• Title/Summary/Keyword: 표준구분

Search Result 914, Processing Time 0.03 seconds

The method of period division and range setting for annual river discharge management (연중 하천유량 관리를 위한 기간 구분 및 관리범위 설정 방안)

  • Park, Tae Sun
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.1
    • /
    • pp.1-9
    • /
    • 2023
  • Until now, the periods of river discharge management throughout a year are divided into flood and non-flood periods, and the ranges of discharges to be managed are broadly defined from drought discharge to flood discharge. In this study, using the long-term daily discharge data from 8 points of four major rivers, we propose a method of dividing the year into several periods with the homogeneous mean and dispersion of discharges. As a result of the study, the period of through a year was different depending on the point, but it could be divided into pre-flood period, flood period, and post-flood period. And the more subdivided the period, the more decreased the ratio of the maximum discharge to the minimum discharge. In addition, in order to ensure that the discharge for a year is more than the drought discharge and less than the flood discharge, to set the range of discharge management per period as the average flow ± standard deviation for each period is proposed.

표준식쌍성의 절대량

  • Jeong, Tae-Yeon;Gang, Yeong-Un
    • Bulletin of the Korean Space Science Society
    • /
    • 2011.04a
    • /
    • pp.21.1-21.1
    • /
    • 2011
  • 우리는 분리형 쌍성 11개(원궤도 7개, 타원궤도 4개), 반분리형 쌍성 7개와 접촉형 쌍성 9개(근첩촉형 3개, 접촉형 2개, 초과 접촉형 4개)를 포함하는 27개의 다양한 종류의 표준식쌍성의 분석하여 절대량을 구하였다. 표준 식쌍성은 식쌍성의 광도곡선이 적어도 두 파장 영역 이상에서 그리고 모든 위상에서 골고루 관측되었고, 쌍성의 두 구성원 별에 대하여 시선속도 곡선이 발표된 식쌍성, 즉, 이중분광선 식쌍성 (Double line spectroscopic eclipsing binariy)으로 정의한다. 우리는 표준식쌍성의 370개의 후보에 대하여 문헌을 조사하여 관측 데이터를 확보 하였다. 이중에서 시선속도곡선과 광도곡선 자료가 동시에 존재하는 식쌍성은 80개이다. 이번 연구에서 우리는 표준식쌍성의 관측 질을 고려하여 27개의 식쌍성을 선택하여 절대량을 계산하였고, 이전 연구자들이 발표한 절대량과 비교 하였다. 이 논문에서 제시한 표준식쌍성의 유용성을 확인하기 위해 소마젤란은하에서 발견한 식쌍성의 광도곡선을 분석하여 측광학적인 해를 구하는 작업을 수행하였다. 이를 위하여 표준 식쌍성을 식쌍성의 종류별로 구분하고, 소마젤란은하에서 발견된 식쌍성 20여개를 선정하였다. 선정된 식쌍성을 표준식쌍성의 광도곡선과 형태를 비교하여 초기값을 결정하였고, 반복적인 차등보정법으로 측광학적인 해를 구하였다. 이 논문에서 제시한 표준식쌍성이 소마젤란은하에서 발견된 식쌍성들의 광도곡선의 형태를 대부분 포함하는 다양한 분포로 형성되어 있고, 이에 따른 측광학적인 해가 관측과 잘 일치함을 보여주고 있다.

  • PDF

A Classification Method for Environment-based Games (게임 환경 특성에 기반 한 분류방안)

  • Hwang, Shin-Hee;Park, Young-Ho
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.139-141
    • /
    • 2007
  • 최근, 게임시장의 활성화가 가속화 되면서 게임을 이용하는 유저들이 매우 늘어났다. 이에 따라 게임은 하나의 문화로 정립되었다. 그러나 게임문화에 맞는 정확한 분류와 표준안이 존재하지 않아 새로운 게임의 장르 구분을 명확히 하지 못하는 문제점이 생겨났다. 본 논문에서는 기존연구의 분류법으로는 구분할 수 없는 장르의 분류를 위해 기존의 게임장르 분류법을 기반으로 체계적인 분류를 더한 게임장르 분류법을 소개한다.

