• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.47.2-47.2
• /
• 2010

For reducing outer reflection in mono-crystalline silicon solar cell, wet texturing process has been adapted for long period of time. Nowadays mixed solution with potassium hydroxide and isopropyl alcohol is used in silicon surface texturing by most manufacturers. In the process of silicon texturing, etch rate is very critical for effective texturing. Several parameters influence the result of texturing. Most of all, temperature, process time and concentration of potassium hydroxide can be classified as important factors. In this paper, temperature, process time and concentration of potassium hydroxide were set as major parameters and 3-level test matrix was created by using robust design for the optimized condition. The process optimization in terms of lowest reflection and stable etch rate can be traced by using robust design method.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.388-393
• /
• 1998

The effects of surface area of $UO_2$ pellets($s:0.034{\sim}0.282cm^2/g-UO_2$), concentration of nitric acid(1.5~10N) and temperature($40{\sim}105^{\circ}C$) on the dissolution rate were investigated in this experiment. The results showed that dissolution rate of $UO_2$ pellets was in direct proportion to effective surface area(s) and well fit to linear plot in high surface area. The dissolution rate was expressed as dc/dt = 10.6s at $90^{\circ}C$, [$HNO_3$]=8N, and proportioned to the power 1.42 of $HNO_3$ concentration. And also, the results showed that dissolution rate was sharply increased according to temperature increase in temperature below $90^{\circ}C$, but decreased in temperature above $90^{\circ}C$. Activation energy(E) was evaluated to be 36.3KJ/mol.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.359-363
• /
• 1997

We have investigated the surface characteristics of n-GaAs (100) treated with Ar plasma (40 W, 5~120 sec) by photoreflectance (PR) measurement. With increasing Ar plasma treatment time, the intensity of $E_0$ peak observed to the minimum at 5 sec. The surface electric field ($E_0$), net carrier concentration ($N_P-N_A$), and surface state density ($Q_{SS}$ are $1.05{\times}10^5V/cm$ and $1.31{\tiems}10^{17}cm^{-3}$ and $1.64{\times}10^{-7}C/m^2$, respectively. These values were about 57.1, 81.4 and 56.9% smaller than those of bulk n-GaAs. On the other hand, the concentration of compensation centers ($N_A$) was maximum with value of $5.75{\times}10^{17}cm^{-3}$ at 5 sec. And penetration depth of defects generated after treated with Ar plasma was about 450 $\AA$ from surface.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.307-313
• /
• 2008

The yeast surface expression system, pCTXYN (6.8 kb), of Bacillus endoxylanase gene (xynB, 642 bp) was constructed and introduced into Saccharomyces cerevisiae EBY100 cell. The transformed yeast cell showing the highest endoxylanase activity was selected through the active staining of colonies grown on YPDG medium containing xylan. With the yeast transformant, EBY100/pCTXYN, grown on galactose containing medium, it was found that the endoxylanase was successfully displayed on the yeast cell surface and the xylooligosaccharides were efficiently produced from xylan. The most of endoxylanase activity was detected in the cell fraction and reached about 1.9 unit/mL after 48 h cultivation. The optimized conditions for xylooligosaccharides production from xylan were determined as follows: substrate and its concentration, oat spelt xylan 6%; concentration of yeast whole-cell, 5 unit/mL; temperature, $50^{\circ}C$, and reaction time $2{\sim}4\;h$. When the oat spelts xylan and corncob xylan were hydrolyzed by treatment with cell surface-displayed endoxylanase, xylotriose was formed as a main product.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.266-270
• /
• 1998

The Ag-treated activated carbon was prepared by the impregnation of Ag on the home made activated carbon. We investigated the nitrogen adsorption property, surface structure, and antibacterial activity of the carbon. The BET surface areas of Ag impregnated activated carbon are distributed to $740-1112.2m^2/g$ region. The results of nitrogen adsorption property show that BET surface areas move gradually to lower value with increasing $AgNO_3$ mole concentration. From the SEM results, we observed window blocking effect for micropores of external surface of adsorbent by Ag impregnation. Escherichia coli which is a kind of colon bacillus was used as bacteria for antibacterial test. From these results, we also observed that activity increase gradually to larger range with increasing $AgNO_3$ mole ratio.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.177-184
• /
• 1998

