• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.132-140
• /
• 2007

The phase-shift method and correlation constants for studying a linear relationship between the behavior ($-{\varphi}\;vs.\;E$) of the phase shift ($0^{\circ}{\leq}-{\varphi}{\leq}90^{\circ}$) for the optimum intermediate frequency and that (${\theta}\;vs.\;E$) of the fractional surface coverage ($1{\geq}\theta{\geq}0$) have been proposed and verified to determine the Langmuir, Frumkin, and Temkin adsorption isotherms (${\theta}\;vs.\;E$) at noble metal/aqueous electrolyte interfaces. At an Ir/0.1 M KOH aqueous electrolyte interface, the Langmuir and Temkin adsorption isotherms (${\theta}\;vs.\;E$), equilibrium constants ($K=3.3{\times}10^{-4}\;mol^{-1}$ for the Langmuir and $K=3.3{\times}10^{-3}{\exp}(-4.6{\theta})\;mol^{-1}$ for the Temkin adsorption isotherm), interaction parameter (g = 4.6 for the Temkin adsorption isotherm), and standard free energies (${\Delta}G_{ads}^0=19.9kJ\;mol^{-1}\;for\;K=3.3{\times}10^{-4}\;mol^{-1}$ and $16.5<{\Delta}G_{\theta}^0<23.3\;kJ\;mol^{-1}\;for\;K=3.3{\times}10^{-3}{\exp}(-4.6{\theta})\;mol^{-1}\;and\;0.2<\theta<0.8$) of H for the cathodic $H_2$ evolution reaction are determined using the phase-shift method and correlation constants. The inhomogeneous and lateral interaction effects on the adsorption of H are negligible. At the intermediate values of ${\theta},\;i.e,\;0.2<{\theta}<0.8$, the Temkin adsorption isotherm (${\theta}\;vs.\;E$) correlating with the Langmuir or the Frumkin adsorption isotherm (${\theta}\;vs.\;E$), and vice versa, is readily determined using the correlation constants. The phase-shift method and correlation constants are accurate and reliable techniques to determine the adsorption isotherms (${\theta}\;vs.\;E$) and related electrode kinetic and thermodynamic parameters(K, g, ${\Delta}G_{ads}^0, {\Delta}G_{\theta}^0$).

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.113-117
• /
• 2016

Recently, hydrogen is regarded as important energy in the future, because it is clean and renewable. The photoelectrochemical (PEC) system, which produce hydrogen using water splitting by solar energy, is one of the most promising energy systems because it has abundant energy sources and good theoretical efficiency. GaN has recently been regarded as suitable photoelectrode that could be used to split water to generate hydrogen without extra bias because its band edge position include water redox potential ($V_{redox}=1.23$ vs. SHE). GaN also shows considerable corrosion resistance in aqueous solutions and it is possible to control its properties, such as structure, band gap, and catalyst characteristics, in order to improve solar energy conversion efficiency. But, even if the band edge position of GaN make PEC reaction facilitate without bias, the overpotential of oxygen evolution reaction could reduce the efficiency of system. One of the ways to decrease overpotential is introduction of co-catalyst on photoelectrode. In this paper, we will investigate the effect of manganese dioxide ($MnO_2$) as a co-catalyst. $MnO_2$ particles were dispersed on GaN photoelectrode by spincoater and analyzed properties of the PEC system using potentiostat (PARSTAT4000). After coating $MnO_2$, the flat-band potential ($V_{fb}$) and the onset voltage ($V_{onset}$) were moved negatively by 0.195 V and 0.116 V, respectively. The photocurrent density increased on $MnO_2$ coated sample and time dependence was also improved. These results showed $MnO_2$ has an effect as a co-catalyst and it would enhance the efficiency of overall PEC system.

