• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.340-341
• /
• 2006

입자분포가 서로 다른 분체를 소수화 및 친수화 표면을 갖도록 표면개질을 하여 solid casting으로 성형하여 소결함으로써 계면장력에 의한 전기적 반발로 자기배열 구조를 갖는 다층 다공질 구조의 세라믹 담체의 제조가 가능하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.359-370
• /
• 2015

The present study aims to numerically investigate the behavior of liquid droplet driven by capillarity force imbalance on horizontal surfaces ranging from hydrophilic to hydrophobic, under various conditions. The droplet behavior has been simulated using an in-house solution code(PowerCFD), which employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The detailed droplet behavior was obtained under various conditions for droplets with different initial shapes, contact angles and surface tension forces(or Bond number). The mechanism of droplet transport was examined using the numerical results on the droplet shapes.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1058-1065
• /
• 2017

Amino acid based surfactants as protein-surfactants is eco-friendly compound. So, amino acid based surfactants is expected as next generation surfactants. Amino acid based surfactants has high biodegradability, low toxicity and surface active properties. In this experiment, amino acid based surfactants, cocoyl glycine, was synthesized by glycine and triglyceride such as coconut oil and palm oil. And it was tested the surface tension, emulsifying properties, foam stability and HLB value. The synthesized surfactants was confirmed by FT-IR. Surface tension of surfactants synthesized by coconut oil on diluted aqueous solutions of surfactants was 31.2 dyne/cm at $1.0{\times}10^{-4}mol/L$. Surface tension of surfactants synthesized by palm oil on the diluted aqueous solutions of surfactants was 42.1 dyne/cm at $3.2{\times}10^{-5}mol/L$. Foam stability measured the foam height as time passed. Initial foam height of surfactants synthesized by coconut oil is 14.5 cm, and 10.7 cm after five minutes. Initial foam height of surfactants synthesized by palm oil is 3.0 cm, and 2.8 cm after five minutes. Foam height of surfactants synthesized by coconut oil was higher than surfactants synthesized by palm oil. But foam stability of surfactants synthesized by palm oil was better than surfactants synthesized by coconut oil. The emulsifying properties of synthesized surfactants are observed in benzene and soybean oil and emulsifying properties in organic solvent is better than in soybean oil.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.303-309
• /
• 2008

Dense and fine polymer patterns often collapse, as they come into contact with each other at their protruding tips. Resist pattern collapse depends on the aspect ratio of patterns and the surface tension of rinsing materials. The pattern collapse is a very serious problem in microfabrication, because it is one of the factors which limit the device dimensions. The reasons for the pattern collapse are known as the surface tension of rinse liquid, centrifugal force and rinse liquid flow produced in the developing process. In this work, we tried to evaluate the pattern collapse of three-dimensional microstructures that were fabricated by two-photon induced photopolymerization, and showed the way how to reduce the deformation of microstructures.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1993

수지이동 성형공정에서 수지가 섬유직조망에 함침될 때의 투과계수와 수지의 표면 장력으로 인하여 유동진전면에서 발생하는 모세관압을 실험적으로 측정하였다. 두 종류의 섬유조직망에 대해서 가공율이 증가함에 따라투과계수는 증가한다. 수지, 섬유 그리고 공기 가 서로 다른 세 개의 상을 구성함으로써 수지의 표면장력의 영향을 받는 비정상상태의 투 과계수가 수지의 섬유직조망에 포화된 정상상태에서 측정된 투과계수보다 본 실험에서 수행 된 모든 기공을 범위에서 크다는 것을 보여주었다. 수지 유동진전면에서 발생되는 모세관압 은 기공율이 감소함에 따라 증가하였고 섬유직 조망의 기공율이 0.469인 경우에는 금형입구 에서의 수지주입압력의 25%에 해당되는 모세관압이 발생되는 것으로 나타났다. 따라서 모 세관압을 가공조건으로 고려해다 한다는 것을 제시할수 있었다. 또한 본연구에서 사용된 임 의 배향 섬유직조망에 대해 실리콘 오일과 유리섬유 계면의 동적접촉각 측정을 통하여 섬유 배향 및 기공의 분포를 나타내는 형상인자의 값을 구함으로써 실제 RTM 공정에서 발생되 는 모세관압을 예측할 수 dLT는 기초자료를 제시하였다.

• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.205-207
• /
• 1972

Dodecylquinolinium bromide has been synthesized and the critical micelle concentrations of it in the aqueous solution have been determined by the measurement of the surface tension and the electrical conductance. The values are $3.34 {\times} 10^{-3}mole/l$ and 3.41 {\times} $10^{-3}$mole/l, respectively. Since dodecylquinolinium bromide has the larger hydrophobic group than dodecylpyridinium bromide, it is considered that the former has the smaller critical micelle concentration than the latter.

• Journal of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.30-32
• /
• 1964

H. Eyring등의 액체의 구조에 관한 이론에 따라서 액체 사염화탄소의 partition function을 정하였다. 이 Partition function 에 쓰인 parameter $E_s,\;{\sigma},\;{\theta},\;V_s$ 등은 액체 안의 고체와 같은 분자의 고요한 값으로 새로운 방법$^{(4)}$으로 그 값들을 정하였다. 이렇게 정해진 Partition function을 써서 액체 사염화탄소의 몰부피, 증기압, 한계점, 증발엔트로피 및 표면장력 등을 계산하였다. 계산치와 실측치를 비교한 결과 몰부피와 증기압, 엔트로피의 값은 거의 일치하였다. 표면장력 또한 실험치와 좋은 일치를 보여주는 값을 얻었다.

• Journal of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.110-112
• /
• 1965

The surface tension of liquid iodine was measured by differential capillary rise method at various temperatures above the melting point. A paraffin bath with mercury regulator was used to maintain constant temperature. The height of the meniscus of liquid iodine in the capillary tube was measured by a travelling microscope. The measured values of surface tensions at $125.0^{\circ},135.0^{\circ}, 145.0^{\circ}$ and $155.0^{\circ}$ were 36.88, 35.87, 34.83 and 34.04 dyne/cm, respectively. Calculated Eotvos constant from the surface tension, data. experimentally obtained, were consistent through the temperature range.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.05a
• /
• pp.244-245
• /
• 2001

산폐유의 농도를 l~8% 까지 단계별로 조정하여 P. aeruginosa EMS1과 mutant strain A34의 유화활성 및 생육도, 표면장력 등을 서로 비교하였다. P. aeruginosa의 경우 1%의 산폐유가 첨가되었을 때 유화활성이 가장 높았으며, 1~3%까지 유화활성이 높게 나타났으며, mutant strain의 경우 2%에서 가장 높은 유화활성 값을 나타내었고, 1~3%까지 유화활성이 높게 유지되었다. P. aeruginosa EMS1 및 mutant strain A34 모두 4% 농도에서 가장 높게 나타났다. 표면장력과 biosurfactant의 상대적인 양을 나타내는 Fcmc의 경우 P. aeruginosa EMS1 보다 mutant strain A34가 우수하게 나타났다. PCR 결과 P. aeruginosa EMS1은 rhlamnolipid의 coding 유전자인 rhlRAB gene을 가지는 것으로 확인되었다.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.70-76
• /
• 2013

The present paper proposes a coupled volume-of-fluid (VOF) and level-set (LS) method for simulating incompressible two-phase flows that include surface tension effects. The interface of two fluids and its motion are represented by a VOF method designed using high-resolution differencing schemes. This hybrid method couples the VOF method with an LS distancing algorithm in an explicit way to improve the calculation of the normal and curvature of the interface. It is developed based on a rather simple algorithm to be efficient for various practical applications. The accuracy and convergence properties of the method are verified in a simulation of a single gas bubble rising in a three-dimensional flow with a large density ratio.