• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.90-93
• /
• 2006

전력기기가 고급화, 복잡화, 고기능성을 요구하면서 고신뢰도 설계를 위한 신뢰성 기술이나 고장없이 일정기간동안 사용하기 위한 품질관리활동의 중요성이 크게 대두되고 있다. 이러한 요구를 충족시키기 위해서는 시스템이나 이를 구성하고 있는 부품의 성능에 대한 신뢰도를 분석해서 설계 및 보수기술에 적용해야 한다. 본 연구에서는 신뢰도 평가를 기반으로하는 변전기기의 유지보수를 위하여 이에 필요한 점검주기, 수명산출, 고장모드와 영향평가 등과 같은 신뢰도 평가기술에 관하여 논하였다.

• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.65-71
• /
• 2017

"National important facilities" refers to facilities that have a great influence on national security and people's live s if enemy occupation, destruction, or functional paralysis is imposed by the Ministry of Defense Directive. In view of the case of nuclear plant hacking and the attack on the government building "National important facilities" could be the target of anti-social crimes. In the meantime, the "National important facilities" check is limited to the facilit y survey. so The purpose of this study is to develop generalized requirements. Therefore, comparing the requiremen ts of ISO 9001:2015 and ISO 27001:2013. There are only 8 differences(operating) out of 1-10. And the rest are used in common. In addition, we confirmed that the results of comparing the cases of domestic and foreign CPTED are within the "Six Principles". In Chapter 8, the principle of application of CPTED was inserted and the certification re quirements of the "National important facilities" management system were derived.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.305-311
• /
• 2016

If the automated image calibration system is performed in the position of non-experts, an expert will be required in every case inefficiently. But this requires an expert only when absolutely necessary. As well as the rapid system operation and efficient workforce can be managed. Image correction to perform projector inspection and management skills and to filter SW plug-in correction is that special theater system maintenance is not only managed efficiently, but also combined image analysis techniques can improve the technical perfection. This paper is to minimize the economic loss by developing a 10-bit High-depth and high-resolution $360^{\circ}$ projection image analysis technique and is to development of the special theater calibration system to effectively support quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.370-378
• /
• 2020

The Construction Operations Building Information Exchange (COBie) collects and documents a large amount of information from different paths in one place during design and construction projects. This documented information is readily available as a means of continuously transferring data to the facility management systems used by building engineers. In this process, the COBie Worksheet, an open standard form, is used to input the information by simplifying the list required by the user. As a result, COBie was developed to improve dramatically how relevant information is obtained and updated to support operations, maintenance, and asset management at the design and construction stages. On the other hand, to use COBie, a great deal of manual work is required for information linkage and quality inspection with heterogeneous data models. These issues become obstacles to COBie-based facility management system development. This study analyzed the COBie information system and defined the framework for simpler operating maintenance information from BIM (Building Information Modeling). Moreover, the rules for facility management information submission, quality inspection, role definition of framework components, and information linkage were derived. COBie DB schema and support data linkages could be generated effectively based on the proposed framework in prototype development.

• Journal of radiological science and technology
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2014

Breast shooting performance management and quality control of the generator is applied to the amount of current IEC(International Electrotechnical Commission) 60601-2-45 tube voltage and tube current are based on standards that were proposed in the analysis of the test results were as follows. Tube voltage according to the value of the standard deviation by year of manufacture from 2001 to 2010 as a 42-3.15 showed the most significant, according to the year of manufacture by tube amperage value of the standard deviation to 6.38 in the pre-2000 showed the most significant, manufactured after 2011 the standard deviation of the devices, the PAE(Percent Average Error) was relatively low. This latest generation device was manufactured in the breast of the tube voltage and tube diagnosed shooting the correct amount of current to maintain the performance that can be seen. The results of this study as the basis for radiography diagnosed breast caused by using the device's performance and maintain quality control, so the current Food and Drug Administration "about the safety of diagnostic radiation generator rule" specified in the test cycle during three years of self-inspection radiation on a radiation generating device ensure safety and performance of the device using a coherent X-ray(constancy) by two ultimately able to keep the radiation dose to the public to reduce the expected effect is expected.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.26-34
• /
• 2024

