• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.1
• /
• pp.21-29
• /
• 2015

Other countries(USA, Europe) have performed the fire resistance design of buildings by the alternative performance design methods, which are based on fire engineering theories. However, in Korea, the process on the alternative fire resistance performance design has only suggested without any applications for real steel structures. Therefore, In the case of steel structures stagnant research on refractory measures face difficulties in introducing fire resistance design. In this study, first of all, Intumescent paint was analyze the thermal properties(thermal conductivity, specific heat and density). In Sequence, using the section factor by H-standard section propose of section concrete filled steel tube and hollow. finally presents a reasonable thickness Intumescent paint takes time to target performance of the proposed cross-section steel tube.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.83-83
• /
• 2012

면섬유는 강우량, 일조량, 온습도, 영양분 등의 성장환경조건과 유전인자 및 추수방법에 따라서 섬유길이, 단면구조, 꼬임, 성숙도 등이 다양하게 변화한다. 면섬유에는 pectin, cotton wax, 지방질, 단백질계 물질, 자연색소 및 무기질 등의 불순물을 약 5% 함유하고 있다. 이러한 물순물을 제거하여 처리액의 침투성 향상을 돕고, 백도를 증진시키기 위해 전처리를 한다. 본 연구에서는 산지별로 생산되는 원면의 특성을 알아보기 위해 중국, 인도, 인도네시아, 파키스탄에서 원면을 각각 수입한 후 동일한 조건으로 편직하였다. 4개국 원면의 꼬임과 단면형태를 관찰하고, 불순물의 함량을 알아보았으며, 정련과 표백처리를 농도별로 진행하여 전처리조건이 염색성에 미치는 영향을 알아보았다. 정련 및 표백조건을 20% 씩 증가시켜가며 전처리를 하였고 농도별로 전처리된 시료를 Yellow 색상의 반응성 염료 0.005% (owf)로 염색한 후 자동컬러측색장치(CCM)를 사용하여 색차, Yellow Index(Y.I.), White Index(W.I.)를 비교분석하였다. 결과를 보면 인도산 원면이 다른 원면에 비해 Y.I.와 W.I.에서 다소 차이를 보였고, 염색현장과 조제업체에서 제시한 표준 전처리조건을 참고로 하였을 때, 표준 전처리조건 대비 0 ~ 40% 농도까지는 색상차이가 크게 나타나지만 60% 농도 이상에서는 색상차이가 크지 않았다. 이 결과로부터 산지별 원면의 전처리시 최소한의 조제투입량으로 최적의 전처리효과를 볼 수 있는 전처리공정조건을 설정할 수 있었고, 이로써 원가절감 및 오폐수감소 등의 효과를 기대할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.640-644
• /
• 2008

하상경사가 커서 동수역학적 부정류 계산모형을 안정적으로 적용하기 어렵고, 홍수파의 감쇄효과가 적은 중소하천에 적합한 준정상류 계산모형을 개발하였다. 수립된 모형은 매 시각 유량에 대하여 1차원 하천 부등류 지배방정식인 단면 평균된 1차원 에너지 방정식을 풀도록 구성되어 있으며, 수치해법으로는 Newton-Raphson 방법을 적용한 표준축차법을 사용하였다. Newton-Raphson 방법을 적용하기 위해서는 통수면적, 하폭, 윤변, 동수반경 및 수위에 대한 윤변의 변화율 등의 변수들이 필요하다. 이와 같은 변수들은 각 계산점에서 수위를 계산하기에 앞서 단면자료를 사용하여 0.1 m 간격으로 모든 수위에 대하여 그 값들을 미리 구한 후, 반복 계산 단계에서 사용되는 수위에 대하여 필요한 변수들을 앞서 계산된 변수들과 선형 보간하여 사용하도록 하였다. 하천 구간내에 보가 존재하는 경우에는 보가 위치한 상 하류 간의 지배방정식으로 에너지 방정식 대신에 월류 유량 관계식을 사용하였으며, 이때의 수치해법 역시 Newton-Raphson 방법을 사용하였다. 수립된 모형을 한탄강 하류 구간에 적용하여 HEC-RAS 모형과 모의 결과를 비교한 결과, 두 모형의 계산결과가 잘 일치하는 것으로 나타났다. 에너지 경사항의 근사 방법에 따른 민감도 분석을 실시하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.583-591
• /
• 2021

In this study, the applicability and reproducibility of LIBS in the analysis of chloride penetration in the mortar section were investigated. Standard analysis (IC, potentiometric titration) and LIBS analysis were simultaneously performed on the accelerated and immersed mortar by chloride concentration. Through LIBS analysis after making an eluate at the same depth for each concentration, the signal intensity of chloride ions was confirmed according to the depth and concentration at the wavelength of 837.59 nm, and a correlation between the LIBS signal intensity and the chloride concentration was confirmed. Although it is an aqueous solution-based LIBS analysis, the applicability and reproducibility of LIBS were confirmed not only for the incorporation of chloride but also for the amount of permeated chloride.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.33-41
• /
• 1994