  • PDF

A Study on the Improvement of Evaluation Indicators for Adjusting Forestland Classification (산지구분 조정을 위한 산지특성평가 지표 개선에 관한 연구)

  • KWAK, Doo-Ahn;RYU, Keun-Won;KWON, Soon-Duk;KIM, Won-Kyung
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.19 no.1
    • /
    • pp.12-29
    • /
    • 2016
  • The purpose of this study was to improve forestland characteristic evaluation system's indicators for rational development and ecosystem conservation. There has been no consideration for statistical duplication between variables, and it caused inefficient data collection. Furthermore, the same evaluation criteria were applied for all forestlands without considering regionally different characteristics, and it made variation for designation cancel rates of preservation semi-preservation forestlands between cities. To solve these problems, we first removed 'DBH' variable which has a multicollinearity. Second, we applied standard normal distribution for each forest watershed type. As a result of eliminating 'DBH', the numbers of parcels for all grades except A were changed but their numbers and areas were not large enough to consider the change of total score. For the output of analyses with the existing same regional criteria, the total scores of urban type and urban-fringe type forestlands were higher than those of other types. The numbers of parcels for A and B were increased and those for C and E were decreased by applying standard normal distribution. This caused the increase of preservation-oriented parcels. Finally, we suggested a new evaluation method based on standard normal distribution to consider regional forest characteristics and to solve regional imbalance.

The Standard for Differentiating Service Level Urang or Regional Highway Network (성시혹구역도로망교통복무수평적화분표준)

  • Yang Peikun
    • Proceedings of the KOR-KST Conference
    • /
    • 1993.07a
    • /
    • pp.255-258
    • /
    • 1993
  • 본문제출료 일충여교통복무상태상련계적성시도로교통복무수평적화분방법, 귀납출료성시교통적오충복무상태,즉자유류, 교차구무일류, 일류은정, 일류연오저우가 접수겁한급교통엄중조새,환학인결정교통복무상태절환적인소시교차구진구도적포화도. 재차기출상, 근거유관수거급출료구분교통복무상태적포화도간치, 종이건립료화 분성시혹구역도로망교통복무수평적표준.

  • PDF

EMI/EMC 측정기술 개요

  • 정연춘;김정환;정낙삼
    • 전기의세계
    • /
    • v.38 no.9
    • /
    • pp.18-27
    • /
    • 1989
  • 국내 EMI/EMC연구는 이제 태동기에 접어들고 있다고 생각된다. 이 연구는 크게 측정과 대책에 관한 연구로 구분될 수 있을 것이나, 두 분야가 상호보완적으로 접근되어야만 보다 효과적으로 연구를 수행할 수 있으리라 여겨진다. EMI/EMC 측정기술과 측정표준에 관련된 분야만 하더라도, 매우 넓은 범위의 다양한 대상이 있기 때문에 제한된 지면으로는 시각과 다른 각도에서 보는 경우도 많이 있으리라 생각된다. 아무튼 EMI/EMC 측정기술의 이해에 조금이나마 도움이되었으면 하는 바램이다. 끝으로 국내 EMI/EMC 측정기술의 향상과 국내적인 측정 신뢰도를 확보하기 위해서 미국립표준기술원(NIST)에서 시행하고 있는 프로그램을 소개하고자 한다.

  • PDF

Calibration uncertainty of a capacitance diaphragm gauge (용량형진공계 교정 불확도)

  • 홍승수;신용현;정광화;임인태;우삼용;김정형;최상철
    • Journal of the Korean Vacuum Society
    • /
    • v.10 no.2
    • /
    • pp.173-181
    • /
    • 2001
  • We calibrated a capacitance diaphragm gauge(CDG) of 1,333 Pa range by using ultrasonic interferometer manometer (UIM) that was a national low vacuum standards system. And its uncertainties were evaluated according to International Organization for Standardization(ISO), they were named to A type uncertainty, B type uncertainty, combined standard uncertainty, and expanded uncertainty, We obtained that the combined standard uncertainties were $1.38 \times10^{-2}\; Pa\sim3.03 \times10^{-1} $Pa and the relative uncertainties(combined standard uncertainty/standard pressure) were $2.3 \times 10^{-4}\;Pa\sim7.9 X\times10^{-3} $Pa for this 1,333 Pa CDG.

