• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3071-3080
• /
• 2015

The increased demand on the transport of both passengers and goods through rail systems implies higher traffic intensity and congestion on the railways, resulting in greater likelihood of accidents and also degraded passenger services. To cope with the issues, development of an integrated communication network for rails has attracted great deal of attention lately. GSM-R is such an example developed in Europe, which seems to have restrictions in providing various communication services due to network speed limit. For the reason, an LTE-based approach is under study in Korea. After the network development, operation management of the network is necessary. Design of operation management systems has been studied little and thus is the objective of this paper. To do so, a conceptual design has been carried out based on model-based approach. Specifically, a context model has first been created using the use case diagram. Then, SysML models of operational scenarios were developed for the management system. The SysML models have alternatively been expressed as EFFBD models to simulate and verify them. Consequently, the result of the conceptual system design for the operation management of the integrated wireless network is expected to be used as a basis for the detailed design later.

• The Korean Journal of Applied Statistics
• /
• v.29 no.2
• /
• pp.331-344
• /
• 2016

Whole Crop Barley (WCB) is a representative self-sufficient winter annual forage crop, along with Italian Ryegrass (IRG), in Korea. In this study, we examined the path relationship between WCB yield and climate factors such as temperature, precipitation, and sunshine duration using a structural equation model. A Bayesian approach was considered to overcome the limitations of the small WCB sample size. As prior distribution of parameters in Bayesian method, standard normal distribution, the posterior result of structural equation model for WCB, and the posterior result of structural equation model for IRG (which is the most popular winter crop) were used. Also, Heywood case correction in prior distribution was considered to obtain the posterior distribution of parameters; in addition, the best prior to fit the characteristics of winter crops was identified. In our analysis, we found that the best prior was set by using the results of a structural equation model to IRG with Heywood case correction. This result can provide an alternative for research on forage crops that have hard to collect sample data.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.402-411
• /
• 2018

This study was conducted to develop ingrowth estimation equations on Pinus densiflora found in Gangwon Province and in the center of Korean Peninsula, based on the National Forest Inventory (NFI)'s permanent sampling plot data. For this study, identical sampling plots in $5^{th}$ and $6^{th}$ NFI data were collected in order to identify ingrowth amounts for the last 5 years. Following two-stage approaches in developing the ingrowth estimation equations, the logistic regression model was used in the first stage to estimate the ingrowth probability. In the second stage, regression analysis on sampling plots with ingrowth occurrence was used to estimate the ingrowth amount. A candidate model was finally selected as an optimal model after a verification based on three evaluation statistics which include mean difference (MD), standard deviation of difference (SDD) and standard error of difference (SED). In results, a logistic regression model based on the number of sampling plot which did not result in ingrowth (model VI), was selected for an ingrowth probability estimation equation and exponential function including the species composition (SC) variable was optimal for an ingrowth estimation equation (model VII). The ingrowth estimation equations developed in this study also evaluated the estimation ability in various forest stand conditions, and no particular issue in fitness or applicability was observed.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.231-238
• /
• 2019

This study evaluated the antioxidant activity of the extract and fractions of Alnus firma. Alnus firma had the highest total phenolic content ($452.80{\pm}7.01{\mu}g$ gallic acid equivalents/mg) in a methanol (MeOH) fraction and the highest total flavonoid content ($112.29{\pm}11.14{\mu}g$ rutin equivalents/mg) and antioxidant capacity ($936.23{\pm}0.07{\mu}g$ ${\alpha}$-tocopherol equivalents/mg) in an ethylacetate (EA) fraction. The antioxidant activities of various solvent extract fractions of Alnus firma were evaluated using various antioxidant assays, including ${\beta}$-carotene-linoleate assay, reducing power assay, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay, metal chelating activity assay, superoxide anion radical scavenging assay, and lipid peroxidation inhibition assay using the ferric thiocyanate method. These activities were compared with those of ascorbic acid, butylated hydroxyanisole (BHA), gallic acid (GA), butylated hydroxytoluene (BHT), and ${\alpha}$-tocopherol. First, at a $250{\mu}g/ml$ concentration, the EA and MeOH fractions of A. firma showed 92.43% and 89.20% DPPH radical scavenging activity, respectively. Second, $50{\mu}g/ml$ of the EA fraction exhibited 72.49% superoxide anion radical scavenging activity, a little greater than the same dose of GA (60.88%). Finally, 0.5 and 1 mg/ml of the EA fraction showed 73.45% and 73.29% inhibition of peroxidation in the ${\beta}$-carotene-linoleic acid system, respectively. The decreasing order of reducing power was EA fraction > n-butanol (BuOH) fraction > dichloromethane (DCM) fraction > n-hexane (HX) fraction. The results obtained in the present study indicated that Alnus firma can be used as an easily accessible potential source of natural antioxidants.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.2
• /
• pp.1-11
• /
• 2018

Recently ICT, new technologies such as IoT, Cloud, and Artificial Intelligence are changing the information society explosively. But personal information leakage incidents of consignee's company are increasing more and more because of the expansion of consignment business and the latest threats such as Ransomware and APT. Therefore, in order to strengthen the security of consignee's company, this study derived the checklists through the analysis of the status such as the feature of consignment and the security standard management system and precedent research. It also analyzed laws related to consignment. Finally we found out the relative importance of checklists after it was applied to proposed AHP(Analytic Hierarchy Process) Model. Relative importance was ranked as establishment of an internal administration plan, privacy cryptography, life cycle, access authority management and so on. The purpose of this study is to reduce the risk of leakage of customer information and improve the level of personal information protection management of the consignee by deriving the check items required in handling personal information of consignee and demonstrating the model. If the inspection activities are performed considering the relative importance of the checklist items, the effectiveness of the input time and cost will be enhanced.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.616-623
• /
• 1996

