• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.25-30
• /
• 1992

Most algorithms in computer vision and digital photogrammetry assume that digital stereo pairs are registered in epipolar geometry. But, an aerial stereo pair is not likely to be in epiplar geometry since the attitude of the camera at the instant of exposure is different at every exposure station. In this paper, stereo digital imagery is obtained from aerial stereo pair by scanner. Then procesure to resample the digital imagery to epipolar geometry using exterior orientation elements after absolute orientation is described. As a result, a stereo imagery in epipolar geometry is produced from stereo digital imagery. Epipolar imagery in this paper is applied to the image matching method by digital image correlation technique. Then, a digital elevation model is produced from the result of image matching. The digital elevation model in this paper is compared to the other digital elevation model produced by analytical plotter. As a result, an economical method to generate digital elevation model is presented.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.141-151
• /
• 1995

In generating DTM as basic data to GIS, the use of existing map is difficult to aquire current data and the method using airphotos needs cost for stereoplotting and ground control surveying. So, the method of DTM generation by satellite imagery is promising because satellite is able to observe wide area at once. In this study the program for SPOT bundle adjustment and image matching based on Coarse to Fine method is developed and various image enhancement algorithm is used for more accurate DTM generation and also evaluation of accuracy was carried out. Further more, orthophoto, a bird's eye-view, contour map producing, net-work analysis and terrain analysis were performed for GIS applications using generated DTM in this study. Generated DTM using SPOT stereo imagery is useful for GIS applications such as automated mapping, facility management, national geographic information system. Moreover developed automatic DTM generation pro-gram is studied, tested and verified more to be applicable to all the area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.369-375
• /
• 2010

Since multi-view images can be utilized for 3D visualization and surveying as well, a system calibration is an essential procedure. The cameras in the system are mounted to the holder and their locations and attitudes are relatively fixed. Therefore, the locations and the attitudes of the perspective centers of the four oblique looking cameras can be calculated using the location and attitude of the nadir looking camera and the boresight values between the cameras. In this regard, this research is focusing on the analysis of the relative location and attitude between the nadir and oblique looking cameras based on the results of the exterior orientation parameters after the aerial triangulation of the real multiview images. We acquired high standard deviations of the relative locations between the nadir and oblique cameras. Standard deviations of the relative attitudes between the cameras were low when only the exterior orientations of the oblique looking cameras were allowed to be adjusted. Moreover, low standard deviations of the relative attitudes came when we considered not all the exterior orientations of the cameras but the attitudes of them only.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.139-146
• /
• 1987

The 3-dimensional deformation measurement by the terrestrial photogrammetry is consist of 3-dimensional coordinates computation, displaced point detection and deformation estimation of object targets. In this study, at the first step of deformation analysis, the variation of the variance-covariance matrix for the exterior orientation elements was analyzed by the increment of the ground control points and the photos in the Bundle adjustment. And then, to give the constraints for improving accuracy of ground control points, the concept of Free-Network adjustment was applied to Bundle adjustment. As a result, we knew that it was desired in the accuracy and the economy, the observation time when the numbers of ground control point and photo were respectively 6 points and 3 photos. In addition, in the case of applying the concept of Free Network adjustment in Bundle adjutment, it was desirable that the space distance for the constraints is distributed outside.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.23-28
• /
• 2022

Today, the online market has grown rapidly due to the development of digital platforms and the pandemic situation. Therefore, unlike the existing offline market, the distinctiveness of the online market has prompted users to check online reviews. It has been established that reviews play a significant part in influencing the user's purchase intention through precedents of several studies. However, the current review writing method makes it difficult for other users to understand the writer's emotions by expressing them through elements like tone and words. If the writer also wanted to emphasize something, it was very cumbersome to thicken the parts or change the colors to reflect their emotions. Therefore, in this paper, we propose a technique to check the user's emotions through facial expression recognition using a camera, to automatically set colors for each emotion using research on existing emotions and colors, and give colors based on the user's intention.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.125-132
• /
• 2010

With recent advancement of remote sensing technology, a variety of data acquisition over the same area is achievable. An automated co-registration of heterogeneous airborne images is a critical step for change detection. This paper describes an automatic method for co-registration between digital image and existing building model. Optimal building models for co-registration purpose are extracted as primitives from existing building model database. A set of homologous features between straight lines extracted from aerial digital image and model primitive are computed based on geometric similarity function. With obtained homologous features, EO parameter is recomputed using least square method. The result shows that die suggested method automatically co-register two data set in a reliable manner.

