• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.493-493
• /
• 2022

본 연구는 식생밀도와 흐름에 따른 수치모형(Nays2D) 하상변동 모의 결과를 서식처 적합도 분석 모델(PHABSIM:Phsical Habtiat Suitability Model)의 입력자료로 활용하여, 식생밀도에 따른 하상 지형 변화가 어류 서식처 적합도에 미치는 영향을 검토한다. 금강 부용리 인근 2km를 대상으로 2차원 모형인 Nays2D를 적용하여 흐름(댐 방류량, 2년 빈도 유량, 100년 빈도 유량 등)과 식생밀도(식생미반영, 현재 밀도, 밀도 감소, 밀도 증가 등)에 따른 하상변동 모의를 실시하였고, 모의 결과값(단면 표고, 유속, 수위)을 물리적 서식처 평가 모델인 PHABSIM의 입력자료로 활용하였다. 피라미 서식을 위한 적정 유속과 수심의 서식처 적합도 지수를 이용하여 각 시나리오 별가중가용면적(WUA: Weighted Usable Area)을 산정하여 비교 분석하여, 식생밀도에 따른 단면 구조의 변화가 WUA 면적과 피라미 서식처 적합도에 어떻게 영향을 미치는지 검토하였다. 그 결과, 수목 밀도를 미반영한 하상변동 모의 결과를 PHABSIM의 입력 자료로 활용하였을 때 가중가용면적이 가장 높았고, 식생 밀도를 증가시킨 하상변동 모의 결과를 입력 자료로 활용하였을 때 WUA값이 가장 낮게 나타났다. 이는 피라미의 서식처 적합도 측면에서 식생이 적어 특정 유량에 따른 하상변동의 폭이 커지면서 저수로 최저하상과 고수부 하상과의 표고차가 상대적으로 낮은 하상 단면이 피라미의 서식처 측면에서 유리할 가능성이 있음을 시사한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.380-386
• /
• 2020

The study was conducted for the safety evaluation of 320 pesticide residues in 768 Lentinula edodes fruit body samples and 143 L. edodes media samples, which are distributed nationwide in South Korea. The monitoring method was the second of the multi-residue methods in the Korean Food Code. GC-ECD, GC-NPD, and GC-MSD were used as evaluation equipment for analysis. Single-analysis of the target pesticides was performed for mepiquat chloride. Through the analysis of collected L. edodes samples, pesticide residues were detected in total seven cases, including four L. edodes fruit body samples and three L. edodes media samples. The detected pesticide residues were carbendazim, diflubenzuron, fluopyram, and dinotefuran. In this study, carbendazim was detected in three L. edodes fruit body samples and one L. edodes media sample. The detected amount of carbendazim was 0.056, 0.17, 0.043, and 0.09 mg/kg, respectively. The amount of carbendazim in the collected L. edodes samples was detected below the MRLs (maximum residue level). The detected amounts of fluopyram and dinotefuran were 0.068 mg/kg and 0.06 mg/kg, respectively. Two pesticide residues were detected in the medium in one case. Mepiquat chloride was not detected in this study. These results suggested that residual pesticides were detected in a small number of collected L. edodes. However, the PLS for unregistered pesticides MRL was 0.01 ppm; therefore, we have to conduct research on preparing safety standards for mushrooms, including L. edodes.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The DTM(Digital Terrain Model) in GIS(Geographical Information System) shows the elevation from interpolation using data points surveyed. In panoramic flat landform, pixel size, resolution of source data may not be the problem in using DTM However, in mountainous landform like Korea, appropriate resolution accuracy of source data are important factors to represent the topography concerned. In this study, the difference in contour interval of source data, the resolution after interpolation, and different data structures were compared to figure out the accuracy of slope calculation using DTM from the topographic maps of Togyusan National Park Two types of GIS softwares, Idrisi(grid) ver. 2.0 using the altitude matrices and ArcView(TIN) ver. 3.0a using TIN were used for this purpose. After the analysis the conclusions are as follows: 1) The coarser resolution, the more smoothing effect inrepresenting the topography. 2) The coarser resolution the more difference between the grid-based Idrisi and the TIN-based ArcView. 3) Based on the comparison analysis of error for 30 points from clustering, there is not much difference among 10, 20, 30 m resolution in TIM-based Airview ranging from 4.9 to 6.2n However, the coarser resolution the more error for elevation and slope in the grid-based Idrisi. ranging from 6.3 to 10.9m. 4) Both Idrisi and ArcView could net consider breaklines of lanform like hilltops, valley bottoms.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.383-386
• /
• 2003

이 연구는 주변국의 국가지도제작기관을 분석하고, 측량 및 지도제작을 위한 수치제작 체계 즉, 수치자료기반을 제작하기 위한 체계를 분석하고자 하는 것

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.39-47
• /
• 2002

For the purpose of data construction for the systematic management and sight-seeing guidance of the natural park, the Kumoh Mt. Province Park was selected as a pilot area. Digital topographic maps, thematic maps and satellite imagery covering the object area were processed and then landform analysis for elevation, slope, aspect and so on was conducted through DEM generation, and the landcover map and NDVI maP were extracted from Landsat TM data. The database was then constructed with these spatial data for GSIS. The image map was generated from IKONOS satellite data, which cover the pilot area data, with one meter resolution and also 3D visualization which was overlaid with main paths up a mountain were conducted. And the moving image files were produced along main paths up including main natural spectacular sights, cultural assets and management facilities. It is expected that the research result can be utilized as the fundamental data for re-assessing suitable land use and constructing Web-based guidance system.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.5-19
• /
• 2001