In this study, the food service management levels of cafeterias in childcare facilities were investigated based on the number of meal recipients and the working status of the kitchen staff. The study included 199 childcare facilities nationwide that received food supplies from the food ingredients distribution company, Pulmuone Foodmerce, from 2021 to 2022. The assessment was conducted using 61 inspection items. The analysis revealed that, as the number of meal recipients and kitchen staff members decreased, the documentation of inspection results was less likely to be conducted (P<0.05). Facilities with fewer meal recipients showed less adequate health status checks for kitchen staff, and those with fewer kitchen staff showed insufficient compliance with hygienic clothing (P<0.05). Additionally, facilities with fewer meal recipients showed a higher frequency of lapses in checking the expiration dates of stored ingredients (P<0.05), requiring increased management attention. They also exhibited the absence of internal temperature measurement records during heating processes (P<0.05). Furthermore, facilities with fewer meal recipients demonstrated inadequate maintenance of kitchen facilities (P<0.05). Significantly higher adenosine triphosphate (ATP) levels were detected on the hands and cutting boards of the kitchen staff in facilities with fewer meal recipients and fewer kitchen staff (P>0.05). Overall, facilities with fewer meal recipients exhibited insufficient infrastructure management for kitchen operations and inadequate hygiene management. These results are expected to provide foundational data for the selection of national support programs for childcare facilities in the future.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.6
• /
• pp.93-102
• /
• 2014

A mobile office environment using mobile devices, such as tablet PC, mobile phone is gradually increased in enterprises, banking and public institutions etc which is no limitation on places. It occurs advanced and persist security threats that are required effective security management policy and technical solution to be secure. For BYOD (Bring Your Own Device) environment, technical security management solutions of network control based, MDM (Mobile Device Management), MAM (Mobile Application Management), MCM (Mobile Contents Management) were released, evolved and mixed used. In perspective of integrated security management solution, mobile security product should be selected to consider user experience and environment and correct quality evaluation model of product is needed which is provided standards and guidance on the selection criteria when it was introduced. In this paper, the most widely used MDM solution is selected to take a look at its features and it was reviewed the product attributes with related international standard ISO/IEC25010 software quality attributes. And then it was derived evaluation elements and calculated the related metrics based on the quality analysis model. For the verification of quality evaluation model, security checks list and testing procedures were established; it applied metrics and analyzed the testing result through scenario based case study.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.179-184
• /
• 2005

This study was carried out to evaluate the quality of confectioneries among processed foods. Total samples were 3,716, and violative samples among them were 36. The snacks in confectioneries showed violative rate of $1.0\%$, and the traditional snack in snacks showed $8.4\%$. Violative items were acid value and peroxide value for the most part, so the fried snacks need to control the management hygienically. The nutrition ingredients were measured far carbohydrates, protein, fats, sodium and calories in bread. Indication values at packing were not suited to 18 of 20 breads on the indication criterion of ingredient. And nutrition ingredients were not indicated to breads of some company nevertheless be sure to indicated. The processed food should be managed thorough with regard indicated nutrition ingredient.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.102-113
• /
• 2013

The purpose of this study was to examine parental perceptions on the importance, performance level, and satisfaction with foodservice quality at daycare centers in the Compensation and Welfare Service institute. The questionnaire was developed to measure thirty-two attributes of foodservice operations are administered to 598 parents and 23 foodservice supervisors from June 22, 2009 to July 10, 2009. The parents placed a high importance on the need for foodservices, earning 4.70 points out of 5 points. Their perceptions of foodservice quality menu, foodservice ingredients and effects, facilities, sanitation, and service scored even higher than performance. The overall satisfaction level for foodservice compared to performance was 4.33 and 4.03 points out of 5 points, respectively. Multiple regression analysis indicated that 98.6% of the variance in parents' overall satisfaction scores was explained by six dimensions.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.35-44
• /
• 2013

Multi-trade Contract Method was introduced as a means of cutting down construction cost of public housing for low income people. Before a specific project delivery method is applied to large public construction project, it is necessary to discuss all the issues raised up from all the parties in construction industry and all the issues which can impact project performance. Thus the interviews were conducted with industrial professionals from diverse organizations and previous studies were investigated to figure out how this newly introduced project delivery method may impact owner's role and responsibility and project performance in terms of cost, schedule, quality and risk. Under the Multi-trade Contract Method, project owner's management tasks will be highly increased, so it should be checked out if the owner can do its role and responsibility. Public owner's organization also needs to be changed and proper project management procedure and system need to be established. In addition, for efficient application of Multi-trade Contract Method, public owner should consider diverse management approach to deliver the project, and how to select and maintain qualified specialty trades.