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.41-47
• /
• 2012

For competitiveness of national B2C (Business to Customer) service industry, improvement of process and analysis focused on customer and change of service system are needed. In other words, a business and an organization should deduce and provide what kind of services customers want. Then, evaluate customers' satisfaction and improve the service quality. To achieve this goal, accurate feedbacks from customers play an important role; however, there are not quantitative and standard systems a lot in nation. Recently, the researches about ICT (Information and Communication Technology) that can recognize emotion of human being are on the increase. The facial expression recognition among them is known as most efficient and natural human interface. This research analyzes about more efficient facial expression recognition and suggests a customer satisfaction feedback system using that.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.187-194
• /
• 2002

본 논문에서는 SPOT 입체영상을 이용하여 광범위한 지역의 DEM을 제작할 경우 DEM 모자이크 과정에서 발생할 수 있는 접합선(seam-line)을 최소화할 수 있는 방법을 연구하였다. 지상의 60km$\times$60km 영역을 촬영할 수 있는 SPOT 위성의 입체 영상으로부터 구성한 단일 모델은 일반적으로 관심 있는 지역의 DEM을 제작하기에 충분히 넓은 지역을 포함할 수 있다. 그러나 광범위한 지역의 DEM 제작을 위해서는, 각각의 입체영상을 통해 제작된 DEM들을 접합해야 하며, 이 때 발생되는 접합선을 효과적으로 제거하는 작업이 필요하다. 이를 위해 SPOT 위성영상의 블록 조정 방법을 이용하여 종횡접합모델을 구성하고 중복되는 인접한 SPOT DEM간의 표고값을 일치시키므로써 DEM 접합선의 발생을 최소화하여 모자이크시 작업량을 줄이고자 한다. 본 논문에서는 기존의 지상기준점과 추가로 관측한 영상접합점을 이용하여 종횡접합 블록을 구성하고 광속조정 방법을 적용하여 블록에 포함된 위성영상의 외부표정요소를 계산하였다. 블록모델을 이용하여 DEM을 제작할 경우 접합선 탐색 및 blending 작업 없이 단순중첩 방법으로도 DEM 모자이크 작업을 빠르게 수행할 수 있음을 확인하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.1-3
• /
• 2010

수중 무인항체(Autonomous Underwater Vehicle, AUV)를 고정밀, 고위험 임무수행 분야에 이용하기 위해서는 연속적이고 정확한 항법정보를 제공하는 기술이 반드시 필요하다. 특히, 최근에는 항공분야에서 국내외적으로 연속적이고 정확한 항법정보를 제공하기 위하여 여러 가지 센서를 결합한 통합 항법시스템에 관한 연구가 활발하며, GPS나 음향장치를 관성센서와 통합하는 방법이 대표적이다. 하지만 수중 무인항체에 경우는 해수면 노출로 인한 탐사시간 장기화와 음향장치 설치 및 회수의 한계로 인하여 GPS나 음향장치 이외에 센서를 이용한 통합 항법시스템의 필요성이 커지고 있다. 본 논문에서는 자율성이 높으면서, 적은 비용으로 설치가 가능한 영상센서를 이용하여 항법성능을 효과적으로 증대시키는 Vision/INS 통합 항법을 제안한다. 제안한 통합 항법알고리즘은 외부표정요소 직접결정기법을 이용하여 영상 데이터로부터 항체의 위치와 자세를 추정하고, 추정된 결과를 INS의 추정치와 비교한다. 그리고 추정한 위치와 자세오차를 입력으로 칼만필터를 구동하도록 설계하였다. 모의실험을 통해 제안한 방법의 유효성을 확인하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.249-254
• /
• 2006

Aerial photo process with digital camera has some benefits. It is fast and simple by digital way in comparison with aerial photo based on film. Also it works with GPS/INS device to do direct geo-referencing, In this study, AT result from using direct exterior factors, exterior factors extracting from GPS/INS data and digital map and GCP is produced. In base on it, ortho images are produced and compared with surveying data.