• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.289-301
• /
• 2018

IIoT, the IoT technology applied to the industrial field, is being used as a monitoring technology for increasing in production rate and safety of workers. However, monitoring through the construction of IIoT network using Ethernet and RS485 in production lines where dozens to hundreds of machine tools are manufacturing components, have difficulties of infrastructure cost and network flexibility and fluidity. Therefore, in this paper, using IEEE 802.15.4 standard WSN device to construct a Ad-Hoc WSN in the production line. In addition, the transmission period and order of the sensor nodes are set by applying the EtherCAT communication method in which the payload frames are shared by all the sensor nodes. From this, we have overcome the problem of reliability decline and real-time issue due to the packet collision of wireless network and confirmed that it is a wireless network routing method that can be used in the actual industrial field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1155-1160
• /
• 2011

High-strength nickel-based super alloys have been widely used in aircraft engines, vessel engines, and turbine blades because of their high strength and excellent fatigue and oxidation resistance. In this study, tests were carried out to determine the total strain range and temperature for high-strength nickel-based super alloys. Prepared specimens of IN738LC were exposed to temperatures of $871^{\circ}C$ and $982^{\circ}C$ for 1,000.10,000 h. These specimens were subjected to tests of mechanical properties and microstructure observations. The changes in mechanical properties were related to changes in ${\gamma}$ according to the thermal exposure time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.897-904
• /
• 2017

Optical equipment consists of various components, and a detector is mounted and operated on aircraft, tanks, and warships for target detection and classification. The structural stability and optical performance of aeronautical optical equipment operated at several kilometers of altitude are degraded owing to vibration generated in the aircraft. It is necessary to verify the structural stability and optical performance requirements of the equipment in vibration environment conditions during the design phase. In this study, vibration environment conditions were analyzed using a test standard and the measurements of the vibration generated in aircraft. The conditions were classified as endurance and operating vibration conditions for structural stability and optical performance verification, respectively. The structural stability was verified according to natural frequency analysis, response analysis for the endurance vibration condition, and static analysis. The optical performance was verified by applying the vibration response analysis results to the optical design/analysis program.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.217-221
• /
• 2012

In this paper, we have fabricated by means of the "Micro-Block Stacking (MBS)" method the 8 pin mini DIL integrated Triplexer, which can transmit CATV and voice/data at the same time in a single fiber. Our MBS technique is a novel scheme of compact optical module packaging which secures precision positioning of the components on the optical beam path by prefixed stacks of ceramic blocks. The subassembly in which a laser diode, two receiver photodiodes, two WDM filters, and four micro lenses are integrated is only $5.40mm{\times}2.15mm{\times}1.05mm$ in size. As the Triplexer is aligned to the single mode fiber, the transmitter power of -14.5 dBm and the receiver sensitivities of 0.83 A/W, 0.73 A/W for 1550 nm, 1490 nm, respectively are obtained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.311-320
• /
• 2014

Rotor blades are important devices that affect the power performance, efficiency of energy conversion, and loading and dynamic stability of wind turbines. Therefore, considering the characteristics of a wind turbine system is important for achieving optimal blade design. When a design is complete, a design evaluation should be performed to verify the structural integrity of the proposed blade in accordance with international standards or guidelines. This paper presents a detailed exposition of the evaluation items and acceptance criteria required for the design certification of wind turbine blades. It also presents design evaluation results for a 2-MW blade (KR40.1b). Analyses of ultimate strength, buckling stability, and tip displacement were performed using FEM, and Miner's rule was applied to evaluate the fatigue life of the blade. The structural integrity of the KR40.1b blade was found to satisfy the design standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.125-130
• /
• 2017

Automotive materials and plant modules need to be prepared for freezing parts to operate in extreme areas such as Eastern Europe, Russia, and Canada. However, the only thing that has been done for ultra-qualifying materials for extremely low operating materials is that only the effects at low temperatures are conducted at room temperature, and the effects at low temperatures are only identified at low speeds. Therefore, this study examined the low-temperature characteristics of materials by conducting comparative tests on the mechanical properties of the room at the temperature and temperature of TP304 and TP316 materials, which are the most common materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.97-101
• /
• 2017

X-ray diffractometers are used to characterize material properties, such as the phase, texture, lattice constant and residual stress, based on the diffracted beams obtained from specimens. Quantitative analyses using X-rays are typically conducted by measuring the peak positions of the diffracted beams. However, the long-term use of the diffractomer, like any other machine, results in errors associated with the mechanical parts, which can deteriorate the accuracy of the quantitative analyses. In this study, the process of correcting systematic errors in the $2{\theta}$ range of $30{\sim}90^{\circ}$ is discussed, for which strain-free Si powders from NIST were used as the standard specimens. For the evaluation of the impact of such error correction, we conducted a quantitative analysis of the true lattice constant for tungsten thin films.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.1
• /
• pp.345-371
• /
• 2017

Traditionally, the construction industry field is one of the typical fields using facet analysis method. Internationally the facet analysis method is applied to the classification scheme "Uniclass" or thesaurus "Construction Industry Thesaurus(CIT)". In the case of Korea, the facet analysis method is being used in classification scheme "Construction Industry Classification System" but it is difficult to find studies on facet analysis method in thesaurus or building case study. This study aims to establish facet types by introducing building of thesaurus for information retrieval in construction field using facet analysis method and to suggest building plan of thesaurus in construction field using facet analysis method. In this paper, We establish the 11 top facets(agent/patient, artifacts, abstract, material, parts/component, works, attribute, media, process, space, time) and the 13 subfacet as rudimental facets and suggest building plan according to thesaurus building procedure which is suggested by International Standard(ISO 25964-1). The result of this study is expected to apply to facet based thesaurus. And it is also expected to reuse in Taxonomy or Ontology etc. and to use in interoperability with the classification scheme of Construction filed.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.485-489
• /
• 2018

For the construction of smart factory that are part of the Fourth Industrial Revolution, data from the production environments and production machines should be collected, analyzed, and feedback should be given to predict when failures take place or parts should be replaced. For this purpose, a system that monitors the production environments and the status of the production machines are required. In this paper, the monitoring system for mobile devices and PC is implemented by collecting environmental data from production sites and sensor data of production machine using LoRa, a low-power wireless communication technology. On the mobile devices, production environments and vibration data can be displayed in real time. In PC monitoring program, sensor data can be displayed graphically to check standard deviation and data variation. The implemented system is used to collect data such as temperature, humidity, and atmospheric pressure of the production environment, and vibration data of production machines.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.111-120
• /
• 2005

Software development creates many product that class components, Class Diagram, form, object, and design pattern. So this Paper suggests Index/XML Sequence Relation information system for product abstraction and classification, the system of design product Sequence Relation abstraction which can store, reuse design patterns in the meta modeling database with pattern Relation information. This is Index/XML Sequence Relation system which can easily change various relation information of product for product abstraction and classification. This system designed to extract and classify design pattern efficiently and then functional indexing, sequence base indexing for standard pattern, code indexing to change pattern into code and grouping by Index-ID code, and its role information can apply by structural extraction and design pattern indexing process. and it has managed various products, class item, diagram, forms, components and design pattern.