• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.157-160
• /
• 2000

본 논문은 HMM(Hidden Markov Model)을 이용하여 인식을 수행할 경우의 오류를 최소화 할 수 있는 후처리 과정으로 신경망을 결합시켜 HMM 단독으로 사용하였을 때 보다 높은 인식률을 얻을 수 있는 HMM과 신경망의 하이브리드시스템을 제안한다. HMM을 이용하여 학습한 후 학습에 참여하지 않은 데이터를 인식하였을 때 오인식 데이터를 정인식으로 인식하도록 HMM의 출력으로 얻은 각 출력확률을 후처리에 사용될 MLP(Multilayer Perceptrons)의 학습용으로 사용하여 MLP를 학습하여 HMM과 MLP을 결합한 하이브리드 모델을 만든다. 이와 같은 HMM과 신경망을 결합한 하이브리드 모델을 사용하여 단독 숫자음과 4연 숫자음 데이터에서 실험한 결과 HMM 단독으로 사용하였을 때 보다 각각 약 4.5%, 1.3%의 인식률 향상이 있었다. 기존의 하이브리드 시스템이 갖는 많은 학습시간이 소요되는 문제점과 실시간 음성인식시스템을 구현할 때의 학습데이터의 부족으로 인한 인식률 저하를 해결할 수 있는 방법임을 확인할 수 있었다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.277-283
• /
• 2000

The heat transfer characteristics for air jet vertically impinging on a flat plate which had a set of hybrid rod were investigated experimentally. The rod had a cross section made with a half of circular cross section and that of rectangular and was installed in front of the plate. The heating surface was given constant heat flux value of 1020 W/$m^2^{\circ]C$ and the problem parameters investigated were jet Reynolds number, nozzle-to-plate spacing and the rod size. The local and local average Nusselt number characteristics were found to be dependent on the rod size because the flow was disturbed by installing the rod. Higher convective heat transfer rate occurred in the whole plate as well as in the stagnation region.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.697-702
• /
• 1996

원전 배관계통에 LBB를 적용하면 배관파단으로 인한 동적영향(dynamic effect)을 고려하지 않아도 되므로 각종 구조물의 설계가 단순해지고, 배관파단에 대비해 설치하였던 각종 지지구조물들을 제거할 수 있으므로 설계비용 절감 등 경제적 이점을 얻을 수 있다. 본 논문의 목적은 차세대원전 안전주입 및 정지냉각계통 배관에 대해 설계초기단계에서 LBB적용 여부를 판단할 수 있는 배관평가선도를 개발하는 것이다. 이를 위해 먼저 배관재료의 응력-변형률곡선을 사용하여 감지가능한 균열길이를 산출하였으며, 3차원 유한요소해석과 배관재료의 파괴저항곡선을 이용한 균열안정성평가를 수행하여 배관평가선도를 개발하였다. 본 연구에서 개발한 배관평가선도를 배관설계초기단계에 사용하면 LBB적용여부로 인한 설계변경과정이 불필요하므로 전체공기를 단축할 수 있으며, 특정한 배관계통이 아닌 일반 배관계통에 적용할 수 있으므로 LBB해석회수를 상당히 줄일 수 있다.

• The monthly packaging world
• /
• s.328
• /
• pp.104-115
• /
• 2020

산업통상자원부가 주최하고 한국생산기술연구원 패키징기술센터가 주관하는 '제14회 대한민국 패키징대전' 결과가 지난달 초 발표되었다. 코로나19의 영향으로 시상식은 개최되지 못했지만, 7월 27일부터 30일까지 일산 킨텍스 전시장에서 개최된 '코리아팩2020' 특별관에서 수상작들이 소개되었다. 국내 최고 권위의 패키징 종합 행사인 '제14회 대한민국 패키징대전'은 관련 산업 종사자의 긍지를 높이고 기술혁신 분위기를 확산하기 위해 2007년부터 한국생산기술연구원이 매년 개최하고 있는 행사로, 올해에는 (주)컬리의 '보냉기능을 가지는 포장용 골판지박스'가 대상인 국무총리상을 수상했다. 또한 공로부문에서는 이현호 (사)한국패키징단체총연합회 회장/(주)서원수출포장 대표이사와 (주)흥아기연이 산업통상자원부장관 표창을 수여받았다. 다음에 '제14회 대한민국 패키징대전' 기업부문 수상작을 통해 최신 국내 패키징 경향에 대해 알아보도록 한다.