  • PDF

A Design of HD-SDI Camera System for HDcctv Standard Certification (HDcctv 표준 인증을 충족하는 HD-SDI 영상카메라의 설계)

  • Han, Byung-Wan;Lim, Sung-Jun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.6
    • /
    • pp.2743-2750
    • /
    • 2012
  • The SDI technology can transmit video, audio and control data with a coaxial cable. The compatibility of HD-SDI Camera is very important. The SDI devices and products without compliance problem are able to guarantee interaction. The HDcctv Alliance has released the standard by classifying the attributes of the SDI devices and products. It is important for each SDI devices and products to keep the compatibility of this standard. In this paper, the camera system that comply with the HDcctv Standard was implemented. In order to receive certification of HDcctv Alliance, the experiment was performed and the satisfied result was gained.

Design of emulator for conformance tests of active RFID system (능동형 RFID 시스템의 표준적합성 시험용 에뮬레이터 설계)

  • Song, Tae-Seung;Lyou, Joon
    • Proceedings of the KIEE Conference
    • /
    • 2008.04a
    • /
    • pp.41-42
    • /
    • 2008
  • 무선방식으로 원격에서의 인식으로 정보교환을 가능하게 하는 RFID(Radio Frequency IDentification) 시스템은 태그 내의 배터리 유무에 따라 수동형과 능동형으로 구분된다. 수동형 태그는 판독기로부터 받은 RF 신호를 에너지로 이용하기 때문에 인식거리가 짧으며, 가격이 싸고 반영구적으로 사용할 수 있는 장점이 있다. 반면에, 능동형 태그는 금속재질에 취약한 수동형의 단점을 극복하는 동시에 인식거리가 길고, 인식률이 좋은 장점이 있다. 따라서 항만물류나 국방 분야에서 능동형 RFID 시스템에 대한 개발이 점차 확대되고 있다. 하지만 동일한 표준으로 개발된 제품의 서로 간에 인식이 불가능한 사례가 보고되고 있으며, 국제적으로 정확한 평가방법 및 장치가 정립되지 않아 개발된 제품들 간의 상호 운용성 및 표준 적합성 평가에 대한 어려움이 존재한다. 본 논문에서는 능동형 RFID 시스템의 적합성 평가를 위한 에뮬레이터의 하드웨어 및 소프트웨어를 설계하고 제작하였다. 설계된 장치는 Matlab의 Simulink를 통한 시뮬레이션으로 성능을 분석하였고, 실제 능동형 RFID 태그의 표준적합성 평가를 통해 에뮬레이터의 적용 가능성을 검증하였다.

  • PDF

Development of Quality Evaluation Model for Industrial Embedded Software (산업용 내장형 소프트웨어 품질평가 모델의 개발)

  • Lee Ha-Yong;Hwang Suk-Hyung;Yang Hae-Sool
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2006.05a
    • /
    • pp.223-226
    • /
    • 2006
  • 산업용 소프트웨어의 유형은 크게 패키지형, 내장형, 시스템형으로 구분할 수 있다. 패키지형 소프트웨어는 산업용 ERP를 의미하며, 내장형 소프트웨어는 산업용 기기에 내장되어 사용되고, 시스템형은 제조 및 생산 시스템의 전반적인 제어를 위한 소프트웨어이다. 본 연구에서는 산업용 내장형 소프트웨어를 대상으로 하여 품질시험 및 평가를 수행할 수 있는 평가모듈의 개발에 관해 기술하였다. 평가모듈의 객관성 및 타당성을 제고하기 위해서는 국제표준을 기반으로 한 체계 구축이 필수적이다. 관련된 국제표준으로는 소프트웨어 제품의 요구사항 및 평가에 관한 표준인 ISO/IEC 12119와 9126이 있으며, 평가모듈의 구성 형식을 규정하고 있는 ISO/IEC 14598-6이 있다. 이러한 표준들을 기반으로 하여 산업용 내장형 소프트웨어의 품질 요구사항을 추출하고 품질 요구의 만족 수준을 평가할 수 있는 평가 모듈을 구축하였다.

  • PDF