We are able to construct and utilize DEM(Digital Elevation Model) throughout the NGIS(National Geographic Information System) project. It is important that interpolation methods and appreciate size of grid for the construction of accurate DEM(Digital Elevation Model). There were several references related to the DEM(Digital Elevation Model) construction method, however they couldn't consider various topographical characteristics in the korea. In this study, we recommended that suitable interpolation method for each topographic element. After dividing Poonggi area into mountain, hill, urban, agricultural land, we constructed DEM(Digital Elevation Model) with various interpolation methods and grid size using 1:5,000 digital map. Then evaluated accuracy using elevation data which extracted from air-photo. The interpolation methods were analyzed and compared for various topographical conditions. As a result, Kriging method was superior to TIN method for all the topographical conditions. Another experiment was performed to examine optimal grid space for DEM with each topographical condition. 10m grid space was most suitable for mountain area and hilly districts, while 30m grid space was most suitable for urban area and farm land.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.549-559
• /
• 2012

This paper presents a comparative analysis on the applicability of a priori statistic information about adjustment models when the surface shape parameters are estimated at an arbitrary point in an elevation data. Although the reliability of the estimates are known to be affected by surface condition and the adjustment models, there has been little research in a systematic and detail way. When the raw data have been taken from a real measurement, its true value cannot be known, however, thus this study used simulation data in order to analyze clearly the applicability of adjustment models. The generation of simulated data was performed by superimposing horizontal, slope, and curve surfaces and adding a certain amount of noise. Comparative analysis was performed by associating the a posteriori estimates with a priori statistics of each adjustment models. The experimental results show the estimation characteristics of adjustment models against varying surface conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1484-1491
• /
• 2015

The new cultivar Lentinula edodes, which is named 'Lentinula edodes GNA01', was bred by mating strains isolated from 'L26' and 'Kyoungwon9015' obtained from Sammyungjin Research Institute, Fujian, China. L. edodes GNA01 does not have stipes like L. edodes, although it generally has a similar spherical shape. Moisture and crude protein contents of L. edodes GNA01 were lower than those of L. edodes. Meanwhile, L. edodes GNA01 contained higher levels of crude ash, crude lipid, crude fiber, and carbohydrates than L. edodes. The ${\beta}$-carotene content ($19.05{\mu}g/100g$) of L. edodes GNA01 was about three times higher than that of L. edodes. In addition, vitamin D content ($118.53{\mu}g/100g$) of L. edodes GNA01 was more than twice that of L. edodes. L. edodes GNA01 was a good source of mineral elements, with K and Mg contents of 2,277.50 mg/100 g and 203.15 mg/100 g, respectively. The major fatty acids of L. edodes GNA01 were C16:0 and C18:2, and L. edodes GNA01 had the highest linoleic acid (C18:2) content of 1,087.66 mg/100 g. Total phenol content of L. edodes GNA01 was 12.52 mg GAE/g, and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities and ferric reducing antioxidant power (FRAP) values of L. edodes GNA01 were lower than those of L. edodes at all concentrations. However, DPPH radical scavenging activities and FRAP values of L. edodes GNA01 were above 80% and 0.9 at a concentration of 10 mg/mL, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1787-1791
• /
• 2009

지표수의 유출과정을 설명하는 과정에서 중요인자이며, 생태수문학의 핵심변수이자 기상모형의 중요한 입력변수인 토양수분의 공간적 시간적 특징들은 강우 및 지하수와 토양수분간의 순환 구조를 규명하는데 매우 중요하다. 가장 널리 쓰이는 토양 수분 측정 장비인 TDR 장비 매설에 앞서 대상유역 선정에 대한 여러 가지 고려사항을 검토하고 수치지형 분석 등을 통한 사전분석을 실시하였다. 대상유역을 선정하기 위해서는 대상유역의 자료획득의 용이함, 지정학적, 시스템 운영적 측면에서의 가용성, 그리고 정밀측량 및 부수적요인 등 여러 요소의 고려가 요구된다. 청미천 유역을 대상으로 약 21 개의 대상후보사면을 정밀조사 하였으며, 충청북도 음성군 수레의산 청소련 수련원내의 산지 사면을 측정대상 사면으로, 지정학적 위치, 식생분포, 지질구조 및 심도 등의 토양특성의 고려를 통해서 선정하였다. 또한 대상 사면에 흐름 발생 및 분포를 계산하기 위해서 대상사면의 지표 및 기반암 표고를 정밀 측량하였으며, 기반암 또는 풍화대까지의 깊이를 실측하여 지표면 및 지하면의 수치지형 모형을 구축하였다. 대상사면 및 지하면에 대하여 표고수치지형모형(Digital Elevation Model:DEM)으로 도식한 후 흐름 발생 공간 분포를 계산하였다. 다양한 흐름 발생 알고리즘으로 기여사면적과 지형습윤지수를 계산하였다. 분배알고리즘의 의해 도출된 지형인자들로 인한 흐름발생 공간적 분포특성을 비교하여 센서의 매설 위치를 결정하였다. 센서 매설 위치에 대한 토양시료를 채취하여 토성을 분석한 결과는 미국 농무성 기준에 의한 분류로는 사양토로, 국제토양학회의 분류기준에 따르면 양토로 분류되었다. 대상사면의 유효입력강우를 확보하기위해서 개방공간인 수레의산 청소년수련원과 대상산림의 Canopy하부에 각각 강수측정 시스템을 설치하였고 약 6개월간 성공적으로 자료를 획득하였다.