• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.701-710
• /
• 2004

Uncertainty was quantified to evaluate calcium determination result in infant formula with AAS (Atomic Absorption Spectrometry) and ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). Uncertainty sources in measurand, such as sample weight, final volume of sample, sample dilution and the instrumental result were identified and used as parameters for combined standard uncertainty based on the GUM (Guide to the expression of uncertainty in measurement) and Draft EURACHEM/CITAC Guide. Uncertainty components of each sources in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, standard material molecular weight, standard solution concentration, standard solution dilution factor, sample dilution factor, calibration curve, recovery, instrumental precision, reproducibility, and stability, Each uncertainty components were evaluated by uncertainty types and included to calculate combined uncertainty. The kinds of uncertainty sources and components in the analytical method by AAS and ICP-AES were same except sample dilution factor for AAS. The analytical results and combined standard uncertainties of calcium content were estimated within the certification range $(367{\pm}20\;mg/100g)$ of CRM (Certified Reference Material) and were not significantly different between method by AAS followed by ashing and method by ICP-AES followed by acid digestion as $359.52{\pm}23.61\;mg/100g\;and\;354.75{\pm}16.16\;mg/100g$, respectively. Identifying uncertainty sources related with precision, repeatability, stability, and maintaining proper instrumental conditions as well as personal proficiency was needed to reduce analytical error.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2011

The objectives of this study were to investigate the physicochemical characteristics of soybean leaves in different cultivars and to develop a soybean curd prepared with soybean leave powder as a functional food. Four cultivars (Daewonkong leaf, Daepungkong leaf, Hwangguemkong leaf, and Seoritae leaf) were selected for this experiment. A significant difference was observed in the proximate composition of soybeans leaves (p<0.05). Soybean leaves had the highest content of carbohydrates. The mineral composition and isoflavone content in soybean leaves were significantly different among the cultivars (p<0.05). In particular, Daepongkong leaf had the highest content of genistein, daidzein, and total isoflavones. This study was also conducted to determine the quality characteristics of a soybean curd developed from daepongkong leaf with various concentrations (0, 0.1, 0.2, and 0.3%) of soybean leaf powder (SLP). The soybean curd yield rate increased according to the level of SLP added, whereas the L and a color values decreased. In the sensory evaluation, intensity scores for color, after taste, leafy taste, and chewiness were highest for the 0.3% soybean curd. The soybean curd with 0.2% SLP soybean milk attained the highest overall acceptability score. These results showed that soybean leaf was preferred over soybean curd containing 0.2% soybean leaf powder.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.41-51
• /
• 2012

We produced Hwanggiju (added 0.5~2.0% of ground Astragali Radix compared to starch contents) and investigated the physicochemical characteristics, DPPH free radical scavenging activities, polyphenol contents, and sensory evaluation. For all treatments, the initial pH was 3.9~4.1 and gradually decreased for 6 days from the 1st mashing day, and then rapidly increased to 4.67. As the fermentation proceeded, total acid contents increased in most of the treatments, reduced temporarily after the 2nd mashing time because of the addition of starch material and water, and then slightly rose again. There were little changes in pH and total acid contents followed by adding ground Astragali Radix (AR) to the fermentation periods. Amino acidities of all treatments showed patterns of which consistently rose as the fermentation proceeded and slightly reduced followed by increasing the addition rate of ground AR to the mashes. Soluble solid and alcohol contents also increased continuously and there were few differences among the treatments followed by adding to the ground AR rate. In color, there was no differences in L value, but a and b value showed significant differences by adding ground AR rate. In DPPH free radical scavenging activities, the control (no AR added) showed 53.6% and when grinded AR added, there were improving effects of the activities (0.52~6.9%). In polyphenol contents, the control was 1.05 mg/mL and the ground AR added treatments increased slightly. In the sensory evaluation, the control received a relatively high score ($5.0{\pm}1.0$), and the treatments which added 0.5% ground AR during the 2nd mashing time were also well received ($4.5{\pm}1.3$).