• The monthly packaging world
• /
• s.338
• /
• pp.82-99
• /
• 2021

산업통상자원부가 주최하고 한국생산기술연구원 패키징기술센터가 주관하는 '제15회 대한민국 패키징 대전' 수여식이 5월 25일 경기도 킨텍스 전시장에서 개최되었다. 국내 최고 권위의 패키징 종합 행사인 '제15회 대한민국 패키징 대전'은 관련 산업 종사자의 긍지를 높이고 기술혁신 분위기를 확산하기 위해 2007년부터 한국생산기술연구원이 매년 개최하고 있는 행사로, 올해에는 율촌화학(주)의 'ECOBY-OPP(재활용가능한 유니소재용 고차단성 OPP필름)'가 대상인 국무총리상을 수상했다. 또한 공로부문에서는 조기룡 (주)국민피엔텍 대표이사와 김길수 (주)경연전람 전무이사가 산업통상자원부장관 표창을 수여받았다. 다음에 '제15회 대한민국 패키징 대전'기업부문 수상작을 통해 최신 국내 패키징 경향에 대해 알아보도록 한다.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.20-31
• /
• 2014

This thesis aims to how Seo Ye-won(徐禮元) who was the main character of Yukjeollyeo(六節閭) which means tangible cultural properties can receive Jeongnyeo(旌閭) and when he received it clearly. Also this thesis concentrates on why the name of 'Yukjeollyeo' was used even if there are five Jeongnyeos in the Yukjeollyeo. Lastly, this thesis also focuses on the people related to YookJeol. Seo Ye-won passed away with his family in 1593 when he acted as a head of local administration. In that time, the Jinjuseong(晉州城) battle was originated from Korea-Japan war(1592). After his death, Hoengseong(橫城) family(門中) and Confucian scholar made petition for administration in 1811. As a result Seo Ye-won and his wife Lady Lee of the Jeonju-Lee clan(全州李氏) were celebrated as the Jeongnyeo and Jeongyeogak was built in 1817. And his son(Seo Gye-seong:徐繼聖), Seo Gye-seong's wife Lady Noh of the Pungcheon-Noh clan(豊川盧氏), Seo Ye-won's daughter who were not married also could receive Jeongnyeo as Hoengseong family and confucian scholar made additional petition for administration in 1832. For these reasons, Jeongnyeogak(旌閭閣) was called 'Ojeongnyeo(五旌閭)'. After that, Miryang(密陽) family wanted to move it because Seon Ye-won is not the eldest son in the Hoengseoung family. But it could not be enforced and they made a new Yeokak(閭閣) and called 'Yukjeollyeo'. From that time to 1945, the name of Jeongnyeo in the Hoengseong had been still used 'OjeongYeo' and the signboard of Yukjeollyeo was hanged in Jeongnyeo in Hoengseong after 1945. Although there are five people who can get prize of Jeongnyeo, the reason why the name of 'YookJeol' is to memorize the loyalty of Seo Gye-cheol(徐繼哲) who was Seo Ye-won's second son. Hoengseong family made a representation to the government in order to made Seo Gye-cheol receive Jeongnyeo but he could not be celebrated. For these reasons, the loalty of Seo Gye-cheol with five people who received Jeongnyeo has been celebrated as 'YukJeol'. Through this study we could find the record of Yukjeollyeo and historic point clearly.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.

• Journal of the Korea society of information convergence
• /
• v.5 no.2
• /
• pp.59-65
• /
• 2012

This study analyzed the websites of domestic college's Teaching and Learning Center of Quality. The title of "Teaching and Learning Center of Quality" was given to 9 colleges selected for 3 years since 2010 by Korean Council for College Education. The websites mostly consist of introduction, teaching support, learning support, e-learning support, service, media support, resources, community, and so on. This study also analyzes the similarities and differences of the websites by the degree of the webpage menu activation. This study suggests the direction of the websites functions which college's Teaching and Learning Center should have.

• Journal of the Korea society of information convergence
• /
• v.7 no.1
• /
• pp.17-24
• /
• 2014

This study analyzed on web services status of World Class College(WCC)'s Teaching and Learning Center. WCC refers to colleges equipped with educational environment which can accommodate the needs of industry and growth potential and vision. Web services of WCC's Teaching and Learning Center consist of center introduction, teaching support, learning support, service, and specialized menu. This study analyzed on menu and specialized web services from 9 colleges out of total 21 colleges. This study is to propose a way of Teaching and Learning Center's web services which college's Teaching and Learning Center aims at by analyzing on web services of World Class College's teaching and learning center.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.124-132
• /
• 1997

This paper describes an experimental and numerical study on growing ductile crack-tip behaviors. The hybrid experimental and numerical method by means of a computer image processign technique, was applied to the analysis of both base metal and weld metal CT specimens. In the weld metal specimen, the initial crack-tip was placed in front of fusion line, and the crack orientation was perpendicular to it. Finite element analysis of crack growth behaviors in both base and weld matal specimens made of A533B Class 1 steel were also performed to examine the effects of weldment on near crack-tip fields. a series of experimental studies on crack-tip behaviors have clearly shown the qualitative effects of material properties, especially a hardening exponent. The experimental and numerical results have also shown that weldment does not affect displacement and strain fields near a crack-tip while a stress field is influenced by the difference between yield stresses of both base and weld metals.