the full stack platform design with MongoDB database of open source platform Raspberry PI 3 model. We experimented the triggering of event driven with acceleration sensor data logging with wireless communication. we captured the image of USB Camera(MS LifeCam cinema) with 28 frames per second under the Linux version of Raspbian Jessie and extended the functionality of wireless communication function with Bluetooth technology for the purpose of making Android Mobile devices interface. And therefore we implemented the functions of the full stack platform for recognizing the event triggering characteristics of detecting the acceleration sensor action and gathering the temperature and humidity sensor data under IoT environment. Especially we used MEAN Stack for developing the performance of full stack platform because the MEAN Stack is more akin to working with MongoDB than what we know of as a database. Afterwards, we would enhance the performance of full stack platform for IoT clouding functionalities and more feasible web design with MongoDB.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2011

In this paper, we propose a 3D conversion algorithm of 2D video using depth layer partition method. In the proposed algorithm, we first set frame groups using cut detection algorithm. Each divided frame groups will reduce the possibility of error propagation in the process of motion estimation. Depth image generation is the core technique in 2D/3D conversion algorithm. Therefore, we use two depth map generation algorithms. In the first, segmentation and motion information are used, and in the other, edge directional histogram is used. After applying depth layer partition algorithm which separates objects(foreground) and the background from the original image, the extracted two depth maps are properly merged. Through experiments, we verify that the proposed algorithm generates reliable depth map and good conversion results.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.559-571
• /
• 2013

This paper has presented a few problems when the 2D video superimposed the overlay text was converted to the 3D stereoscopic video. To resolve the problems, it proposes the scenario which the original video is divided into two parts, one is the video only with overlay text graphic region and the other is the video with holes, and then processed respectively. And this paper focuses on research only to detect and extract the overlay text graphic region, which is a first step among the processes in the proposed scenario. To decide whether the overlay text is included or not within a frame, it is used the corner density map based on the Harris corner detector. Following that, the overlay text region is extracted using the hybrid method of color and motion information of the overlay text region. The experiment shows the results of the overlay text region detection and extraction process in a few genre video sequence.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.286-292
• /
• 2003

Voice activity detection (VAD) is a process that separates the noise region from silence or noise region of input speech signal. Since unvoiced consonant signals have very similar characteristics to those of noise signals, it may result in serious distortion of unvoiced consonants, or in erroneous noise estimation to can out VAD without paying special attention on unvoiced consonants. In this paper, we propose a method to extract in an explicit way the boundaries between unvoiced consonant and noise in fluent speech so that more exact VAD could be performed. The proposed method is based on histogram in frequency domain which was successfully used by Hirsch for noise estimation, and a1so on similarity measure of frequency components between adjacent frames, To evaluate the performance of the proposed method, experiments on unvoiced consonant boundary extraction was performed on seven kinds of noisy speech signals of 10 ㏈ and 15 ㏈ SNR respectively.