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2018

Supplemental lighting with artificial light sources is a practical method that enables normal growth and enhances the yield and quality of fruit vegetable in greenhouses. The objective of this study was to investigate the effect of sulfur plasma lamp (SP) and high-pressure sodium lamp (HPS) as supplemental lighting sources on the growth and yield of paprika. For investigating the effectiveness of SP and HPS lamps on paprika, the effects of primary lighting on plant growth were compared in growth chambers and those of supplemental lighting were also compared in greenhouses. In the growth chamber, plant height, leaf area, stem diameter, number of leaves, fresh weight, and dry weight were measured weekly at SP and HPS from 2 weeks after transplanting. In the greenhouse, no supplemental lighting (only sunlight) was considered as the control. The supplemental lights were turned on when outside radiation became below $100W{\cdot}m^{-2}$ from 07:00 to 21:00. From 3 weeks after supplemental lighting, the growth was measured weekly, while the number and weight of paprika fruits measured every two weeks. In the growth chamber, the growth of paprika at SP was better than at HPS due to the higher photosynthetic rate. In the greenhouse, the yield was higher under sunlight with either HPS or SP than sunlight only (control). No significant differences were observed in plant height, number of node, leaf length, and fresh and dry weights between SP and HPS. However, at harvest, the number of fruits rather than the weight of fruits were higher at SP due to the enhancement of fruiting numbers and photosynthesis. SP showed a light spectrum similar to sunlight, but higher PAR and photon flux sum of red and far-red wavelengths than HPS, which increased the photosynthesis and yield of paprika.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.129-153
• /
• 2017

Fair Competition policy in aviation field has been discussed since open skies policy began in 1970s. This issue has been also the main topic in the ICAO's Worldwide Air Transport Conference, the Air Transport Symposium, etc. ICAO defines competition as the existent or potential rivalry between two or more operators, carriers or groups, striving for advantages in the same market based on different prices, qualities and services. In a broader sense, the definition includes more various meanings; reasonable, fair, effective, and unrestricted competitions. Nowadays, competition laws and regulations to air transportation have been applied more frequently and the issues varies from antitrust immunity, mergers and alliances, abuse of dominant positions, capacity dumping and predatory pricing, sales and marketing, to airport charges and fees, state aid and loan guarantees. Now, the competition among the airlines or nations in aviation industry is changing to cooperation level. A lot of airlines try to survive by various cooperation methods. Therefore the policy of Korean aviation industry should be developed, taking so-called "the viewpoint of national aviation industry ecosystem" into consideration and Korean government should prepare a policy of fair competition to cope with it. First, in the process of open skies policy with neighboring countries such as China, Japan and the Middle East, it is necessary to apply the fair competition act and prepare laws and regulations to implement it. Second, the standards of effective ownership and control of air transportation business should be reviewed. Third, in preparation for aviation agreements and liberalization, the Korean aviation industry needs to study and review competition and cooperation issues through the analysis of strict aviation market structure for airlines and airport operations. Fourth, it is necessary to create a fair air transportation environment for the development of air transportation and competitiveness through preemptive policies such as the approval of mergers, acquisitions, JV and the ripple effects analysis.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2008

