• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.357-362
• /
• 2010

This paper proposes the speech and noise recognition system by using a neural network in order to detect the speech and noise sections at each frame. The proposed neural network consists of a layered neural network training by back-propagation algorithm. First, a power spectrum obtained by fast Fourier transform and linear predictive coefficients are used as the input to the neural network for each frame, then the neural network is trained using these power spectrum and linear predictive coefficients. Therefore, the proposed neural network can train using clean speech and noise. The performance of the proposed recognition system was evaluated based on the recognition rate using various speeches and white, printer, road, and car noises. In this experiment, the recognition rates were 92% or more for such speech and noise when training data and evaluation data were the different.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2005

The basis function of wavelet transform used in this paper is constructed by using lifting scheme, which is different from general wavelet transform. Lifting scheme is a new biorthogonal wavelet con-structing method, that does not use Fourier transform for constructing its basis function. In this paper, an image compression and reconstruction method using the lifting scheme was proposed. And this method improves data visualization by supporting a partial reconstruction and a local reconstruction. Approx- imations at various resolutions allow extracting various sizes of feature from an image or signal with a small amount of original information. An approximation with small size of scaling coefficients gives a brief outline of features at fast. Image compression and edge detection techniques provide good frame- works for data management and visualization in multimedia database.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.889-896
• /
• 2004

The fractal advection-diffusion equation (ADE) is a generalization of the classical AdE in which the second-order derivative is replaced with a fractal order derivative. While the fractal ADE have been analyzed with a stochastic process In the Fourier and Laplace space so far, in this study a fractal ADE for describing solute transport in rivers is derived with a finite difference scheme in the real space. This derivation with a finite difference scheme gives the hint how the fractal derivative order and fractal diffusion coefficient can be estimated physically In contrast to the classical ADE, the fractal ADE is expected to be able to provide solutions that resemble the highly skewed and heavy-tailed time-concentration distribution curves of contaminant plumes observed in rivers.

• Journal of Aerospace System Engineering
• /
• v.12 no.5
• /
• pp.16-23
• /
• 2018

In the paper, a robot control technique by employing Biomimetics is described. Rhythmic movements of the diving beetle's leg were analyzed and the formulated equations on the motion were drawn by applying Fourier least mean square fitting method. Simple control parameters were defined by comparing the observed locomotion through a motion capture system and reproduced motions according to changes in the values in the equation. Subsequently, the correlation of each parameter was discovered and expressed in a parameter space. Apparently, it was confirmed that various bio-mimicking motions can simply be generated for controlling the robot. Additionally, robot designing based on adopting structural advantages which the living organism possess have been briefly introduced. The proposed bio-mimicking motion generating technique was observed to be applicable to robot system developments under various environmental conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.113-122
• /
• 2016

In this paper, we suggest a approach which comprises fast Fourier transform inversion by wavelet noise attenuation. It represents an inverse filtering by adopting a factor into the Wiener filtering, and the optimal factor is chosen to minimize the overall mean squared error. in order to apply the Wiener filter, we have to compute the power spectrum of original image from the corrupted figure. Since the Wiener filtering contains the inverse filtering process, it expands the noise when the blurring filter is not invertible. To remove the large noises, the best is to remove the noise using wavelet threshold. Wavelet noise attenuation steps are consisted of inverse filtering and noise reduction by Wavelet functions. experimental results have not outperformed the other methods over the overall restoration performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.230-237
• /
• 2012

The ultrasonic resonance method was applied to detect the disbond interface and empty layer between steel and FRP of the exit cone. The ultrasonic resonance method can easily detect the disbond interface and empty layer by amplifying the ultrasonic signal, but pulse echo method is difficult to distinguish adhesive interface from disbond interface or empty layer. The resonance frequency was predicted using the pressure reflection coefficient of 3-layered medium, and measured from ultrasonic signal of the test block using Fast Fourier Transform. The ultrasonic resonance proved that the predicted resonance frequency was in good agreement with the measured resonance frequency.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.457-466
• /
• 2010

In this paper, we propose a new method for detecting digital forgery that identify interpolated region between digital composited images. For detecting the interpolation factor and the tampered regions, we perform two algorithms: The first algorithm is to estimate the interpolation factors using the differential equation for forgery image along the horizontal, vertical, and diagonal directions, respectively; The second algorithm is to scan the interpolation factors along each direction for detection areas as the mask of the optical window size($64{\times}64$) in order to find out the forgery region. A detection map of the forgery is classified with the magnitude of estimated interpolation factors into colors. This detection map can be used to find out interpolated regions from the tampered image. Experimental results demonstrate the proposed algorithms are proven on several examples. We also show the proposed approach is to accurately detect interpolated regions from digital composite images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.376-376
• /
• 2023