For the establishment of large force standard and the accurate measurement of large force, 2MN hydraulic force standard machine which consists of loading frame, deadweight machine, two ram/cylinder systems and hydraulic control system was designed and fabricated. Measurement results of shapes for tow ram/cylinders reveal that the ratio of effective area is 200.094. The relative deviation of force stability for the machine is about .+-. 0.01% at 2MN and is less than .+-. 0.005% below 2MN. This machine may be widely used to calibrate the force measuring devices in industry and to test the force sensors.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.13-22
• /
• 2003

Several design methods from overseas are employed without considering different conditions such as material properties, climate, and traffic condition in this country. Therefore, there are limitations in application. Therefore, new pavement analysis system which is able to design a pavement efficiently and economically should be set up. In this study, 243 probable sections are classified depending on values of layer thickness and elastic modulus, and the effect of load types for the probable sections are analyzed. The section showing larger load distribution is chosen for analysis. As a result of sensitivity, a layer thickness has more influence on pavement than an elastic modulus does. The stress distribution of FWD test load is larger than that of circular load. This study compares outputs between nonlinear elastic model and linear elastic model. Based on the result, this study finds nonlinear elastic model considering stress condition in the ground is recommended for subbase.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.290-297
• /
• 2010

At present, the design live load of railway is divided into common railway and high speed railway separately in Korea. L22 which is based on American railway standards is used for common railway and HL25 which is based on Eurocode is used for high speed railway. Although, the design load is the starting point for design of railway, any research for developing design load does not exist at all. However, Europe and Japan develops the design load model consistently for advanced design. Recently, deterministic, probabilistic and cost performance approaches are investigated for developing new design load in Europe which is called LM2000. In the present paper, as a step for developing new design live load model for Korean railway, deterministic processes will be introduced. The safety margins are analyzed based on serviced real trains versus proposed new design load model and a necessity for new design live load will be presented quantitatively.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.8
• /
• pp.15-25
• /
• 2010

The thin-layered sand seam in clay affects the soil behavior. Although the standard cone penetrometer (A: $10cm^2$) have been used to evaluate the thin-layered soil, the smaller diameter cone penetrometer have been commonly recommended because of the high resolution. The purpose of this study is the development and application of the Cone Resistivity Penetrometer (CRP), which detects qc, fs, and electrical resistivity at cone tip for the evaluation of thin layered soils. Two sizes of the CRP are developed for the laboratory and field test. The projected areas of CRP for the laboratory and field tests are $0.78cm^2$ (d: 1.0 cm) and $1.76cm^2$ (d: 1.5 cm), repectively. The length of friction sleeve is designed in consideration of ratio of the projected area to the friction sleeve area. The application tests are carried out by using the artificially prepared thin-layered soils in the laboratory. In addition, the field tests are conducted at the depth of 6 to 15 m in Kwangyang. In the laboratory test, the measured electrical resistivity and cone tip resistance detect the soil layers. Moreover, in the field test the CRP investigates the three thin-layered soils. This study suggests that the CRP may be a useful tool for detecting thin-layered in soft soils.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.137-149
• /
• 2004

For 3D modelling artificial objects with computers, we have to draw frames and paint the facet images on each side. In this paper, a geographic modelling system building automatically 3D geographic spaces using GIS data and real images of buildings is proposed. First, the 3D model of terrain is constructed by using TIN and DEM algorithms. The images of buildings are acquired with a camera and its position is estimated using vertical lines of the image and the GIS data. The height of the building is computed with the image and the position of the camera, which used for making up the frames of buildings. The 3D model of the building is obtained by detecting the facet iamges of the building and texture mapping them on the 3D frame. The proposed geographical modeling system is applied to real area and shows its effectiveness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.529-533
• /
• 2012

본 연구에서는 실내실험을 통하여, 하안침식을 고려한 망상하천에서 저수로의 이동특성을 조사하며, 2중 퓨리에 해석에 의하여 사주의 거동특성을 분석하였다. 실내실험은 평균입경이 1.4 mm이고, 표준편차가 1.35인 균일사로 10 cm 의 두께로 전체가 균등하게 채워진, 길이가 12 m, 넓이 2 m 수로에서 수행하였다. 각 시간별 하도의 지형변화에 대하여 2 중 Fourier 해석에 의한 지배적인 성분, 즉 모드(mode)의 변화를 분석하였다. 여기서 1-1 mode는 교호사주(alternate bars)이고, 1-2 mode와 2-2 mode는 2차 횡방향 모드로서 중앙 사주(central bars)를 나타낸다. 1-3 mode와 2-3 mode는 한 단면에서 횡방향으로 3개의 사주가 형성된 것(triple row bars)를 나타낸다. 초기에는 1-1 mode인 교호사주가 지배적이지만, 시간이 증가함에 따라, 교호사주인 1-1 mode는 감소하고, 한 단면에서 3개의 사주가 형성되는 2-3 mode가 지배적인 것으로 나타났다. 이러한 원인은 시간이 지나면서 사주가 발달하고, 하안침식이 되면서, 하폭이 증가하여 상대적으로 수심이 감소하면서 복렬사주가 발달하기 때문이며, Colombini 등(1987)이 이론적으로 예측한 결과와 잘 일치한다. 한 단면에서 3개의 모드가 나타나는 것은 하상에서 변화를 일으키는데 중요한 역할을 한다. 직선하도에서 사주의 수가 증가하는 것은 교호사주의 강한 비선형으로 상호작용하기 때문이다.