• Journal of Veterinary Clinics
• /
• v.30 no.5
• /
• pp.339-345
• /
• 2013

Mitogen-activated protein kinases (MAPKs) are a family of central signaling molecules that respond to numerous stimuli and are known to participate in processes of cell survival and death. However, it is not clear on data for cell-type specific activation of MAPKs in the progression of gastric ulcer. In the present study, we assessed how MAPKs localized at various cell types during the progression of gastric ulcer induced by ibuprofen. Gastric ulcer was induced by the repeated treatment of 200 mg/kg ibuprofen with 8 hrs interval in a day. Animals were sacrificed at 24 hrs, 48 hrs, and 72 hrs after oral treatment of ibuprofen and gastric tissues were subjected to immunohistochemical and immunoblotting evaluation. Immunoreactivity of phospho-extracellular signal-regulated kinase (p-ERK) was mainly expressed at the proliferating zone of gastric mucosa in control rats. But, these signals for p-ERK were highly shifted from cells of proliferating zone to parietal cells of the basal regions 24 hrs after treatment of ibuprofen. p-ERK signal was strongly expressed in epithelial cells adjacent to ulcer margin and new capillary and infiltrated inflammatory cells within granulation tissue of the ulcer base above 48 hrs after treatment of ibuprofen. While, phospho-c-Jun $NH_2$ terminal kinase (p-JNK) was mainly localized to the nuclei of the surface epithelial cells and the glandular epithelial cells in early gastric injury. Also, p-JNK was often observed as a scattered pattern in different regions of gastric mucosa with early gastric injury. Gradually, signal of p-JNK was strongly stained in infiltrated inflammatory cells and fibroblasts within severe ulcer base. Phospho-p38 (p-p38) MAPK was observed as scattered pattern within connective tissues of gastric mucosa. Especially, p-p38 MAPK showed strong signal in infiltrated macrophages within ulcer base. These results show that each MAPK has a specific role in various cell types during the progression of gastric ulcer.

• Journal of Food Hygiene and Safety
• /
• v.17 no.1
• /
• pp.36-44
• /
• 2002

GC-l00X is non-corrosive alkaline ionic water (pH 12). It is composed of hydroxyl radicals and supplemented with xylitol. Its antimicrobial activity was examined against 6 major food-borne pathogens; Staphylococcus aureus FRI 913, Salmonella enterica serova Enteritidis ATCC 13076, S. enterica serova Typhimurium Korean isolate, Vibrio parahaemolyticus ATCC 17803, Escherichia coli O157:H7 ATCC 43894 and Pseudomonas aeruginosa KCTC 1637 at three different temperatures (4$^{\circ}C$, $25^{\circ}C$ and 36$^{\circ}C$) with or without an organic material (2% yeast extract), respectively. The antimicrobial activities showed over 4 log-reductions (1.0$\times$10$^4$CFU/ml reduction) against all pathogens reacted at 37$^{\circ}C$ for 3 hours in the absence of the organic material. The activities showed same results when GC-l00X was diluted with same volume of distilled water or standard hard water (CaCO$_3$300 ppm). Its antimicrobial activity was more effective and quicker in Gram-negative bacteria than Gram-positive bacteria. Its washing efficacy against E. coli O157:H7 exposed to the surfaces of tomatoes (grapes) was compared with that of the other sanitizers such as other kitchen synthetic detergent and 100-ppm chlorine water. For the toxicological evaluation of the sanitizers, viable counts of E. coli O157:H7 penetrated into the core of tomatoes after washing products were also compared. The result revealed that GC-100X stock solution and its 5% diluted solution had similar washing effects to 100-ppm chlorine water and more effective than the other kitchen synthetic detergent. This result indicated that GC- l00X had antimicrobial activity and no toxicological side effects, therefore, could be useful for a new sanitizer to use in flood safety and kitchen hygiene.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.158-166
• /
• 2017

The object of this study was to improve tomato seedling quality in low temperature(below 7, $10^{\circ}C$ during night time or daily mean air temperature was $18^{\circ}C$) by application of silicate fertilizer. Six different silicate fertilizer concentrations (8, 16, 32, 64, 128, and 256mM) or water as the control were applied to tomato seedlings twice a week for 20 days. Positive effects were observed in the growth parameters of the seedlings treated with 16 and 32mM silicate fertilizer; the most effective concentration of silicate at which seedlings showed the best performance was 16mM. However, a high concentration of silicate (256mM) caused negative effects on the growth. The transpiration rate decreased alongside with the increase of silicate concentration up to 32mM, possibly due to the increased stomatal diffusive resistance. Silicate stimulated the growth and development of tomato seedlings, resulting in increased growth parameters and root morphology. However, no significant differences were observed among treatment numbers of soil-drenching wuth the silicate (6, 10, or 20 times with 16mM) for 20 days, suggesting that silicate treatment with 6 times may be sufficient to induce the silicate effects. The application of 16mM of silicate fertilizer reduced relative ion leakage and chilling injury during low temperature storage. In addition, the seedlings treated with silicate fertilizer recovered faster than those without silicate treatment after low temperature storage.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.15-20
• /
• 2004