전 세계적으로 중요한 담수 자원인 지하수의 미세플라스틱 오염에 대한 우려가 커지고 있다. 지하수 환경에서 미세플라스틱의 오염을 예측하고 평가하기 위해 대수층 내 현장 실태조사가 수행 중에 있으며, 실험실 규모의 컬럼 실험을 통해 지하수에서 미세플라스틱 이동 메커니즘을 조사하는 연구들이 수행되고 있다. 이러한 연구들은 많은 개수의 분석 시료를 동반하며, 환경 중 미세플라스틱 정량분석을 위해서 고가의 분석기기(라만분광기, 푸리에 변환 적외선(FTIR) 분광기, 열분해 가스크로마토그래피 질량분석기)를 사용하여 플라스틱의 종류를 판별하고 개수를 측정하고 있다. 또한, 컬럼 실험을 수행한 대부분의 선행 연구에서는 미세플라스틱 정량분석을 위해 탁도 분석, 분광광도계를 이용한 흡광도 분석, 현미경을 이용한 계수 방법 등을 이용하여 고가의 분석기기를 사용하지 않고 연구를 수행하였다. 하지만, 이러한 방법들은 유체 속 다른 물질이 포함되어있을 경우에 민감하고 농도를 비율 혹은 개수로 표현하기 때문에 질량 측면에서 미세플라스틱의 농도를 과소·과대 평가할 수 있다. 특히, 현미경을 이용한 계수 방법의 경우에는 분석에 많은 시간이 소요된다는 단점이 있다. 위에 언급한 다양한 분석법들의 단점들을 보완하기 위하여, 본 연구에서는 대수층 내 미세플라스틱 이동 특성을 규명하기 위한 실내 실험에 사용될 수 있는 형광이미지 기반의 미세플라스틱 정량분석법을 개발하였다. Nile Red 형광염료를 이용하여 미세플라스틱을 염색하고 사진을 촬영하여 미세플라스틱 시료의 질량과 미세플라스틱 형광이미지의 형광강도 간 상관관계를 분석하였다. 또한, Nile Red로 염색된 미세플라스틱 입자의 수중 노출 테스트를 진행하여, 실내 대수층 모의실험 시 미세플라스틱 질량을 정량화할 수 있는 적용 가능성을 평가하였다. 상관 분석 결과, 미세플라스틱 질량과 이미지의 형광강도는 높은 상관관계를 보였으며, 수중 노출 실험 전과 후의 미세플라스틱 입자의 형광강도 차이는 미미한 것으로 나타났다. 이러한 연구결과를 통해 본 연구에서 개발된 미세플라스틱 정량분석 방법이 포화 다공성 매체로 구성된 컬럼실험 시 유출수의 미세플라스틱 질량 추정에 유용하게 사용될 것으로 생각되며, 대수층 내 미세플라스틱의 이동 특성 규명 연구에 많은 도움이 될 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.303-303
• /
• 2023

실용적인 표면영상유속계를 만들기 위해서는 적절한 하드웨어와 소프트웨어로 시스템을 구성해야 한다. 이를 위해서 본 연구에서는 하드웨어로 CCTV를 선택하고, 초음파 수위계를 이용하여 수위를 지속적으로 읽어들이도록 구성하였다. 한편, 소프트웨어적으로는 11변수 투영법을 적용하여 변화하는 수위에 따라 정확한 측정점을 재구성하도록 하고, 아울러 각 측정점에서 주흐름방향으로 정확한 시공간영상을 작성하고, 이 시공간영상(spatio-temporal image)들을 분석하였다. 그결과, 5분 간격으로 촬영된 1분 길이의 영상을 지속적으로 촬영하고 분석하여 유량을 산정하는 표면영상유속계측 시스템을 구축하였다. 본고에서는 이러한 소프트웨어 개선방향중 하나인 주흐름방향의 시공간영상 작성법을 소개한다. 먼저, 11변수 투영법을 이용하여 하천의 표면영상에 대한 좌표변환계수를 산정하였다. 그리고 이 좌표변환계수를 이용하여, 하천의 수위변화에 따라 표면영상내의 측정점이 적절히 수정될 수 있도록 하였다. 그 다음 이 측정점에서 측정횡단면과 수직이 되는 방향을 선정하고, 이 방향이 영상내에서 하천 측정횡단면과 수직인 방향, 즉 주흐름방향이 되도록 하였다. 촬영된 1분간의 동영상의 각 측정점 위치에서 잘라낸 시공간체적(spatio-temporal image volume)에서 주흐름방향의 시공간영상을 잘라내고 이를 상호상관법이나 고속푸리에변환을 이용하여 분석하였다. 이 때 만들어진 시공간영상은 주흐름방향과 정확하게 일치하여, 기존의 표면영상유속계의 문제이던, 일부 측정점의 유속벡터가 주흐름방향과 일치하지 않던 문제를 해결할 수 있었다. 개발된 방법으로 표면영상유속계를 제작하여 인수천에 시험 설치하고 호우 사상에 대해 검토한 결과 정확하고 신속하며 연속적인 유량측정이 가능하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.5-20
• /
• 2010

One-dimensional equivalent linear site response analysis is widely used in practice due to its simplicity, requiring only few input parameters, and low computational cost. The main limitation of the procedure is that it is essentially a linear method, in which the time dependent change in the soil properties cannot be modeled and constant values of shear modulus and damping is used throughout the duration of the analysis. Various forms of modified equivalent linear analyses have been developed to enhance the accuracy of the equivalent linear method by incorporating the dependence of the shear strain with the loading frequency. The methods are identical in that it uses the shear strain Fourier spectrum as the backbone of the analysis, but differ in the method in which the strain Fourier spectrum is smoothed. This study used two domestically measured soil profiles to perform a series of nonlinear, equivalent linear, and modified equivalent linear site response analyses to verify the accuracy of two modified procedures. The results of the analyses indicate that the modified equivalent linear analysis can highly overestimate the amplification of the high frequency components of the ground motion. The degree of overestimation is dependent on the characteristics of the input ground motion. Use of a motion rich in high frequency contents can result in unrealistic response.