The contact angle on powder hydrophobic polymer PMMA(polymethylmethacrylate), PVC(poly vinyl chloride) and hydrophilic metal aluminium was measured by wicking method on the base of Washburn equation for water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol, methanol, and for anionic surfactant SDS(sodium dodecyl sulfate) and cationic surfactant CATB(cetyl trimethylamonium bromide) aqueous solution with concentrations. The values of ${\gamma}_c$ estimated by Zisman plot and adhesion tension plot for contact angle with organic liquids, SDS, and CTAB aqueous solutions were 43.5, 28.3, and $36.2mNm^{-1}$ for PMMA and 44.2, 25.0, and $34.8mNm^{-1}$ for PVC, respectively. From the results, it was considered that wettability and characteristics of solid surface were transformed by adding surfactant. The surface free energy, ${\gamma}_s$ and its components of PMMA, PVC, and aluminium were determined using harmonic equation.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.302-308
• /
• 2012

The objective of this study is to investigate optimum reaction conditions for the grafting of poly($N$-vinyl- 2-pyrrolidone) (PVP) onto the surface of plasma-treated polypropylene film. The plasma treatment conditions were fixed as 200 W rf power, 6 LPM Ar flow rate, 30 sec treatment time, and 5 min exposure time after treatment. For graft copolymerization, we investigated the change of grafting degree with respect to reaction time, reaction temperature and $N$-vinyl-2-pyrrolidone concentration. Maximum grafting degree was obtained at the conditions of 6 h reaction time, $90^{\circ}C$ reaction temperature, and 40% $N$-vinyl-2-pyrrolidone concentration. The introduction of PVP was confirmed by ATR-FTIR, XPS, and SEM analysis.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.175-186
• /
• 2005

An electrodialysis process was operated for a long period to investigate the scale formation on the membrane surface. During the desalination process, concentration of $Ca^{2+}$ and $SO_4^{2-}$ ions increased continuously in the concentrate compartment and eventually caused precipitation on the cation exchange membrane (Neosepta CMX) surface. During the initial scale formation, the performance of the process and membrane characteristics did not show significant changes, except the decrease in limiting current density of the CMX membrane occurring due to increase in the salt concentration in the concentrate compartment. Eventually, the limiting current density of the fouled CMX membrane dropped significantly to $300\;A/m^2$ as water dissociation occurred in the CMX membrane. It was concluded that the fouling was caused mainly by the scale formation on the cation exchange membrane surface in the concentrate and consequent water dissociation. Also the scale formation was reasonably predicted by the solubility of $CaSO_4$.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.482-486
• /
• 2005

The biodegradable poly(${\varepsilon}$-caprolactone)(PCL)/poly(ethylene imine)(PEI) microcapsules containing $Al_2O_3$ and fragrant oil were prepared with different PEI contents. The effects of stirring rate and concentration of the surfactant on the diameter and morphologies of microcapsules were investigated by using scanning electron microscope (SEM). Thermal behaviors were studied by using a differential scanning calorimetry(DSC), and the release behaviors of fragrant oil from microcapsule were characterized by UV/vis. spectrophotometer. As a result, the average particle size of the microcapsules decreased with increasing the stirring rate or concentration of the surfactant. The surface morphologies of the microcapsules were changed from smooth surfaces to skin-like rough surfaces as increasing the PEI content. These results were mainly due to the increased hydrophilic groups at the microcapsule surfaces, resulting in increasing the release rate of fragrant oil in the microcapsules studied.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.390-395
• /
• 2012

Response surface methodology was used to monitor the characteristics of Corni fructus. A maximum electron donating ability of 81.27% was obtained at 119.71 W of microwave power, 7.71% of ethanol concentration, and 4.21 min of extraction time. The maximum inhibitory effect on tyrosinase was 105.92% at 143.36 W of microwave power, 58.19% ethanol concentration, and 6.71 min of extraction time. The maximum superoxide dismutase like activity was 87.08% under the extraction conditions of 107.33 W of microwave power, 96.14% ethanol concentration, and 31.49 min of extraction time. The total polyphenol content showed a maximum of 475.86 mg% at 140.29 W of microwave power, 27.44% ethanol concentration, and 58.69 min of extraction time. Based on the superimposition of four-dimensional RSM data regarding the electron-donating ability, inhibitory effect on tyrosinase, superoxide dismutase like activity, and total polyphenol content, the optimum ranges of extraction conditions were found to be at 78~98 W of microwave power, 3~33% ethanol concentration, and 3.6~9 min of extraction time.