Eum Yang Kwak, the aerial part of Epimedium koreanum, is widely used as a folk medicine for stimulant in man, tonic, and hypotensive purpose. The plant contains icariin (a specific flavonoid), magnoflorine (an alkaloid) and tannin, but their contents are not known until now. In this paper, a quantitative analysis method for them was developed. Determination of icariin and magnoflorine was successfully achived by high performance liquid chromatography equipped with a UV detector in the ranges of $0.1{\sim}0.4\;mg$ and $0.002{\sim}0.1\;mg\;per\;ml$ sample, respectively. Extraction of the plant was carried out with water or 50% ethanol using different decocting temperatures and times. Icariin was well extracted either by water ($100^{\circ}C$, 3hr) or 50% ethanol ($85^{\circ}C$, 1hr), and its content in the plant was measured to be 0.94%. On the other hand, magnoflorine was fully extracted by 50% ethanol ($85^{\circ}C$, 1hr), and its content was determined to be 0.16%. Therefore, decoction of the medicinal plant with water at $100^{\circ}C$ for 3hr turned out to be recommendable for the best extraction.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.361-373
• /
• 1999

Objectives: Receive Operating Characteristic(ROC) curve with the area under the ROC curve(AUC) is one of the most popular indicator to evaluate the criterion validity of the measurement tool. This study was conducted to develop a standardized questionnaire to discriminate workers at high-risk of work-related musculoskeletal disorders using ROC analysis. Methods: The diagnostic results determined by rehabilitation medicine specialists in 370 persons(89 shipyard CAD workers, 113 telephone directory assistant operators, 79 women with occupation, and 89 housewives) were compared with participant's own replies to 'the questionnair on the worker's subjective physical symptoms'(Kwon, 1996). The AUC's from four models with different methods in item selection and weighting were compared with each other. These 4 models were applied to 225 persons, working in an assembly line of motor vehicle, for the purpose of AUC reliability test. Results: In a weighted model with 11 items, the AUC was 0.8155 in the primary study population, and 0.8026 in the secondary study population(p=0.3780). It was superior in the aspects of discriminability, reliability and convenience. A new questionnaire of musculoskeletal disorder could be constructed by this model. Conclusion: A more valid questionnaire with a small number of items and the quantitative weight scores useful for the relative comparisons are the main results of this study. While the absolute reference value applicable to the wide range of populations was not estimated, the basic intent of this study, developing a surveillance fool through quantitative validation of the measures, would serve for the systematic disease prevention activities.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.393-408
• /
• 2005

We developed and compared two automatic algorithms for moving object detections in the YSTAR-NEOPAT sky survey program. One method, called starlist comparison method, is to identify moving object candidates by comparing the photometry data tables from successive images. Another method, called image subtraction method, is to identify the candidates by subtracting one image from another which isolates sources moving against background stars. The efficiency and accuracy of these algorithms have been tested using actual survey data from the YSTAR-NEOPAT telescope system. For the detected candidates, we performed eyeball inspection of animated images to confirm validity of asteroid detections. Main conclusions include followings. First, the optical distortion in the YSTAR-NEOPAT wide-field images can be properly corrected by comparison with USNO-B1.0 catalog and the astrometric accuracy can be preserved at around 1.5 arcsec. Secondly, image subtraction provides more robust and accurate detection of moving objects. For two different thresholds of 2.0 and $4.0\sigma$, image subtraction method uncovered 34 and 12 candidates and most of them are confirmed to be real. Starlist comparison method detected many more candidates, 60 and 6 for each threshold level, but nearly half of them turned out to be false detections.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.45-62
• /
• 2008

The purpose of this study was to investigate middle school home economics(HE) teachers' perception and needs on self supervision related to HE subject matter, Using the methods of survey and interview, 177 samples were collected. For collected surveys, mean value, standard deviation, frequency, percentage analysis were performed by using an SPSS/Win (ver10.1) program. The results of this study were as follows. First, the middle school HE teachers recognized that self supervision related to HE subject matter was absolutely needed to expand the improvement of techniques for teaching instructions and the width of knowledge on the studies on textbook. Second, the middle school HE teachers recognized the necessary parts of self supervision related to HE subject matter as HE teaching-learning methods, the studies on textbook contents, and HE education philosophy in order. Third, the middle school HE teachers recognized that it would be helpful in improving their HE class and expertise in order of field survey, participation in various training programs, utilization of mass media, participation in societies for researches and meetings and information sharing with co-teachers among the types of self supervision. Fourth, the middle school HE teachers needed the reduction in miscellaneous duties, less pressure for time, restoration of teachers' desire, support of physical resources (improvement of various environments such as classrooms and special rooms), economic support and various support programs (expanding the opportunities to participate in training and society and establishment of a database for relevant materials, etc.) to facilitate self supervision. As such, the middle school HE teachers' overall recognition on HE-related self supervision became significantly higher. To enhance the HE-related expertise, however, it would be necessary to conduct concrete and active support for HE education, philosophical area and the studies on textbook contents as well as the teaching-learning methods for HE in which teachers' demand was high. In addition, the HE teachers wanted to have an easy and quick access to various HE-related data; therefore, it would be urgent to summarize scattered relevant data and support the HE teachers more systematically.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.