• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.123-133
• /
• 2008

Information collection systems and applications in a ubiquitous environment has emerged as a leading issue in transportation and logistics. A productive application example is a traffic information collection system based on probe vehicles and wireless communication technology. Estimation of hourly OD pairs using probe OD data is a possible target. Since probe OD data consists of sample OD pairs, which vary over time and space, computation of sample rates of OD pairs and expansion of sample OD pairs into static OD pairs is required. In this paper, the authors proposed a method to estimate sample OD data with probe data in Jeju City and expand those into static OD data. Mean absolute percentage difference (MAPD) error between observed traffic volume and assigned traffic volume was about 22.9%. After removing abnormal data, MAPD error improved to 17.6%. Development of static OD estimation methods using probe vehicle data in a real environment is considered the main contribution of this paper.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.33-40
• /
• 2010

In this paper, we consider three macroscopic traffic flow monitoring indices, Travel Time Index(TTI), Acceleration Noise(AN) and Two Fluid(TF) and investigate how to determine a proper rate of probe cars for producing reliable values of these indices. For the analysis, we use classical sampling theories and provide numbers of probe rates using simulation data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.133-141
• /
• 2021

The probe vehicle penetration rate is a required parameter in the estimation of entire volume, density, and queue length from probe vehicle data. The previous studies have proposed estimation methods without point detectors, which are based on probability structures for the locations of probe and non-probe vehicles; however, such methods are poorly suited to the case of multi-lane streets. Therefore, this study aimed to estimate the probe vehicle penetration rate at a multi-lane intersection and introduce a probability distribution of the queue length of each lane. Although a gap between estimates and observations was found, the estimates followed the trend of observations; the estimation could be improved by the correction factor hereafter. This study is expected to be used as a basic study for the estimation of entire volume, density, and queue length at multi-lane intersections without point detectors.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.135-145
• /
• 2008

As a fundamental input to the travel demand forecasting, OD has been always a concern in obtaining the accurate link traffic volume. Numerous methods were applied thus far without a complete success. Some existing OD estimation techniques generally extract regular samples and expand those sample into population. These methods, however, leaves some to be desired in terms of accuracy. To complement such problems, research on estimating OD using additional information such as link traffic volume as well as sample link use rate have been accomplished. In this paper, a new approach for estimating static origin-destination (OD) using probe vehicle has been proposed. More specifically, this paper tried to search an effective sample rate which varies over time and space. In a sample test network study, the traffic volume error rate of each link was set as objective function in solving the problem. As a key result the MAE (mean absolute error) between expanded OD and actual OD was identified as about 5.28%. The developed methodology could be applied with similar cases. Some limitations and future research agenda have also been discussed.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.137-145
• /
• 2007

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.208-221
• /
• 2020

The objective of this study is to estimate and analyze the traffic density of continuous flow using the trajectory of individual vehicles and the headway of sample probe vehicles-front vehicles obtained from ADAS (Advanced Driver Assitance System) installed in sample probe vehicles. In the past, traffic density of continuous traffic flow was mainly estimated by processing data such as traffic volume, speed, and share collected from Vehicle Detection System, or by counting the number of vehicles directly using video information such as CCTV. This method showed the limitation of spatial limitations in estimating traffic density, and low reliability of estimation in the event of traffic congestion. To overcome the limitations of prior research, In this study, individual vehicle trajectory data and vehicle headway information collected from ADAS are used to detect the space on the road and to estimate the spatiotemporal traffic density using the Generalized Density formula. As a result, an analysis of the accuracy of the traffic density estimates according to the sampling rate of ADAS vehicles showed that the expected sampling rate of 30% was approximately 90% consistent with the actual traffic density. This study contribute to efficient traffic operation management by estimating reliable traffic density in road situations where ADAS and autonomous vehicles are mixed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.29-41
• /
• 2017

In this study, we used individual trip data to estimate a macroscopic fundamental diagram (MFD) that relates flow (or production) to density (or state) in Daegu metropolitan city. The individual trip data were generated by processing data that were collected from DSRC-based (dedicated short range communication) traffic data collection system. Using the processed individual trip data, we first examined whether the assumptions for MFD are valid, and then the relation between outflow and accumulation was estimated in our study site. As a result, we found that i) the assumptions are valid to construct MFD; and ii) the reproducible and well-defined MFDs exist in the network level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2018

With the increasing popularity of electronic toll collection system using 5.8 GHz dedicated short-range communications (DSRC) technology, DSRC-based travel-time collection systems have been deployed on major urban and rural arterial routes in Korea. However, since probe sample sizes are frequently insufficient in probe-based systems, the gathered travel times from probe vehicles fluctuate significantly compared to those of the population; as a result, the accuracy of the collected travel times could decrease. To mitigate the fluctuations (also known as biases), smoothing techniques need to be applied. In this study, some smoothing techniques-moving average, the Loess, and Savitzky-Golay filtering-were applied to probe travel times. Resultantly, the error in the smoothed travel times at the lowest sampling plan (5%) decreased as much as 45% compared to those in non-smoothed travel times. The results of this study can be practically applied to probe-based travel-time estimation systems for providing reliable travel times along the travel corridor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.625-637
• /
• 2015

This study aims to calculate optimal travel speeds based on analysis of the AVI data collected in the uninterrupted traffic flow, and the results are as follows. Firstly, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. Secondly, there were differences among type 1(passenger automobiles) & type 2(automobiles for passengers and freight) and type 4(special automobiles) in the non-congestion section. thus it was revealed that there is a necessity to remove type 4(special automobiles) when calculating the sectional travel speeds. Thirdly, Based on the results of these, the optimal outlier removal procedures were applied to this study. As a result, it showed that the MAPE was between 0.3% and 2.0% and RMSE was between 0.3 and 2.3 which are very similar figures to the actual average traffic speed. Also, the minimum sample size was satisfied at the confidence level of 95%. The result of study is expected to serve as a useful basis for the local government to build the AVI. In the future, it will be necessary to study to integrate AVI data and other data for more accurate traffic information.