This study attempted to provide reference materials for improving the behavior level in radiation safety managements by drawing a prediction model that affects the radiation safety management behavior because the radiation safety management of medical Cyclotrons, which can be used to produce radioisotopes, is an important factor that protects radiation caused diseases not only for radiological operators but average users. In addition, this study obtained follows results through the investigation applied from January 2 to January 30, 2008 for the radiation safety managers employed in 24 authorized organizations, which have already installed Cyclotrons, through applying a specific form of questionnaire in which the validity was guaranteed by reference study, site investigation, and focus discussion by related experts. The radiation safety management were configured as seven steps: Step 1 is a production preparation step, Step 2 is an RI production step, Step 3 is a synthesis step, Step 4 is a distribution step, Step 5 is a quality control step, Step 6 is a carriage container packing step, and Step 7 is a transportation step. it was recognized that the distribution step was the most exposed as 15 subjects (62.5%), the items of 'the sanction and permission related works' and 'the guarantee of installation facilities and production equipments' were the most difficult as 9 subjects (37.5%), and In the trouble steps in such exposure, the item of 'the synthesis and distribution' steps were 4 times, respectively (30.8%). In the score of the behavior level in radiation safety managements, the minimum and maximum scores were 2.42 and 4.00, respectively, and the average score was $3.46{\pm}0.47$ out of 4. Prosperity and well-being programs in the behavior and job in radiation safety managements (r=0.529) represented a significant correlation statistically. In the drawing of a prediction model based on the factors that affected the behavior in radiation safety managements, general characteristics, organization characteristics, and selfefficacy didn't show a significant path statistically in which the prosperity and well-being programs in job characteristics affected the behavior in radiation safety managements. Therefore, it is necessary to establish a strategy that improves the level of prosperity and well-being levels in job characteristics in order to increase the behavior in radiation safety managements. Thus, this study provides basic materials for the radiation safety management of Cyclotron through the full-scale investigation that is first applied in Korea.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.286-296
• /
• 2010

The purpose of this study is to develop fresh pasta added with mulberry leaf powder as functional fresh pasta. Through previous research, the mixture of 40% of flour and 60% of rice powder was optimum for making noodles with mulberry leaf powder. Making fresh pasta with 40% of wheat flour, 60% of rice powder (optimum moo for making noodles) and mulberry leaf powder(0.5% 1.0% 1.5% 2.0%) was done, followed by the mechanical test(moisture content, color value, texture, tension) and the sensory analysis(quantitative descriptive analysis, preference test). Moisture contents of raw pasta and cooked pasta were the highest in control; scores for moisture contents of cooked pasta were higher than those of raw pasta. The result indicated that the more mulberry leaf powder was, the lower L-value and a-value were in raw pasta and cooked pasta. While the b-vale(yellowness) of raw pasta was the highest in control(9.81), 1.0% of mulberry powder addition sample was the highest in cooked pasta. For hardness, the 2.0% of mulberry leaf powder addition sample has high scores, and adhesiveness and chewiness were no significant difference. The 0.5% of mulberry leaf powder addition sample was the longest in tension distance, which was resulted from the lack of water contents in mulberry leaf powder. In cooked pasta, tension distance had no significant difference between the samples, and force showed the highest score in control. The quantitative descriptive analysis showed that color intensity, savory taste, bitterness were the highest in the 2.0% of mulberry leaf powder addition sample. Gloss and chewiness were no significant difference between the samples. Grassy flavor, savory flavor, bitterness and grainess were intense as mulberry leaf powder was added The preference test showed that MRP 1.5 containing 1.5% of mulberry leaf powder was the most preferable for color, texture and overall quality. In conclusion, 40% of wheat flour, 60% of rice powder and 1.5% of mulberry leaf powder made the best formula of fresh pasta with mulberry leaves.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1412-1418
• /
• 2013

The nutritional components of 14 new cultivars of pak choi (Brassica rapa L. ssp. chinensis) from China were analyzed and compared with 4 cultivars of Chinese cabbage (Brassica rapa L. ssp. pekinensis) popular in Korea. Leaves were separated into green parts (GP) and white parts (WP) for the analyses. The moisture and ash content in the 14 new cultivars of pak choi were not significantly different from the currently popular cultivars of Chinese cabbage. In addition, the levels of vitamin C and E were very similar between the two kinds of Brassica rapa. In contrast, the overall mineral content was higher in the new pak choi cultivars. Specifically, minerals important for human health, calcium and magnesium, were significantly greater in pak choi cultivars (calcium GP 2.57, WP 2.04; magnesium GP 0.422, WP 0.301 mg/g fresh weight) compared to currently popular cultivars (calcium GP 0.805, WP 0.477; magnesium GP 0.244, WP 0.101 mg/g fresh weight). Although the content of reducing sugars was similar, cellulose content (which correlates with the hardness of plant tissue) was four times higher in the new pak choi cultivars compared to currently popular cultivars. These results demonstrate that the new pak choi cultivars have superb nutritional benefits for human health and could be a good food source as a daily staple vegetable.