Pleurotus ostreatus, the oyster mushroom, is one of the most widely cultivated and important edible mushrooms in the world. In order to study the developmental process of P. ostreatus and its regulatory mechanism, a new culturing method needs to be established for inducing the fruiting body and sporulation in the laboratory. In this study, we have examined whether the fruiting body of P. ostreatus can be formed on the plastic petri dish which are commonly used for cell culture in the laboratory. The strain was cultured on $60{\times}15mm$ plastic petri dish with potato dextrose agar media at $28^{\circ}C$ for mycelial growth and then at $18^{\circ}C$ for the formation of primordia and fruiting bodies within plant growth chamber. The development of primordia into fruiting bodies was achieved on cultured dishes under air ventilation. At the primordia stage, the normal formation of fruiting body was blocked by sealing the plastic dish with parafilm. The periods requiring for the formation of primordia and fruiting bodies were examined on the dish culture. About 96% and 76% of cultured samples formed primordia and fruiting bodies under the optimal conditions during ten weeks of culture, respectively. These culturing periods, however, were changed by the mechanical injury treatment to mycelia. As other factors affecting the fruiting body formation, the effects of light and cold shock have been tested. No fruiting formation was observed on the cultured dishes under the dark. The cold shock treatment by storing cultured dishes for one day at $4^{\circ}C$ did not have any significant effects in the fruiting body formation. Spores of fruiting bodies acquired from the petri dishes could be germinated on culture media at $28^{\circ}C$. These results suggest that the fruiting bodies of P. ostreatus can be formed on the experimental petri dish and this dish-culturing method is useful for understanding of the developmental process of P. ostreatus in the laboratory. Furthermore, the dish-culturing method is able to shorten the life cycle of P. ostreatus without requiring large area and expensive device.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.54-60
• /
• 2009

The purpose of this study is to analyze the impacts of three-dimensional land cover on changing urban air temperatures and to explore some strategies of urban landscaping towards mitigation of heat build-up. This study located study spaces within a diameter of 300m around 24 Automatic Weather Stations(AWS) in Seoul, and collected data of diverse variables which could affect summer energy budgets and air temperatures. The study also selected reflecting study objectives 6 smaller-scale spaces with a diameter of 30m in Chuncheon, and measured summer air temperatures and three-dimensional land cover to compare their relationships with results from Seoul's AWS. Linear regression models derived from data of Seoul's AWS revealed that vegetation volume, greenspace area, building volume, building area, population density, and pavement area contributed to a statistically significant change in summer air temperatures. Of these variables, vegetation and building volume indicated the highest accountability for total variability of changes in the air temperatures. Multiple regression models derived from combinations of the significant variables also showed that both vegetation and building volume generated a model with the best fitness. Based on this multiple regression model, a 10% increase of vegetation volume decreased the air temperatures by approximately 0.14%, while a 10% increase of building volume raised them by 0.26%. Relationships between Chuncheon's summer air temperatures and land cover distribution for the smaller-scale spaces also disclosed that the air temperatures were negatively correlated to vegetation volume and greenspace area, while they were positively correlated to hardscape area. Similarly to the case of Seoul's AWS, the air temperatures for the smaller-scale spaces decreased by 0.32% ($0.08^{\circ}C$) as vegetation volume increased by 10%, based on the most appropriate linear model. Thus, urban landscaping for the reduction of summer air temperatures requires strategies to improve vegetation volume and simultaneously to decrease building volume. For Seoul's AWS, the impact of building volume on changing the air temperatures was about 2 times greater than that of vegetation volume. Wall and rooftop greening for shading and evapotranspiration is suggested to control atmospheric heating by three-dimensional building surfaces, enlarging vegetation volume through multilayered plantings on soil surfaces.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.366-380
• /
• 1993

Quercus acutissima ectomycorrhizae were classified as apical type, linear type, clavate type, diffuse type, pyramidal type, coralloid type, and nodular type. The surface texture of the fungal mantle at the initial stage of mycorrhizal formation was velvety. The surface texture of Pisolithus tinctorius(Pt) mycorrhizae at 30 September was well-developed felty mantle, Yellowish white. Except Pt all mycorrhizae formed by ectomycorrhizal fungi used to experiment were white with felty mantle. Mycorrhizae at the initial stage of mycorrhizae formation were creamy or creamy brown and swelled with thin mantle. Transverse and longitudinal sections showed radially-elongated cortical cell layers and epidermal cell with Hartig net. The transversal wideth of radially-elongated cortical and epidermal cells in the mycorrhizae with thick mantle on 30 September did not different with the mycorrhizae with thin mantle on the initial stage. Pt #250 formed coralloid mycorrizae but Pt KJ-1 did not although they are same species. On the mean length of linear type ectomycorrhizae of Pt KJ-1(2.21mm) was 1.5 times longer than that of Pt #250(1.32mm). The total dry weight of seedlings inoculated with Pt KJ-1, Pt #250, Lycoperdon pedicellatum, Scleroderma verrucosum were significantly heavier than those of suillus granulatus, Laccaria laccata.